Advertisement

Fast-switching Microwave Signal Generator

January 14, 2008 4:30 am | Product Releases | Comments

Anritsu Company introduces the MG37020A fast-switching microwave signal generator that utilizes an advanced VCO-based hardware architecture to achieve best-in-class frequency switching speed of 100 µsec per point. The fast switching speed, and a number of other high-performance specifications and design advantages make the MG37020A well suited for integration into automated test systems used in defense signal simulation and manufacturing AT...

LISTED UNDER: Test and Measurement, Signal Generators

General Purpose Analog Signal Generator

September 26, 2007 8:17 am | Product Releases | Comments

(same as blurb) Rohde & Schwarz announces its SMB100A analog signal generator for R&D as well as production testing in both commercial, aerospace and defense applications. It is available in four models with measurement coverage from 9 kHz to 1.1, 2.2, 3.2 and 6 GHz, and it uses a direct digital synthesizer (DDS) from 9 kHz to 23....

LISTED UNDER: Test and Measurement, Signal Generators

RF Signal Generator

February 9, 2007 5:02 am | Product Releases | Comments

Agilent Technologies, Inc. announces its N9310A RF Signal Generator. It covers ranges from 9 kHz to 3 GHz and a full range of modulation types including AM, FM, phase modulation, pulse modulations and an optional IQ modulator. With an external IQ source, it can generate I/Q modulated signals such as GSM, CDMA and OFDM....

LISTED UNDER: Test and Measurement, Signal Generators
Advertisement

RF Vector Signal Generator for EVM

February 2, 2007 4:48 am | Product Releases | Comments

PrecisionWave Corporation announces the release of the p1511A, a low-cost RF Vector Signal Generator. The p1511A generates digitally modulated and CW signals in the 800 to 1000 MHz and 1700 to 2200 MHz cellular bands for developers and testers of cellular technology-based products. The instrument’s I/Q generator produces high-accuracy signals for any digital modulation scheme used in these bands....

LISTED UNDER: Test and Measurement, Signal Generators

RF Vector Signal Generator

December 27, 2006 11:10 am | Product Releases | Comments

PrecisionWave Corporation introduces its p1411A high-performance RF Vector Signal Generator. The instrument delivers suitable phase noise performance, wide power range and fast reliable electronic switching. The source includes an exclusive spectrum analyzer display along with an internal IQ waveform generator and is available in bench-top or ATE configurations....

LISTED UNDER: Test and Measurement, Signal Generators

Signal Generators up to 6.6 GHz

June 5, 2006 11:44 am | Product Releases | Comments

National Instruments announces seven signal generators for applications from DC to microwave. The RF and microwave signal generators extend PXI to 6.6 GHz for continuous-wave (CW) sourcing, common tunable local oscillator (LO) and stimulus-response applications. All seven generators use direct digital synthesis (DDS) for high-resolution frequency hopping or phase-continuous sweeping for characterization applications....

LISTED UNDER: Test and Measurement, Signal Generators

Signal Generator

August 30, 2004 7:45 am | Product Releases | Comments

Aeroflex announces that it has increased the frequency coverage of its 3410 series digital RF signal generators to 6 GHz to address the need for testing 802.11a wireless local area network (WLAN) devices. The 6 GHz 3416 digital RF signal generator offers all the benefits of the 3410 series RF signal generators including multi-band adjacent channel power, analog and vector modulation, a dual channel arbitrary waveform generator option, and a...

LISTED UNDER: Test and Measurement, Signal Generators

Vector Signal Generators

November 24, 2003 7:19 am | Product Releases | Comments

The R&S SM300 is a vector signal generator that covers 9 kHz to 3 GHz. The instrument covers frequency bands including WLAN, Bluetooth and EMC measurements. The instrument is able to generate digital signals as are required for mobile radio. The signal generator provides frequency and level sweep, a wide variety of analog modulation modes and high spectral purity....

LISTED UNDER: Test and Measurement, Signal Generators
Advertisement

Signal Generators

October 28, 2003 10:16 am | Product Releases | Comments

Novatech introduces model 2910B/RACK, a four channel DDS signal generator in a 1U rack mount instrument case. The 2910B/RACK outputs four programmable frequencies that can be independently set to any value between 100 Hz and 300 MHz with a resolution of 1 μHz. Each frequency is provided on two buffered output connectors, for a total of eight outputs, which are factory configured as +13 dBm sinewaves, TTL clock signals or differential cl...

LISTED UNDER: Test and Measurement, Signal Generators

RF Signal Generators

September 27, 2002 6:33 am | Product Releases | Comments

Available in three frequency ranges from 250 kHz to 2 GHz, 3 GHz and 4 GHz, the 3410 series of digital RF signal generators is used for testing and emulation of 2G, 3G and 4G systems; digital Private Mobile Radio; WLANs, and Bluetooth systems. The 3410 series combines full digital, vector and analog modulation in a 2U rack size....

LISTED UNDER: Test and Measurement, Signal Generators

Vector Signal Generator

January 29, 2002 3:56 am | Product Releases | Comments

Celerity Systems, a division of L-3 Communications, introduced the second generation CS2010 Vector Signal Generator (VSG), updated to meet the needs of developers and manufacturers of cutting edge wireless systems. Performance advancements include a new graphical user interface that maximizes ease of use in both production and R&D applications....

LISTED UNDER: Test and Measurement, Signal Generators

Signal generators deliver low-noise and frequency coverage to 40 GHz

September 20, 2001 11:26 am | Product Releases | Comments

Agilent Technologies Manufacturers of broadband components used in military and satellite systems, as well as Microwave Multiport Distribution Service (MMDS), Local Multipoint Distribution Service (LMDS), and point-to-point microwave systems, require test equipment with broadband frequency coverage and exceptionally low noise....

LISTED UNDER: Test and Measurement, Signal Generators

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading