Network operators around the world have spent huge sums of money in order to secure spectrum for upcoming 3G services. Unfortunately, many operators have found that the financial markets no longer have an unlimited appetite for investing related to telecommunications services. Therefore many of the 3G network deployments envisioned during early 2000 are no longer as certain.
In June 2001, German regulatory agency RegTP announced a partial solution to this dilemma. Essentially the German government has authorized 3G network operators to share antennas, base stations, and even radio network controllers, as long as the individual networks are logically (and legally) controlled separately. Obviously, this will help financially strapped operators to reduce the overall cost of entering the 3G market. Examples of operators which have announced plans to share infrastructure include:
British Telecom (through the German unit VIAG Interkom) and Deutsche Telekom AG have agreed to share network infrastructure. DT expects to save approximately 30% of the expected $7.8 billion it had forecasted to spend on 3G network deployment.
E-Plus, Group 3G, and MobilCom plan to also share 3G network infrastructure in Germany. In this scenario, the consortium has publicly stated that they plan to use common sites, base stations, and radio network controllers.
Finnish operators Telia and Tele-2 plan to share infrastructure via a joint venture, with each service provider operating as an MVNO.
There are at least three ways in which network operators may share 3G infrastructure. Because of the overall tightening experienced recently in financial markets, many analysts expect that some form of all three arrangements will take place for 2003 network deployments:
Operators can agree to share common infrastructure, including core and radio network equipment such as base stations, sites, mobile switching centers, VLRs, and other core network resources. Each operator would maintain its own billing, data servers, and subscriber data services. Essentially the network hardware would be largely shared, but each operator would have its own websites and customer interface.
A second option involves a geographical split in coverage by the operators, with roaming agreements between them. In this concept, each operator would simply agree to a coverage and quality of service level for a given region, then each operator would agree to pay roaming charges to the other operators for traffic within other regions. This scenario will require "hard handoffs" to occur at the geographical boundary.
Thirdly, operators may choose to use common hardware such as base stations, antennas, or even radio network controllers, but would have "ownership" over individual logical areas such as a set of frequency assignments or CDMA codes. This arrangement could allow for individual operators to fund capacity upgrades related only to the frequency assignments or codes that they have allocated to them.
All three of these scenarios allow for the network operators to compete at a consumer level, with varying degrees of differentiation at the network level in terms of quality of service and capacity. The first and third scenario create some unexpected requirements for the RF hardware, especially with regards to bandwidth-sensitive subassemblies such as filters and power amplifiers.
The Multicarrier Power Amplifier
Dozens of countries have licensed UMTS spectrum, and each country has its own unique strategy in terms of the number of operators desired for competition at the consumer level. Worldwide, UMTS service is fairly universal in adopting a pair of 60 MHz frequency bands. (For frequency duplexed systems, uplink frequencies are at 1920 to 1980 MHz, and the downlink frequencies range from 2110 MHz to 2170 MHz.) Many European countries have licensed paired blocks of 10 MHz to 15 MHz to each operator, resulting in four to five operators in each country. On the other hand, some Asian governments have licensed three carriers, allowing for paired 20 MHz frequency blocks.
Figure 1. UMTS frequency allocations.
Because of the nature of these 15 MHz to 20 MHz blocks, many power amplifier manufacturers have tailored their linearization architectures around a narrowband approach. Both feedforward and digital correction techniques have been optimized to linearize the amplifiers only for 15-20 MHz RF bandwidth. This can result in a low-cost design, especially for the 15 MHz applications where digital predistortion can be employed.
On the other hand, German operators and others which plan to share network infrastructure equipment cannot use these amplifiers without making some major compromises. Figure 2 illustrates a preferred assignment of frequency channels in a two-way network sharing example.
Figure 2a) Frequency assignments for 3G operator A.
Figure 2b) Frequency assignments for 3G operator C.
Figure 2c) Frequency assignments for a shared network including both operators A and C.
Figure 3. Performance of a Spectrian MCPA4030 UMTS MCPA with 45 MHz instantaneous bandwidth. (32 W output power)
It is possible to design a multicarrier RF power amplifier and other components to handle the wider bandwidth required for infrastructure sharing scenarios. Figure 3 demonstrates that four W-CDMA carriers can be amplified by the same power amplifier to 32 W output power, while meeting 3GPP linearity specifications.
What if the operators consolidate carriers into one band?
One way to avoid a wider bandwidth requirement for the RF components is to force the frequency assignments for all operators into one relatively narrow band. Figure 4 shows an example of a possible deployment using this concept. This idea may work fairly well during the early days of the network operation, since the capacity required by initial consumer demand should be relatively light. However, the arrangement of all frequency assignments within the spectrum of one carrier poses some interesting upgrade and growth challenges:
What happens when the operators need more capacity? If the shared network is continually upgraded through the addition of frequency assignments, then soon the capacity requirements of two or three operating companies will outstrip the available capacity for three W-CDMA carriers in a 15 MHz band. At that point, the operators would be forced to add new base stations and/or retrofit the amplifiers in order to add a fourth carrier.
What happens when one of the operators decides to roll out a network of their own? As they deploy the initial base stations on their own, the frequency assignments that they add within their own frequency allocation will not be at the same frequency as their existing service. Handoffs from one base station to another will involve a handoff from one frequency to another.
Figure 4. Another idea for sharing infrastructure without wideband RF components.
Network sharing is a relatively new development in the concept of 3G infrastructure deployment. OEM vendors that are launching new base station products will be well served by examining the power amplifiers specified in their systems, and ensuring that the amplifiers can handle the higher bandwidth required for shared systems.