Advertisement

AC/DC Switches

August 3, 2004 5:13 am | Product Releases | Comments

Power Sources announces the Cincon CFM40 and CFM60 series' of AC/DC switching power supplies which are suitable for communications, instrumentation, IT, and process control applications. The CFM40 series is a 40 W product with single output versions from 3.3 VDC to 48 VDC and has recently been expanded to include dual and triple output models....

LISTED UNDER: Switches, IC
Advertisement

Protected-Power Distribution Switches

April 7, 2004 11:03 am | Product Releases | Comments

Two power control solutions for stationary and portable electronic systems such as PCs, servers, laptops, and protected battery packs are introduced by Micrel Semiconductor. Power-switching solutions handling currents in excess of 3 A requires the use of external power FETs. The MIC2044/45 changes that by integrating an NMOS pass element with control circuitry into a TSSOP package to control load currents in excess of 6 A....

LISTED UNDER: Switches, IC

WLAN Antenna Switches

March 15, 2004 9:53 am | Product Releases | Comments

Toshiba introduces two new antenna switches that combine low insertion loss and low voltage operation with small UF6 or TU6 packages. The TG2216TU and TG2211FT are single pole, double throw switches that are suitable for use with antennas in WLAN applications. The TG2211FT is a 2.4 GHz antenna switch, while the TG2216TU is optimized for medium power applications....

LISTED UNDER: Switches, IC

Surface Mount Reed Switches

March 15, 2004 9:53 am | Product Releases | Comments

Coto Technology introduces three additions to its line of surface mount reed switches. The RI-80, miniature SMT switches, with 5 mm max glass length, feature a wide flat lead design to provide both stability during component placement and improved solderability for surface mounted applications. The RI-80SMD is Coto's smallest SMT switch; it is available in three different Gull or "J" lead configurations....

LISTED UNDER: Switches, IC

15% Price Reduction on Vacuum Reed Switches

February 2, 2004 8:06 am | Product Releases | Comments

Hermetic Switch announces a 15% reduction on the price of its high voltage line of vacuum reed switches. Improved manufacturing processes that result in greater throughput enable the company to pass the savings on to its customers. The price reduction applies to models HSR-V7K, HSR-V10K, and HSR-V15K....

LISTED UNDER: Switches, IC

USB Switches

January 21, 2004 10:48 am | Product Releases | Comments

California Micro Devices announced three USB overcurrent protection switches. The CM3511/12/13 USB overcurrent switches support four USB ports in a single device. This allows next-generation PCs, which will have up to 8 ports per desktop, or 3 to 4 USB ports per notebook, to reduce the number of overcurrent protection devices per system by 50% vs....

LISTED UNDER: Switches, IC

Coaxial Switches

January 21, 2004 10:48 am | Product Releases | Comments

RLC Electronics' terminated single pole, two position coaxial switch line provides reliability and long life. This switch features low insertion loss and VSWR over the DC to 40 GHz range while maintaining high isolation. Power rating RF cold switching is 2 watts average. Impedance is 50 Ω....

LISTED UNDER: Switches, IC

Analog Switches

November 24, 2003 7:19 am | Product Releases | Comments

STMicroelectronics introduces a pair of SPDT analog switches whose packaging and low insertion losses make them suited for use in consumer products including audio and video devices, cellphones, notebook PCs, PDA and many forms of portable instrumentation. The STG3699 is a quad SPDT analog switch and the STG3684 is a dual SPDT analog switch....

LISTED UNDER: Switches, IC

Military Switches

November 24, 2003 7:19 am | Product Releases | Comments

Electroswitch introduces snap-action switches for military applications. Designed for either AC or DC switching, these switches have quick make and break action (approximately 10 milliseconds contact transfer time). Standard models are available with up to 12 poles and up to 4 positions. The ends of the stationary contacts extend outside the insulating disks to serve as connecting terminals....

LISTED UNDER: Military-Aerospace | Switches, IC

Power Switches

November 24, 2003 7:19 am | Product Releases | Comments

Fairchild introduces three power switch products feature burst mode operation for stand-by mode (under 0.1 W @ 265 VAC). The FSD200, FSD210, and FSDM311 combine a fully avalanche-rated SenseFET (LDMOS) for current sensing (650 V or 700 V minimum breakdown ratings) with a voltage mode PWM IC, and are equipped with a built-in start-up switch....

LISTED UNDER: Switches, IC

Crosspoint Switches

November 3, 2003 6:54 am | Product Releases | Comments

Maxim introduces the MAX9392/MAX9393 dual, high-performance, 2 × 2 LVDS crosspoint switches. The MAX9392 accepts LVDS, HSTL, and other GND-referenced input signals. The MAX9393 accepts LVPECL, CML, and other Vcc-referenced differential input signals. Each channel is independently programmed to any input or both outputs, allowing each channel to be configured as a 1:2 splitter, a 2:1 multiplexer, dual repeater, or a 2 × 2 crosspoint ...

LISTED UNDER: Switches, IC

Tap Switches

November 3, 2003 6:54 am | Product Releases | Comments

Rotary tap switches are available in molded- and fabricated-base designs, and can be configured for either manual or motor operation. With dual (continuous/intermittent) ratings ranging from 100/150 to 1600/2400 amps at 600 volts, they are available in single-, two-, or three-phase models. Options include increased voltage and amperage ratings, angled terminals, key-interlock provisions, auxiliary switches for remote indication, an "OFF...

LISTED UNDER: Switches, IC

GaAs MMIC Switches

October 28, 2003 10:16 am | Product Releases | Comments

Housed in NEC's low profile, flat lead TK package, the UPG2030TK measures 1.1 × 1.5 × 0.5 mm. The UPG2030TB is available in NEC's SOT-363 style TB package. Both versions deliver the same "no compromises" performance: frequency range is 0.5 to 2.5 GHz; P 1dB is +30 dBm typical @ 2....

LISTED UNDER: Switches, IC | Semiconductors, MMIC

Electromechanical Switches

October 28, 2003 10:16 am | Product Releases | Comments

Dow-Key introduces a family of VXI switches with SMA connectors offering three configurations: SP6T, Double SPDT, and a transfer switch. DC characteristics include 20 to 28 VDC (24 VDC nominal) operation voltage. Equipped with a failsafe actuator, these devices switch in 20 ms maximum. All three switches have the same control connector, but each model has its own pin-out that plugs into the universal control circuitry....

LISTED UNDER: Electromechanical / Mechanical | Electromechanical / Mechanical | Switches, IC

SPDT Switches

September 2, 2003 8:42 am | Product Releases | Comments

Hittite introduces two GaAs MESFET SPDT switches in a low cost plastic surface mount plastic packages designed for CATV and cellular applications demanding high isolation. The HMC348LP3 covers DC to 2.5 GHz and offers integrated 75 Ohm terminations, an "all off" state, > 80 dB isolation at 5 MHz and > 55 dB isolation up to 1 GHz....

LISTED UNDER: Switches, IC

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading