Advertisement
Test and Measurement, Standards / Calibration

Keytroller Introduces CYBERWATCH SMS and CYBERWATCH LAN

February 22, 2013 10:52 am | by WDD Staff | Product Releases | Comments

Keytroller, LLC has announced the introduction of CYBERWATCH SMS and CYBERWATCH LAN – two simple and inexpensive wireless hour meters. SMS communicates through simple text commands from a cell phone, tablet, or PC, and the LAN connects through the Wi-Fi network in the facility.

LISTED UNDER: Test and Measurement, BER Meters | Test and Measurement, Power Meters | Test and Measurement, Standards / Calibration

Agilent Technologies Establishes Capacitance Calibration Standard for AFM-Based Scanning Microwave Microscopy

July 18, 2011 5:35 am | Product Releases | Comments

Agilent Technologies introduced the first commercially available capacitance calibration standard for an atomic force microscope (AFM). The scientific solutions provider issued calibration specifications for capacitance measurements that allow quantitative assessment of material and device properties via its award-winning Scanning Microwave Microscopy Mode.

LISTED UNDER: Services, Calibration / Test | Test and Measurement, Standards / Calibration

Capacitance Calibration Standard for AFM-Based Scanning Microwave Microscopy

July 13, 2011 10:25 am | Product Releases | Comments

Agilent Technologies introduced the first commercially available capacitance calibration standard for an atomic force microscope. The scientific solutions provider issued calibration specifications for capacitance measurements that allow quantitative assessment of material and device properties via its award-winning Scanning Microwave Microscopy Mode.

LISTED UNDER: Services, Calibration / Test | Test and Measurement, Standards / Calibration
Advertisement

Smoke-Detector IC Offers Low-Voltage Operation, Programmable Calibration and Operating Modes

January 10, 2011 8:16 am | Product Releases | Comments

CHANDLER, Ariz.--(BUSINESS WIRE) -- Microchip Technology Inc. announced the RE46C190 3V photo smoke-detector IC with horn driver and boost regulator. The world’s first smoke-detector IC to offer low-voltage operation with programmable calibration and operating modes, the RE46C190 IC enables the desired operating modes to be selected and calibrated during manufacturing....

LISTED UNDER: Services, Calibration / Test | Test and Measurement, Standards / Calibration

PC/104 A/D and D/A Modules Operate from -40° to +85°C Without Requiring Calibration

July 19, 2010 8:07 am | Product Releases | Comments

Two new, low-cost PC/104-compatible analog I/O cards were announced recently by WinSystems. The PCM-MIO-G-AD-1 is a 16-channel, 16-bit analog input card and the PCM-MIO-G-DA-1 is an 8-channel, 12-bit analog output card. Both cards also support 48-lines of digital I/O. These small, 90 mm x 96 mm expansion boards are designed to meet customer requirements for accurate analog and digital I/O over a -40° to +85°C temperature range....

LISTED UNDER: Boards & Modules | Services, Calibration / Test | Test and Measurement, Standards / Calibration

Instrument-Grade Precision Components and Calibration Standards

July 16, 2010 10:03 am | Product Releases | Comments

Maury Microwave announces the introduction of an entirely new line of instrument-grade precision components designed to provide users with the right level of performance at the right price. This new product line, TactiCal™ by Maury, includes calibration standards manufactured to the same high quality and exacting requirements that have made Maury’s metrology-grade products the Gold Standard of the Test & Measurement industry for over 50 yea...

LISTED UNDER: Services, Calibration / Test | Test and Measurement, Standards / Calibration

Companies Combine Efforts to Deliver Optimized WiMAX/GSM-EDGE RF Calibration for Mass Production

June 3, 2009 6:14 am | Product Releases | Comments

Comsys Communication & Signal Processing Ltd and Rohde & Schwarz have announced that they have jointly developed a customized test solution for RF calibration offering customers the most cost-effective test solution for RF testing, calibration and signal testing in devices incorporating Comsys Mobile's ComMAX™ CM1125 mobile WiMAX/GSM-EDGE modules....

LISTED UNDER: Services, Calibration / Test | Test and Measurement, Standards / Calibration

Auto-Calibration Design Kit Evaluates Sensor Components

January 14, 2009 9:43 am | Product Releases | Comments

OPTEK Technology has developed an automatic calibration design kit that provides a simplified means of compensating for device-to-device variation in optoelectronic sensors. The OCB100Kit features a driver board with three different optoelectronic circuits to easily calibrate optoelectronic devices, provide a consistent output signal and shorten the design cycle....

LISTED UNDER: Services, Calibration / Test | Test and Measurement, Standards / Calibration
Advertisement

Calibration Wizard

August 3, 2004 5:13 am | Product Releases | Comments

Boonton Electronics has a new web site that enables users to request any calibration, repair, or both 24 hours a day and instantly receive a Return Material Authorization, RMA, number online. The calibration wizard is accessed from the company's home page. Users can choose from a list of different products and the service to be performed, such as calibration of peak power meter....

LISTED UNDER: Services, Calibration / Test | Test and Measurement, Standards / Calibration

COLFET Low-Noise Calibration Source

February 2, 2004 8:06 am | Product Releases | Comments

Spacek Labs Model CS-K Low-Noise COLFET Calibration Source offers a new way to calibrate K-band radiometers. Instead of a liquid nitrogen-cooled load, a small waveguide-output source (K-connector optional) radiates 33-60 K over 20-24 GHz when biased by +8 VDC, 100 mA max. The CS-K operates at room temperature so no cooling is required....

LISTED UNDER: Services, Calibration / Test | Test and Measurement, Standards / Calibration

Calibration Module

November 24, 2003 7:19 am | Product Releases | Comments

Anritsu introduces the MN4765A optical to electrical (O/E) calibration module that transforms its Lightning 37200C/37300C vector network analyzers (VNAs) into lightwave component analyzers. A characterized, unamplified photodiode module, the MN4765A acts as an optical receiver when used with the 37200C/37300C series VNAs, which have frequency coverage up to 65 GHz....

LISTED UNDER: Services, Calibration / Test | Test and Measurement, Standards / Calibration

Noise Calibration Standards

July 2, 2003 9:47 am | Product Releases | Comments

Noise Com announces the NBS-Series of broadband Noise Calibration Standards for calibration laboratories, radiometer test and verification, and low noise amplifier tests. Using a low-loss waveguide horn design, Noise Com isolates the cold parts from the waveguide, which is controlled at ambient temperature, and avoids condensation of humidity and errors from temperature gradients....

LISTED UNDER: Services, Calibration / Test | Test and Measurement, Standards / Calibration

Modules for Repeatable Calibrations

August 1, 2002 11:07 am | Product Releases | Comments

The 36584 Series AutoCal® modules provide fast, repeatable, and high-quality coaxial calibrations for 2-, 3-, and 4-port S-parameter requirements. The 36584 series covers the 10 MHz to 9 GHz frequency range and can be used with the Scorpion® VNMS. The AutoCal module characterization, which is traceable to NIST, is used to aid in the removal of normal systematic errors....

LISTED UNDER: Boards & Modules | Services, Calibration / Test | Test and Measurement, Standards / Calibration
X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading