Advertisement

X-Band Signal Generator Offers Phase-Continuous Linear Frequency Sweeping

July 29, 2010 9:58 am | Product Releases | Comments

Vaunix has introduced an X-band signal generator to their Lab Brick product line. The LMS-123 operates from 8 GHz to 12 GHz, and offers low phase noise, fast 100 usec switching time, and fine 100 Hz frequency resolution. The LMS series also offers advanced operating features such as phase-continuous linear frequency sweeping, optional modulation formats, and internal/external triggering....

LISTED UNDER: Test and Measurement, Signal Generators

Fading Simulator Option Now Available for Broadcast Signal Generator

June 18, 2010 9:12 am | Product Releases | Comments

The R&S SFE Broadcast Tester from Rohde & Schwarz is now available with the new R&S SFE-K30 fading simulator option integrated. The multi-standard broadcast signal generator provides TV and radio consumer equipment manufacturers with all the functions they need for R&D, manufacturing and quality assurance....

LISTED UNDER: Test and Measurement, Signal Generators

Ultra-Low Phase Noise Drives Performance Improvements for Phase Noise Test Sets, Signal Generators and Spectrum Analyzers

June 2, 2010 10:11 am | Product Releases | Comments

Vectron International recently announced its OX-045, an Ultra Low Noise (ULN) oven-controlled crystal oscillator (OCXO). The OX-045 is the inaugural product offering with Vectron’s unique ULN crystal and circuitry technology. The OX-045 improves Vectron’s existing low-noise products by lowering the close-in phase noise by 10 dBc/Hz, allowing customers to improve the performance of their top of the line test equipment....

LISTED UNDER: Services, Calibration / Test | Test and Measurement, Analyzers, Spectrum | Test and Measurement, Signal Generators
Advertisement

Lab Brick Synthesized Signal Generators are Compact and Easy to Use

May 12, 2010 7:12 am | Product Releases | Comments

Vaunix Technology Corporation has announced the introduction of its newest Lab Brick® product line, the LMS series of Synthesized Signal Generators. The first two models released are the LMS-802 and LMS-103 covering 4 to 8 GHz and 5 to 10 GHz respectively. These full-featured signal generators offer low phase noise, 100 microsecond switching time, and 100 Hz frequency resolution....

LISTED UNDER: Test and Measurement, Signal Generators

Signal Generator Simplifies EMC and Radar Test Set-Up

October 8, 2009 12:09 pm | Product Releases | Comments

An internal pulse generator option has been added to Aeroflex's 2023A Series signal generator. This new option greatly facilitates testing in EMC and radar applications by providing an integrated solution that removes the need for an external pulse generator and simplifies test procedures. In addition, the company has enhanced the instrument's internal modulation oscillator to extend its stimulus capabilities.

LISTED UNDER: Services, Calibration / Test | Test and Measurement, Signal Generators | Radar

Sorting Out New RF Signal Generator Capabilities

January 30, 2009 9:05 am | Product Releases | Comments

Modern wireless communications testing requires understanding the new capabilities offered by the latest RF signal generators. By Ron Rausch, Keithley Instruments, Inc. There are many different kinds of RF signal generators from which to choose. No single generator fits all user requirements. This article is a guide to help you select the best RF signal generator for your needs, and it focuses on selecting signal generators commonly used f...

LISTED UNDER: Test and Measurement, Signal Generators

Signal Generator Exhibits Short Frequency- and Level-Setting Times

November 7, 2008 7:46 am | Product Releases | Comments

Rohde & Schwarz’s R&S SMC100A 1/2 × 19”, 2 HU signal generator shows frequency- and level-setting times of <5 ms from 9 kHz to 1.1 GHz or 3.2 GHz. The instrument integrates Integrating AM/FM/fM and pulse modulation. The unit displays a typical single-sideband phase noise of -111 dBc (f = 1 GHz) at 20 kHz offset in the 1-Hz measurement bandwidth, typical broadband noise of -148 dBc, typical output power of >17 dBm, and level accur...

LISTED UNDER: Test and Measurement, Signal Generators

Fast Switching RF & Microwave Synthesized Signal Generator

June 16, 2008 10:52 am | Product Releases | Comments

PNS? The 2520GTA series signal generator delivers extremely fast switching speeds, high output power, and low residual phase noise in a single unit. The 2520GTA series signal generator is offered in a frequency range of 100 MHz to 20 GHz with a frequency resolution of 0.001 Hz over the entire band. Loaded with standard performance features such as high time base stability and an optional feature of high leveled output power, the 2520GTA mak...

LISTED UNDER: Test and Measurement, Signal Generators
Advertisement

Signal Generators Cover a Wide Range of Frequencies

May 8, 2008 11:57 am | Product Releases | Comments

Portable and Lightweight Low Levels of Adjacent Channel Power Peak Output Power of Up to +16 dBm The IFR 3410 series from Aeroflex, Inc. contains portable, lightweight signal generators that cover a wide range of carrier frequencies to 6 GHz. High quality analog and vector modulation capabilities make them suitable for research, development and manufacturing applications....

LISTED UNDER: Test and Measurement, Signal Generators

Signal Generator Covers RF and Microwave Frequencies

April 11, 2008 7:42 am | Product Releases | Comments

Anritsu Company introduces its MG37020A fast-switching microwave signal generator that covers both RF and microwave frequencies from 10 MHz to 20 GHz. The device, with 100 μsec per point typical switching speed, is a suitable signal source for RF and microwave applications requiring frequency agility, including data intensive applications such as antenna testing and satellite payload testing....

LISTED UNDER: Test and Measurement, Signal Generators

PXI Express RF Vector Signal Generator with 20 MHz Onboard Signal Processing

April 11, 2008 7:42 am | Product Releases | Comments

National Instruments releases its NI PXIe-5672 RF vector signal generator that delivers signal generation from 250 kHz to 2.7 GHz, 20 MHz of instantaneous bandwidth and real-time data streaming at up to 25 MS/s. It also features a PXI Express interface that makes it possible to stream data from hard disk or PC memory at the full output rate of the instrument....

LISTED UNDER: Test and Measurement, Signal Generators

RF Signal Generator Performs MIMO Testing

April 11, 2008 7:42 am | Product Releases | Comments

Rohde & Schwarz offers its SMU200A RF signal generator as well as its AMU200A baseband generator and fading simulator that combine everything required for 2ࡨ MIMO (multiple input multiple output) tests in one instrument. Both signal generators can be equipped with two signal sources each and one internal 2ࡨ MIMO fading simulator....

LISTED UNDER: Services, Calibration / Test | Test and Measurement, Signal Generators

Microwave Analog Signal Generator Features Fast Switching Speeds

April 11, 2008 7:42 am | Product Releases | Comments

Agilent Technologies, Inc. announces its Model N5183A compact microwave analog signal generator that is an extension to its MXG signal generator platform, providing frequency coverage to 20, 32 or 40 GHz. Featuring fast frequency switching speeds, high reliability and easy self-maintenance, this mid-performance signal generator provides the performance required to make a range of broadband measurements....

LISTED UNDER: Test and Measurement, Signal Generators

Analog Signal Generator Features Fast Switching Speeds

April 3, 2008 10:53 am | Product Releases | Comments

Agilent Technologies, Inc. announces its compact microwave analog signal generator that is an extension to its MXG signal generator platform, providing frequency coverage to 20, 32 or 40 GHz. Featuring fast frequency switching speeds, high reliability and easy self-maintenance, this mid-performance signal generator provides the performance required to make a range of broadband measurements....

LISTED UNDER: Test and Measurement, Signal Generators

Signal Generators Gain Support for 1xEV-DO Rev. A

April 3, 2008 10:53 am | Product Releases | Comments

Rohde & Schwarz introduces an option for its high-performance RF and baseband signal generators that allows the instruments to generate signals in conformance with Rel. 0 and Rev. A of the CDMA 1xEV-DO standard. The capability is available as Option SMx-K47 for the SMU200A, SMJ100A and SMATE200A vector signal generators, as well as the AMU200A baseband signal generator/fading simulator and as AFQ-K247 for the AFQ100A IQ modulation gener...

LISTED UNDER: Test and Measurement, Signal Generators

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading