Advertisement

New Module Triples EMC Testing Range to 18 GHz in Digital Receiver

August 9, 2012 7:20 am | Product Releases | Comments

Teseq Inc. now offers a high-performance digital EMC/EMI receiver module that extends the frequency range of the PMM 9010 receiver system from 6 GHz to 18 GHz.  Ideal for use in commercial test labs and by in-house manufacturers’ labs, the upgraded PMM system can now be used for a wider range of EMC testing.

LISTED UNDER: Services, Calibration / Test

Receiver Enhances Compliance Testing through Input Sensitivity

August 8, 2012 6:49 am | Wireless Design & Development | Product Releases | Comments

Agilent Technologies Inc. announced the introduction of the N9038A MXE EMI receiver , which is designed for laboratories that perform compliance testing of electrical and electronic products. The MXE enhances electromagnetic interference (EMI) measurement accuracy and repeatability with a displayed average noise level (DANL) of -163 dBm at 1 GHz.

LISTED UNDER: Services, Calibration / Test | Receivers, Other

The R&S ESR reduces testing times, more reliably detects EMI

August 8, 2012 6:40 am | Wireless Design & Development | Product Releases | Comments

Rohde & Schwarz introduces the new R&S®ESR EMI test receiver whose broadband architecture allows standard-compliant EMI measurements up to 6000 times faster than other solutions. Comprehensive diagnostic tools such as spectrogram display, realtime spectrum analysis and IF analysis help developers detect and eliminate EMI.

LISTED UNDER: Services, Calibration / Test | Receivers, Other
Advertisement

T62 Recon Test Set

July 16, 2012 5:48 am | Product Releases | Comments

Platinum Tools is proud to announce that the new T62 Recon Test Set is now shipping. With an MSRP of $269.95, the Recon Test Set delivers more line condition and status information than any other telephone line tester in the world. The new Platinum Tools T62 Recon Test Set comes with a slate of features not found on any other ‘butt’ set in the world.

LISTED UNDER: Services, Calibration / Test

New High-Speed DSA Provides High Performance for BTS & Test Applications

June 26, 2012 5:49 am | Product Releases | Comments

TriQuint Semiconductor, Inc. has released a new 7-bit digital step attenuator (DSA) that delivers the low insertion loss, high speed, linearity and and advanced, fine-grain resolution required by designers of base station transceivers, test equipment and many other similar applications. The TQP4M9083 provides up to 31.

LISTED UNDER: Services, Calibration / Test

New 5-6000MHz Phase Noise Tester

June 19, 2012 11:16 am | Product Releases | Comments

Saelig Company, Inc . has introduced the APPH6000RM-IS - an all-in-one comprehensive automated measurement system for evaluating RF signal sources. SSB phase noise, amplitude noise, AM noise measurement, additive or residual noise characterization, and baseband noise measurements up to 6GHz can easily be made for sources such as crystal oscillators, PLL synthesizers, clocks, phase-locked VCOs, DROs, and many others.

LISTED UNDER: Services, Calibration / Test

VoLTE and SMS-over-IMS Device Testing Using MD8475A Signaling Tester with Integrated IMS

June 18, 2012 6:12 am | Product Releases | Comments

Anritsu Company announces the availability of integrated IP Multimedia Subsystem (IMS) functionality for its MD8475A Signaling Tester. Adding this LTE functionality extends the capabilities of the MD8475A’s SmartStudio graphical network simulation environment to include Call Session Control Function (CSCF), Dynamic Host Configuration Protocol (DHCP), and Domain Name System (DNS) servers, using either IPv4, IPv6, or dual-stack addressing.

LISTED UNDER: Services, Calibration / Test

Wireless Device Precompliance Testing goes into the Lab with Automated Tests

June 12, 2012 11:10 am | Wireless Design & Development | Product Releases | Comments

In wireless device precompliance testing, the compact R&S DST200 RF diagnostic chamber from Rohde & Schwarz now automatically sets the equipment under test (EUT) to the required position. The new options make the R&S DST200 the only RF test chamber on the market that enables OTA performance and RSE testing of wireless devices such as smartphones right on the lab bench.

LISTED UNDER: Services, Calibration / Test | Chipsets, Other
Advertisement

Further Strengthened Support for Automated MIPI M-PHY Testing

June 12, 2012 11:04 am | Product Releases | Comments

Tektronix, Inc today announced a series of enhancements to its automated MIPI Alliance M-PHY test solutions, offering new multi-lane transmitter test setup enablement and the widest test coverage – automation of approximately 1,000 tests – for this rapidly emerging mobile device standard. To showcase this comprehensive test coverage, Tektronix and ST-Ericsson are providing hands-on demonstrations during the MIPI Alliance All Member Meeting this week in Berlin.

LISTED UNDER: Services, Calibration / Test

Extended C and C++ Embedded Testing Support for MULTI Software

June 5, 2012 6:57 am | Product Releases | Comments

Parasoft Corporation and Green Hills Software announced today that Parasoft C/C++test, the industry's most comprehensive testing solution for C and C++ development, now supports additional Green Hills Software MULTI® environments. The latest release extends C/C++test's integrated testing capabilities to embedded software engineers working with Green Hills MULTI compilers for V800, V850, and Linux x86 native.

LISTED UNDER: Services, Calibration / Test

New Aries CSP Sockets Enable Testing of Any Area-Array Device to +200 Degrees C

April 18, 2012 6:42 am | Product Releases | Comments

High-temp sockets useful in military, aerospace and geophysical applications Aries Electronics, a US manufacturer of standard, programmed and custom interconnection products used worldwide, now offers the industry’s first CSP sockets  that accept any area-array device for high-temperature testing up to +200°C.

LISTED UNDER: Services, Calibration / Test

ESK 300C Kit Enables Easy Test and Development of Energy Harvesting Wireless Solutions

April 10, 2012 11:33 am | Product Releases | Comments

Partnership Kicks Off in North America With Exclusive Launch of ESK 300C Starter Kit Enables OEMs to Easily Test and Develop Energy Harvesting Wireless Solutions To kick off their partnership, EnOcean and Future Energy Solutions (FES) are jointly launching the ESK 300C starter kit in the North American market.

LISTED UNDER: Services, Calibration / Test

Voyantic Launches the Voyantic Reader Test System

April 5, 2012 5:55 am | Product Releases | Comments

Voyantic is launching a new test system for measuring the performance of UHF RFID readers at the RFID Journal Live! 2012 in Orlando. The Voyantic Reader Test System is a tool for evaluating the functionality and performance of UHF RFID Readers. The system enables verifying the transmit power, and determining the sensitivity of readers, both conductively and in the radiated field.

LISTED UNDER: Services, Calibration / Test

ACE MX2 MIMO Channel Emulator and Comprehensive Product Strategy for Real World Test

April 4, 2012 6:07 am | Product Releases | Comments

Azimuth Systems announced the ACE MX2 wireless channel emulator together with its comprehensive strategy for real world test. The ACE MX2 MIMO Channel Emulator, Azimuth’s newest channel emulator, is the first product created in support of the new strategy. In today’s complex wireless environment, with a rapidly growing number of protocols, topologies and frequencies, one size does not fit all.

LISTED UNDER: Services, Calibration / Test

Mu TestCloud Enables Validation of Application-Aware Policies for Intelligent Enterprise Networks

February 29, 2012 8:50 am | Product Releases | Comments

Mu Dynamics Content Store Now Offers More Than 3,000 Application Tests and Security Attacks Using Real-World Traffic Mu Dynamics, the leader in validating and testing applications and application-aware networks, has announced that Mu Dynamics Mu TestCloud, a cloud-based content store, now delivers more than 3,000 ready-to-run tests that can be used to validate application and security policies on intelligent enterprise networks.

LISTED UNDER: Services, Calibration / Test

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading