Advertisement

COLFET Low-Noise Calibration Source

February 2, 2004 8:06 am | Product Releases | Comments

Spacek Labs Model CS-K Low-Noise COLFET Calibration Source offers a new way to calibrate K-band radiometers. Instead of a liquid nitrogen-cooled load, a small waveguide-output source (K-connector optional) radiates 33-60 K over 20-24 GHz when biased by +8 VDC, 100 mA max. The CS-K operates at room temperature so no cooling is required....

LISTED UNDER: Services, Calibration / Test | Test and Measurement, Standards / Calibration
Advertisement

Test Equipment with HSDPA Capabilities

February 2, 2004 8:04 am | Product Releases | Comments

Agilent introduces high-speed downlink packet access (HSDPA) capabilities for its high-performance E4438C vector signal generator, PSA Series spectrum analyzers, and E4406A vector signal analyzer. These powerful tools give design engineers the ability to design, debug and evaluate the performance of their 3G and 3....

LISTED UNDER: Services, Calibration / Test

Design Test System

January 21, 2004 11:49 am | Product Releases | Comments

Computer Access Technology Corporation (CATC) announces the Version 2.2 software for the BT Tracer/Trainer , CATC's Bluetooth design and verification test system. With this release, the BT Tracer/Trainer is compliant with the Bluetooth V1.2 specification. In addition, this release allows for the creation of a second, completely independent recording channel, includes a Profiles Decode toolbar for easier protocol selection and debug, and ex...

LISTED UNDER: Services, Calibration / Test

Automated Testing

January 21, 2004 10:48 am | Product Releases | Comments

Spirent announces the release of a single-source solution for automated testing of GSM and WCDMA handsets that support Assisted GPS (A-GPS) location technology. Spirent's ULTS product is fully integrated and enables comprehensive A-GPS performance analysis of GSM/GPRS mobile devices in the lab. With Roadmap WCDMA support the product will enable full A-GPS performance analysis of UMTS terminals....

LISTED UNDER: Services, Calibration / Test

Test System

January 21, 2004 10:48 am | Product Releases | Comments

Keithlye introduces Model 2790-A SourceMeter Airbag Inflator DC electrical test system. The SourceMeter instruments combine sourcing, measurement, and signal routing capabilities required for insulation resistance and conductor (bridgewire) continuity testing in one package. The Model 2790-A cover a span of 1 MΩ to 10 GΩ....

LISTED UNDER: Services, Calibration / Test

Pull Test Instrument

January 21, 2004 10:48 am | Product Releases | Comments

MiTel introduces their portable tensile strength pull tester used to certify the quality of crimp-on solderless lug, ring, funnel barrel, tongue and spade terminals to wire. The MPT-500 instrument is a portable tool using a handheld ratchet-action tester to make destructive pull type force measurements to crimp-on terminals terminated to wire, exerting up to 200 pounds of force....

LISTED UNDER: Services, Calibration / Test

Andrew Corporation Expands Wireless Training Course

January 14, 2004 6:04 am | Product Releases | Comments

Andrew Corporation announces the expansion of the Andrew Institute's® Fundamentals of VSWR training course to include practical demonstrations of RF line-sweeping using Anritsu Company's industry-leading Site Master™ cable and antenna analyzers. Site Master is widely used by wireless network professionals to quickly and accurately evaluate the health and status of installed transmission lines and antenna systems, as well as exped...

LISTED UNDER: Services, Education / Training

Test Adapters

November 24, 2003 7:39 am | Product Releases | Comments

Connectronics introduces a line of "Quick Release" test adapters. These adapters incorporate push-on mating with integrated locking mechanism to prevent mated surfaces from separating due to cable weight and handling. The locking out contacts are heat-treated beryllium copper and the quick-release sleeves are passivated stainless steel for strength and durability to handle multiple matings.

LISTED UNDER: Interconnect, Adapters | Services, Calibration / Test

Application Notes for Test Equipment

November 24, 2003 7:30 am | Product Releases | Comments

QuadTech introduces five collections of archived application notes. These collections are a compilation of application notes that provide resources for test engineers, quality engineers, test equipment operators, and those involved with the development and manufacturing of electronic products. The EST collection details how and why the most common electrical safety tests should be performed, testing terminology, discussion of procedures, op...

LISTED UNDER: Services, Calibration / Test

Bluetooth Tester

November 24, 2003 7:19 am | Product Releases | Comments

The Agilent N4010A wireless connectivity test set includes an option (Option 101) that speeds measurements and improves accuracy for high-volume manufacturing of products that incorporate Bluetooth technology. By adding I/O connectivity (Option 110), the test set will work with the Agilent 89601 vector signal analysis software and 89607 WLAN test suite software....

LISTED UNDER: Services, Calibration / Test

Calibration Module

November 24, 2003 7:19 am | Product Releases | Comments

Anritsu introduces the MN4765A optical to electrical (O/E) calibration module that transforms its Lightning 37200C/37300C vector network analyzers (VNAs) into lightwave component analyzers. A characterized, unamplified photodiode module, the MN4765A acts as an optical receiver when used with the 37200C/37300C series VNAs, which have frequency coverage up to 65 GHz....

LISTED UNDER: Services, Calibration / Test | Test and Measurement, Standards / Calibration

Test Fixture Boards

November 24, 2003 7:19 am | Product Releases | Comments

Advanced Interconnections offers custom engineered, microchip socketed test fixture boards that electrically interface test equipment to ball grid array (BGA) packages. The test fixture boards are multilayer FR-4 assemblies incorporating cable-to-board connectors (which provide the interface to the test system) and AIC's True BGA Socket (into which the chip packages are inserted during testing)....

LISTED UNDER: Boards & Modules | Services, Calibration / Test

Test Receiver

November 24, 2003 7:19 am | Product Releases | Comments

Berkeley introduces Yellowjacket Plus, an 802.11a Wi-Fi analysis tool with built-in GPS receiver. Yellowjacket Plus is an all-in-one, portable, wireless test receiver system with built-in spectrum analyzer that sweeps, analyzes, optimizes and secures 5 GHz Wi-Fi WISPs and Hotspots. The calibrated receiver measures all 8 OFDM 802....

LISTED UNDER: Services, Calibration / Test

Test Socket

November 24, 2003 7:19 am | Product Releases | Comments

Aries introduces a high frequency test socket for devices from 14 to 27 mm 2 wide. The socket is suited for manual testing of devices with pitches down to 0.50 mm, in applications with speeds from 1 GHz to over 10 GHz. A 4-point spring probe crown on the socket ensures scrub on solder ball oxides for reliable contact mating....

LISTED UNDER: Services, Calibration / Test

Cables for Test and Measurement

November 24, 2003 7:19 am | Product Releases | Comments

Semflex introduces the RH cable series. Designed for cable assemblies that support test and measurement instruments, this cable delivers improved phase stability versus flexure and temperature. Low attenuation is achieved through use of silver plated inner and outer conductors, and low density microporous PTFE dielectrics and FEP jackets provide consistent performance over wide temperature extremes....

LISTED UNDER: Interconnect, Cables | Services, Calibration / Test

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading