Tektronix, Inc. has unveiled its next generation of arbitrary waveform generators that offer up to 50 GS/s sample rate performance. With a combination of high sample rate, long waveform memory, and deep dynamic range, the new AWG70000 Series...LISTED UNDER: Test and Measurement, Function Generators | Test and Measurement, Noise Generators | Test and Measurement, Signal Generators
B&K Precision announced two new DDS (direct digital synthesis) sweep function generators, models 4007B and 4013B, which improve upon the former models 4007DDS and 4013DDS with an enhanced user interface as well as lower prices. Models 4007B and 4013B can generate sine and square waveforms from 0.1 Hz to 7 MHz and 0.1 Hz to 12 MHz, respectively.LISTED UNDER: Test and Measurement, Function Generators
PCB Piezotronics introduces Model 401B04 ICP® sensor simulator, which installs in place of an ICP® sensor and accepts test signals from a voltage function generator. This model allows test engineers to make sure the entire measuring chain consisting of cable, ICP® or IEPE signal conditioning, and data acquisition system is set up properly and ready to take measurements; which is especially important when the cost of running a test is very expensive.LISTED UNDER: Services, Calibration / Test | Test and Measurement, Function Generators
Working closely with the test equipment vendor is required in order to synchronize feature implementation, reference specifications and timely delivery of the test equipment software. By Paul Gooding, Rohde & Schwarz click to enlarge Figure 1.
Protek Test and Measuremet offers its Model B8040FD DDS function generator. This high stability direct digital synthesis dual-output function generator has less than -54 dBc (Sine wave) harmonic distortion and a keyboard for rapid entry of waveform parameters. It delivers 40-ppm long-term and 1-ppm short-term stability; it generates waveforms including Sine, Square, Pulse, Triangle, exponential up and exponential down, Ramp, Sine (x) x and ...LISTED UNDER: Boards & Modules | Test and Measurement, Function Generators
The Dual-Channel Arbitrary/Function Generator R&S AM300 has been added to the Rohde & Schwarz Smart Instruments family. As an I/Q generator, it can be used to generate complex digitally modulated signals as required for mobile radio. As a function generator, it can be used to output all conceivable standard waveforms on two independent channels....LISTED UNDER: Test and Measurement, Function Generators
Novatech announces the Model 2904A, a precision DDS function generator in a tabletop instrument case. The 2904A outputs Sine, Cosine and TTL signals simultaneously. The Sine and Cosine output amplitudes are programmable with 12-bits of resolution for up to 24 dBm (10 Vpp into 50 Ω) output power....LISTED UNDER: Test and Measurement, Function Generators
TEGAM, Inc. has introduced the Model 3102 Synthesized Function/ARB Generator, which enables engineers and service technicians to define and output a wide range of electrical waveforms for circuit design, verification, and troubleshooting applications. The Model 3102's ability to produce sine, damped sine, square, and triangle waves, voltage ramps, noise, and arbitrary waveforms of virtually any shape makes it one of the most versatile wave ...LISTED UNDER: Test and Measurement, Function Generators