Advertisement

Testers

July 8, 2003 11:09 am | Product Releases | Comments

QuadTech announces that it has added three Hipot testers to its family of Sentry Hipot Testers. The Sentry Plus Series includes three models. The Sentry 10 Plus performs AS Hipot tests over a programmable voltage range from 50 to 5000 V AC with a pass/fail leakage current detection range from 1 μA to 20 mA....

LISTED UNDER: Services, Calibration / Test

LNA Test Receiver

July 8, 2003 11:09 am | Product Releases | Comments

Spacek Labs receiver model P60-1B is designed for performing noise figure testing of V-Band low-noise amplifiers. The receiver operates over a 10 GHz bandwidth in V-Band with full bandwidth coverage as an option. The LO is derived using a 3X multiplier or with an optional 4X multiplier. The IF covers 10 to 500 MHz....

LISTED UNDER: Services, Calibration / Test

Noise Calibration Standards

July 2, 2003 9:47 am | Product Releases | Comments

Noise Com announces the NBS-Series of broadband Noise Calibration Standards for calibration laboratories, radiometer test and verification, and low noise amplifier tests. Using a low-loss waveguide horn design, Noise Com isolates the cold parts from the waveguide, which is controlled at ambient temperature, and avoids condensation of humidity and errors from temperature gradients....

LISTED UNDER: Services, Calibration / Test | Test and Measurement, Standards / Calibration
Advertisement

The Missing Link: 3G Test Cases for the Deployment of Next-Generation Wireless

May 30, 2003 11:59 am | Product Releases | Comments

By Rob Johnson, Anite Working with TTCN 3G is happening. As the broader market reconciles the overly optimistic expectations of the last several years, the wireless industry is, in fact, proceeding with the launch of next-generation wireless services. The momentum and commitment behind 3G network deployment and terminal development remains strong....

LISTED UNDER: Services, Calibration / Test

Mobile Test Platform

May 30, 2003 11:46 am | Product Releases | Comments

The Seven.Five multigeneration wireless test family is a mobile test platform that is adaptable to any test application. It provides wireless infrastructure analysis, benchmarking, and optimization for 2G, 2.5G, and 3G network deployments. The family consists of Seven.Five Solo, Seven.Five Duo, Seven....

LISTED UNDER: Services, Calibration / Test

Test Solution

May 30, 2003 11:38 am | Product Releases | Comments

The Agilent Signal Studio for 1xEV-DV and cdma200 software (E4438C-414) works with the Agilent E4438C ESG vector signal generator, giving mobile chipset designers a flexible test and verification tool based upon 3GPP2 standards. The software application includes four 1xEV-DV forward link channels: two short-duration, fully coded packet data channels (PDCH) and two real-time packet data control channels (PDCCH), in addition to forward and re...

LISTED UNDER: Services, Calibration / Test

Test and Development Chassis

May 30, 2003 11:38 am | Product Releases | Comments

Tracewell announces a test and development chassis for applications using the CompactPCI Serial Mesh Backplane (CSMB) architecture. This fabric architecture enables high speed, high performance data transfer in a variety of applications. The T-Frame™ test and development system is an 8-slot system providing the functionality and control of a development chassis with fully compliant Serial Mess Backplane, and the added benefit of open ac...

LISTED UNDER: Services, Calibration / Test

Probes and Test Accessories

May 1, 2003 11:25 am | Product Releases | Comments

These fused probes and test accessories are featured in Fused Probe Test Kits, specialized probes, DMM test leads, and individual accessories. High quality fast acting ceramic fuses (or customer specific fuses) rated up to 10 amps are located near probe tips. Design features include flexible double insulated silicone leads resistant to corrosive chemicals and high temperatures....

LISTED UNDER: Services, Calibration / Test
Advertisement

Test Translators

April 29, 2003 7:36 am | Product Releases | Comments

Designed to simulate the satellite link during ground station set-up and alignment, new models of Loop Test Translator feature switchable frequency bands, accommodating multiple transponders or multiple satellites within a single 1U rack unit. A dedicated multiple Ku band unit has the ability to translate a common 13....

LISTED UNDER: Services, Calibration / Test

EDA Tools and Test Instrumentation

April 29, 2003 7:29 am | Product Releases | Comments

Agilent introduces an application note for component designers that discusses the benefits of using existing investments in Agilent ADS software and test instrumentation. "Connected Simulation and Test Solutions Using the Advanced Design System" addresses the benefits of verifying designs earlier in the design process, and discusses how connected EDA tools and Test Instrumentation can increase productivity and lower development cost...

LISTED UNDER: Services, Calibration / Test

Radar Stability Test System

April 29, 2003 7:27 am | Product Releases | Comments

The PN9002 is a pulse-to-pulse radar stability test system. The PN9002 system enables measurements of amplitude and phase stability of radar pulses with a dynamic range. It integrates hardware and software to test a two-ports module for amplitude and phase stability. The PN9002 acts as a "micro-radar" providing pulsed signals to the unit under test and analyzing the received pulses....

LISTED UNDER: Services, Calibration / Test | Radar

Test Cable

April 29, 2003 7:27 am | Product Releases | Comments

The MegaPhase® SuperFlex™ 26.5 GHz test temperature stable cable is phase and amplitude stable with temperature stability of < 7 ppm per °C from – 40° to +125°C. Operating temperature range is – 70° to +121°C. The phase and amplitude change versus flexure, measured for a 360° wrap around a 4....

LISTED UNDER: Interconnect, Cables | Services, Calibration / Test

Laser Diode Test System

April 29, 2003 7:27 am | Product Releases | Comments

In the System 25, Keithley combines their light-current-voltage (LIV) measuring instruments with unique accessories and cables, and supplies the complete package for less than individual components. System 25 allows customers to choose only the features and performance they need. System 25 provides up to 5 A laser drive current, precision voltage measurements, two channels of photodetection, selectable photodiode detector types, optional la...

LISTED UNDER: Services, Calibration / Test

Test Instrument for SatCom

April 29, 2003 7:27 am | Product Releases | Comments

Micronetics' CNG-SatCom includes constant noise output. This feature allows the user to set and maintain a desired level of noise while varying the carrier signal. The internal power meter is used to measure the noise and carrier levels and to maintain accurate SNR that are set by the user. A Master/Slave attenuation design allows the modem to maintain a lock on the carrier signal while establishing new carrier to noise ratios....

LISTED UNDER: Services, Calibration / Test

Handheld Test Set

March 28, 2003 3:52 am | Product Releases | Comments

The IFR 4000 is a navigation communications ramp test set. IFR 4000 is a self-contained, handheld unit designed for ramp testing, but can also be used in bench test applications. It performs functional testing, signal generation and calibration of Marker Beacon (MKR), VHF Omnidirectional Radio Range (VOR, Instrument Landing System (ILS) and VHF/UHF Communications (COMM) avionics systems....

LISTED UNDER: Services, Calibration / Test

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading