Advertisement

Drive Test Equipment

November 3, 2003 6:54 am | Product Releases | Comments

ZK Celltest has added PN Scanning as an optional feature on its DXM line of test equipment. PN scanning detects and logs all desirable and undesirable (interfering) PN signals impacting working subscriber phones in a CDMA network. Undesirable PN signals at levels close to the Active Sets result in Pilot Pollution that is interference, which causes poor audio quality and high FER....

LISTED UNDER: Services, Calibration / Test

Cable Tester

November 3, 2003 6:54 am | Product Releases | Comments

The Fault Mapper Pro™ model CA7026 is a handheld graphical Time Domain Reflectometer (TDR) designed for identifying and locating faults on power and communication cables. Model CA7026 measures cable length and indicates the distance to cable faults and terminations, to a range of 11700 ft. The electroluminescent backlit display shows a reflection profile of the cable under test as an oscilloscope-like trace....

LISTED UNDER: Interconnect, Cables | Services, Calibration / Test

Design and Test Environments Combine

October 28, 2003 11:04 am | Product Releases | Comments

Device characterization and system simulation is possible when design and test environments are combined. Ansoft Corporation Complex communication standards and new materials pose numerous benefits and challenges for today's RF circuit designers looking to outperform the current generation of products....

LISTED UNDER: Services, Calibration / Test
Advertisement

Parametric Tester

October 28, 2003 10:16 am | Product Releases | Comments

Keithley introduces the S630DC/RF parametric testers with 40 GHz RF measurement capabilities. RF connections are designed into the test head and use per-pin electronics to achieve precision and reliability. The system incorporates a vector network analyzer and DC/RF probe card technology. The inherent DC resolution is 100 aA and 100 nV....

LISTED UNDER: Services, Calibration / Test

Testing Technology

October 28, 2003 10:16 am | Product Releases | Comments

ASSET introduces TopCAT (Topology and Cluster Analysis Technology). TopCAT analyzes the chematic of a Printed circuit board to identigy all of the non-boundary can devices that are connected to boundary scan devices. TopCAT automatically matches the names of the non-boundary scan devices in the design's netlist with device models archived on ASSET's web site or stored in a model library of the user....

LISTED UNDER: Services, Calibration / Test

UMTS Radio Tester

October 1, 2003 6:12 am | Product Releases | Comments

The CMU300 is a UMTS radio tester that allows function-reliable installation of the UMTS network. The CMU300 provides transmitter and receiver measurements in one instrument. During the installation phase, the CMU300 serves as a UMTS conformance tester for all components used. www.rohde-schwarz....

LISTED UNDER: Services, Calibration / Test

EMC Test System

October 1, 2003 6:12 am | Product Releases | Comments

Schaffner introduces a modular system for conducted EMC immunity testing. The Modula EMC test system standard functions include the generation of classic interference pulses such as burst and surge, as well as power quality simulations. The system has a wireless remote control capability that enables users to operate the system from a standing or sitting position....

LISTED UNDER: Services, Calibration / Test

Electrical Safety Tester

October 1, 2003 6:12 am | Product Releases | Comments

All functions on the the Guardian 1030S, including the internal 8 channel scanner, can be programmed via front panel or remotely via RS-232. The Guardian 1030S can perform AC Hipot tests over a programmable voltage range from 50 to 5000 V, with leakage current detection from 1 μA to 30 mA; DC Hipot tests over a programmable voltage range from 50 to 6000 V, with leakage current detection from 0....

LISTED UNDER: Services, Calibration / Test
Advertisement

Test Platform

October 1, 2003 6:12 am | Product Releases | Comments

Tektronix' K15 protocol test platform provides 3G troubleshooting solutions that include application software for real-time multi-interface call trace and automatic lub configuration for UMTS....

LISTED UNDER: Services, Calibration / Test

PXI-based Test Systems

October 1, 2003 6:05 am | Product Releases | Comments

The Aeroflex 3000 series is a PXI-based modular test suite for mobile phone and general-purpose wireless test. The Aeroflex 3000 series includes four PXI modules and supporting applications for signal generation and signal analysis that meet the specific requirements for GSM/EDGE and WCDMA/UMTS mobile phone testing....

LISTED UNDER: Services, Calibration / Test

MATLAB Test and Measurement Applications for Communications

September 18, 2003 9:37 am | Product Releases | Comments

This seminar will cover the design of a communications subsystem using MATLAB(R) and Simulink(R), implementation on an FPGA, and subsystem testing and verification by taking real world measurements and comparing modeled behavior with actual behavior. Engineers from The MathWorks will demonstrate tools that support the communications and electronics design flow, including prototyping designs, modeling system behavior, design verification...

LISTED UNDER: Services, Calibration / Test

10th Annual International KGD Packaging and Test Workshop

September 18, 2003 9:31 am | Product Releases | Comments

The International KGD Packaging and Test Workshop returns to the Napa Valley this September to build on the progress of the past 10 years and focus on the future of semiconductor die products (bare die, flip chip, and wafer level-CSP). As the microelectronics industry's leading event focusing on KGD packaging, the workshop has charted a decade of progress, from the early emphasis on high performance systems to the current success of lo...

LISTED UNDER: Services, Calibration / Test

Automotive Component Testing

September 2, 2003 8:37 am | Product Releases | Comments

Schaffner has published a wall cart that covers key elements of automotive component testing. The cart includes a variety of diagrams, tables, and ratio charts for RF emissions, direct RF power injection, Bulk Current Injection (BCI), ESD and transients, as well as TEM cell and stripline testing....

LISTED UNDER: Automotive | Automotive | Services, Calibration / Test

On-Wafer Test Solution

July 30, 2003 9:51 am | Product Releases | Comments

Cascade Microtech announces a fully integrated on-wafer device characterization solution that provides measurement accuracy and high performance for characterizing semiconductor devices to 110 GHz. This solution enables high-precision measurements up to 110 GHz by combining the Agilent N5250A 110 GHz PNA series network analyzer with Cascade's Summit series of analytical probing systems....

LISTED UNDER: Services, Calibration / Test

Testing Platforms

July 8, 2003 11:09 am | Product Releases | Comments

Racal Instruments has developed quad band functionality within its 6103G digital radio test platform, providing 850, 900, 1800, and 1900 MHz test capability. This will enable users of the 6103 AIME and 6103 AIME/CT to cover all GSM bands using one test platform. Racal has also developed 850 MHz protocol conformance test cases bringing users of the 6103 AIME/CT system quad band conformance testing capabilities....

LISTED UNDER: Services, Calibration / Test

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading