Advertisement

Rohde & Schwarz Provides All-In-One LTE Drive Test Scanner

November 10, 2011 7:34 am | Product Releases | Comments

Rohde & Schwarz has developed a multi-functional universal radio network analyzer that provides advanced drive testing. The R&S TSMW drive test scanner supports LTE (Long Term Evolution) formats in all current and future wireless communication bands, with no additional costs. The R&S TSMW drive test scanner also supports GSM, WCDMA and CDMA2000 1xRTT / 1xEV-DO scanning at the same time.

LISTED UNDER: Services, Calibration / Test

Tektronix Announces Industry’s Fastest Coherent Lightwave Signal Analyzer

November 2, 2011 10:37 am | Wireless Design & Development | Product Releases | Comments

Tektronix announced the OM4106D Coherent Lightwave Signal Analyzer – the first coherent test system with 33 GHz bandwidth support. This industry-fastest performance is achieved through tight integration with the DPO70000D Series oscilloscopes for exceptional real-time performance along with purpose-built algorithms with best laser phase tolerance, no pattern length limitation and insightful displays for fast analysis and debugging of high...

LISTED UNDER: Services, Calibration / Test | Test and Measurement, Analyzers, Spectrum | Receivers, Other

Tektronix Announces Industry’s Fastest Coherent Lightwave Signal Analyzer

November 2, 2011 10:37 am | Wireless Design & Development | Product Releases | Comments

Tektronix announced the OM4106D Coherent Lightwave Signal Analyzer – the first coherent test system with 33 GHz bandwidth support. This industry-fastest performance is achieved through tight integration with the DPO70000D Series oscilloscopes for exceptional real-time performance along with purpose-built algorithms with best laser phase tolerance, no pattern length limitation and insightful displays for fast analysis and debugging of high-performance optical designs.

LISTED UNDER: Services, Calibration / Test | Test and Measurement, Analyzers, Spectrum | Receivers, Other
Advertisement

Automotive AntennaGuard Series with 0603 MLV Provides Fastest ESD Response

October 20, 2011 7:33 am | Product Releases | Comments

AVX Corporation has expanded its automotive multilayer varistor (MLV) product offering to include an ultra-low capacitance 0603 device that provides sub-1nS response to ESD strikes. The AEC Q200-qualified Automotive AntennaGuard Series MLV devices deliver low insertion loss, low leakage current and unsurpassed reliability compared to diode options.

LISTED UNDER: Automotive | Automotive | Services, Calibration / Test

Compact and Flexible LTE RF Design Verification and Pre-conformance Test System

October 5, 2011 7:19 am | Product Releases | Comments

Following in the footsteps of its T4010 LTE RF conformance testing solution, AT4 wireless has introduced the most compact and flexible LTE RF test system in the market for design verification and pre-conformance, the T4010 DV. This new test system offers a unique environment that allows the creation and/or customization of dedicated RF parametric test cases, based on configurable test methods.

LISTED UNDER: Services, Calibration / Test

14-bit ADCs Address Requirements for Communications, Instrumentation and Test

August 22, 2011 6:52 am | Wireless Design & Development | Product Releases | Comments

Analog Devices released single and dual-channel 14-bit high-speed A/D converters for use in communications, instrumentation and test and measurement applications. The new converters are asserted to meet the performance and small size requirements of the latest 3G and 4G multi-standard cellular infrastructure equipment such as CDMA2000, WB-CDMA, LTE, TD-SCDMA and multi-carrier GSM.

LISTED UNDER: Services, Calibration / Test | Receivers, Other

TÃœV Rheinland Introduces Improved ZigBee Test Environment

August 18, 2011 10:39 am | Product Releases | Comments

TÃœV Rheinland, one of only three organizations authorized to test products for compliance to ZigBee standards, has developed a proprietary software-based testing system that is faster and more flexible than previous testing environments. ZigBee is the technology for low-cost, low-power wireless sensor and control networks....

LISTED UNDER: Services, Calibration / Test

Portable Test Instrument for Electrical and Maintenance Applications

August 17, 2011 9:39 am | Product Releases | Comments

Yokogawa Corporation of America is pleased to announce the release of another high quality and well engineered product, the CW10 Clamp-On Power Meter. This unit combines the basic functionality of a standard clamp on tester, digital multimeter, and power monitor to initially diagnose maintenance and electrical issues before more expensive and sophisticated equipment may be required to analyze the performance of motors, generators and other power related equipment.

LISTED UNDER: Services, Calibration / Test
Advertisement

TÃœV Rheinland Introduces ZigBee Testing Environment

August 16, 2011 9:19 am | Product Releases | Comments

TÃœV Rheinland, one of only three organizations authorized to test products for compliance to ZigBee standards, has developed a proprietary software-based testing system that is faster and more flexible than previous testing environments. ZigBee is the technology for low-cost, low-power wireless sensor and control networks....

LISTED UNDER: Services, Calibration / Test

Line Impedance Stabilization Network for Conducted Emissions Testing of GCPCs

August 11, 2011 6:46 am | Product Releases | Comments

TESEQ introduces a new Line Impedance Stabilization Network (LISN) for conducted emissions testing of Grid Connected Power Conditioners (GCPC). The DC-LISN-M2-25-V1 is designed for measuring unsymmetrical disturbances on DC power ports in the frequency range from 150 kHz to 30 MHz. Research results have shown that a typical artificial mains V-network as described in CISPR 16-1-2 cannot be used for the assessment of unsymmetrical disturbances of a photovoltaic inverter’s DC port.

LISTED UNDER: Services, Calibration / Test

LTE Development Testing Made Easy with Toolset

August 11, 2011 5:33 am | Product Releases | Comments

Anite announced the availability of Scenario Mode, an enhancement to its Development Toolset suite for wireless device and chipset development that allows test engineers to rapidly design test scenarios (test scripts) through an easy-to-use graphical interface. With Scenario Mode, even engineers without specific programming skills are able to develop new test scripts which increases total script creation and cuts development time.

LISTED UNDER: Services, Calibration / Test

Compliance 5 EMC Test Software Adds DO-160 Module for Aerospace Applications

August 4, 2011 10:30 am | Product Releases | Comments

Teseq introduces a new aerospace test application for use in its Compliance 5 EMC test software. The DO-160 RF emissions and immunity test module makes set-up and testing fast and easy. Preloaded, standard hardware configurations and limit lines enable users to quickly configure their hardware and select the required test.

LISTED UNDER: Military-Aerospace | Services, Calibration / Test

EMC Test Software Adds DO-160 Module for Aerospace Applications

July 28, 2011 8:03 am | Product Releases | Comments

Teseq Inc. introduced an aerospace test application for use in its Compliance 5 EMC test software. The DO-160 RF emissions and immunity test module is asserted to make set-up and testing fast and easy. Preloaded, standard hardware configurations and limit lines enable users to quickly configure their hardware and select the required test.

LISTED UNDER: Military-Aerospace | Services, Calibration / Test

McObject’s New eXtremeDB Cluster Provides a Powerful Distributed Database Solution for Real-Time Applications

July 20, 2011 9:36 am | Wireless Design & Development | Product Releases | Comments

McObject announced the release of eXtremeDB Cluster, the first clustering database system built from the ground up for distributed embedded software as well as real-time enterprise applications. eXtremeDB Cluster manages data stores across multiple hardware nodes, dramatically increasing the net processing power available for data management, reducing system expansion costs, and delivering a more scalable and reliable database solution for ...

LISTED UNDER: Services, Consulting

McObject’s New eXtremeDB Cluster Provides a Powerful Distributed Database Solution for Real-Time Applications

July 20, 2011 9:36 am | Wireless Design & Development | Product Releases | Comments

McObject announced the release of eXtremeDB Cluster, the first clustering database system built from the ground up for distributed embedded software as well as real-time enterprise applications. eXtremeDB Cluster manages data stores across multiple hardware nodes, dramatically increasing the net processing power available for data management, reducing system expansion costs, and delivering a more scalable and reliable database solution for increasingly data-intensive real-time applications.

LISTED UNDER: Services, Consulting

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading