AT4 Wireless Announces the Availability of NFC Forum Test Cases on its RIDER NFC Test Solution
June 21, 2010 10:34 am | Product Releases | CommentsAT4 has released test cases that will allow NFC manufacturers to debug and pretest their NFC implementations prior to the beginning of the Official Certification later this year. After being selected to partner with the NFC Forum for the implementation of the NFC Forum Digital Protocol test cases in its RIDER NFC test solution, AT4 wireless has been working during the last months to achieve the important goal of having a first package of...
LISTED UNDER: Services, Calibration / TestRMS Power Detectors Support Cellular, LTE/ WiMAX/4G, Test Equipment & Military Applications to 5.8 GHz
June 21, 2010 5:27 am | Product Releases | CommentsHittite Microwave Corporation has launched two low cost, highly flexible RMS Power Detectors for RF power measurement/control in Cellular/3G, LTE/WiMAX/4G, broadband, test equipment and military applications between DC and 5.8 GHz. The HMC1010LP4E offers 60 dB dynamic range over DC to 3.9 GHz. The HMC909LP4E offers a broadband single-ended RF input with 40 dB dynamic range over DC to 5.
LISTED UNDER: Military-Aerospace | Services, Calibration / TestMeasurement Suite for Production Test System Now Supports 1xEV-DO Rev B
June 21, 2010 5:27 am | Product Releases | Comments | LISTED UNDER: Services, Calibration / TestAeroflex Launches Single-box Multi-RAT Tester for Multi-mode eHRPD/LTE Handsets
June 18, 2010 9:12 am | Product Releases | CommentsAeroflex announces the launch of a new option for the 7100 LTE Digital Radio Test Set that supports CDMA-based data standards such as Evolution-Data Optimized (EV-DO) and evolved High Rate Packet Data (eHRPD) as well as LTE-eHRPD hand-over. As CDMA network operators migrate towards LTE, the devices used by their subscribers will need to operate with both the legacy EV-DO sectors of the network and those that have been upgraded to LTE, a...
LISTED UNDER: Services, Calibration / TestCambridge Consultants and Qualcomm Develop Mobile Health Technology Platform
June 18, 2010 7:42 am | Product Releases | CommentsCambridge Consultants announces a new platform for enabling wireless connectivity from a medical device to online health services, compliant to the Continua Health Alliance standard. The new, low-cost platform is a combination of Qualcomm Incorporated's Wearable Mobile Device cellular module and Cambridge Consultants' Vena software stack....
LISTED UNDER: Services, ConsultingOne-Box Tester to Support Transmit and Receive Testing of LTE Devices Using Signaling
June 15, 2010 6:33 am | Product Releases | CommentsAnritsu Company introduces hardware and software for its MT8820C that extend the capability of the tester to support measurement of parametric data during an LTE test mode call. Capable of conducting TS36.521-1-compliant transmit and receive tests, the enhanced MT8820C can now serve as an Enhanced Node B (eNode B) signaling simulator, adding to current capability for non-signaling test....
LISTED UNDER: Services, Calibration / TestTest Solution Addresses the Rapidly-Growing Demand for Validating Wi-Fi Positioning Performance of Mobile Devices
June 9, 2010 7:51 am | Product Releases | CommentsSUNNYVALE, Calif.--(BUSINESS WIRE)--The rapidly-growing demand for ubiquitous location-based applications is driving the use of Wi-Fi positioning, in addition to existing location technologies such as A-GPS and Cell ID, to provide subscribers with location information more quickly and in more places....
LISTED UNDER: Services, Calibration / TestChipset Software Supports picoChip Femtocell Test
June 9, 2010 7:51 am | Product Releases | CommentsAgilent Technologies Inc. and picoChip announce a high-volume manufacturing test solution for 3G femtocell products. The jointly developed solution is based on picoChip’s picoXcell semiconductors and software, and Agilent’s N7310A chipset software. The new integrated manufacturing test solution delivers rapid calibration and verification testing capabilities for original design manufacturers (ODMs) and contract manufacturers (CMs)....
LISTED UNDER: Services, Calibration / TestMicrowave Office Software Dramatically Cuts Simulation Times of Multitest’s High-Performance IC Test Boards
June 4, 2010 8:00 am | Product Releases | CommentsMultitest, one of the world’s leading manufacturers of test equipment for semiconductors integrated circuits, provides its clients with highly innovative test handling solutions, custom-tailored to fit individual needs and requirements. Because high throughput rate and accuracy are critical, Multitest uses AWR’s Microwave Office with ACE™ (automated circuit extraction) to simulate and optimize its PCB designs simply, accurately, and eff...
LISTED UNDER: Boards & Modules | Services, Calibration / TestUltra-Low Phase Noise Drives Performance Improvements for Phase Noise Test Sets, Signal Generators and Spectrum Analyzers
June 2, 2010 10:11 am | Product Releases | CommentsVectron International recently announced its OX-045, an Ultra Low Noise (ULN) oven-controlled crystal oscillator (OCXO). The OX-045 is the inaugural product offering with Vectron’s unique ULN crystal and circuitry technology. The OX-045 improves Vectron’s existing low-noise products by lowering the close-in phase noise by 10 dBc/Hz, allowing customers to improve the performance of their top of the line test equipment....
LISTED UNDER: Services, Calibration / Test | Test and Measurement, Analyzers, Spectrum | Test and Measurement, Signal GeneratorsLow Pass Filters Designed for Test Equipment and General Lab Use
June 1, 2010 11:39 am | Product Releases | CommentsCrystek has introduced a new line Low Pass Filters, the CLPFL Series. Encased in a rugged SMA housing, this filter line is designed for test equipment and general lab use. Five models, with frequency ranges from DC to 100 through 500 MHz, compose the CLPFL line. The Crystek CLPFL Low Pass Filter line has excellent out-of-band rejection, and features 7th Order Butterworth Response and 50 ohm SMA connectors....
LISTED UNDER: Services, Calibration / Test | Filters, ICCambridge Consultants Reaches New Milestone in Iridium Innovation
May 22, 2010 10:07 am | Product Releases | CommentsCambridge Consultants has achieved another milestone in its collaborative relationship with Iridium Communications Inc. (Nasdaq:IRDM). In coordination with Iridium's engineering team, Cambridge Consultants led the design process of the new Iridium 9602™ short burst data (SBD) transceiver, which is nearly 70% smaller than the previous model, contains approximately half the number of parts and is now commercially available....
LISTED UNDER: Services, ConsultingExperts in MIMO Channel Emulation Share Knowledge and Experience for Testing Beamforming Applications in TDD Networks
May 19, 2010 12:13 pm | Product Releases | CommentsAzimuth Systems, Inc. recently announced that the company will be presenting a series of beamforming seminars to select companies in Asia, North America and Europe. These seminars will explain beamforming, how it works, and the critical requirements that need to be met for accurate lab-based testing, as well as provide examples of typical test cases and results....
LISTED UNDER: Services, Calibration / TestHandheld Digital Multimeters for Wireless Engine Test System
May 12, 2010 6:59 am | Product Releases | CommentsAgilent Technologies Inc. announces that Yulista Management Services, a contractor for the U.S. Army, has selected the Agilent U1252A handheld digital multimeters (DMMs) for repair and troubleshooting of Army vehicles. The DMMs will be used by soldiers worldwide as part of a wireless engine test system in the vehicles....
LISTED UNDER: Services, Calibration / TestDigi Announces Wireless Green Design Contest Grand Prize Winners
May 11, 2010 9:40 am | Product Releases | CommentsMINNETONKA, Minn. -- Digi International announced that Danish Shrestha and Andrew Popp of “Team Hilotec” have been awarded $7,500 as the grand prize winners of Digi’s wireless green design contest. The pair used iDigi™ wireless development kits to develop a prototype system for The Palms of Destin Resort in Destin, Fla.
LISTED UNDER: Services, Calibration / Test
