Advertisement

MIL-STD-1553 Test and Simulation Tool Includes Amplitude Range of 0V to 20.5V

November 21, 2012 7:05 am | Product Releases | Comments

Data Device Corporation (DDC) adds variable voltage programmability to the BU-67210F/I/T one to four channel MIL-STD-1553 AceXtreme PMC, PCI, and cPCI/PXI Card family to create a feature-rich and highly dynamic test, simulation, and verification tool. Each MIL-STD-1553 channel can be independently programmed for transmitter amplitudes ranging from 0V to 20.

LISTED UNDER: Services, Calibration / Test
Advertisement

Modular UE Manufacturing Tester Supports Cellular and Connectivity Standards

October 17, 2012 5:43 am | Product Releases | Comments

Anritsu Company introduces the MT8870A Universal Wireless Test Set with manufacturing test capability for up to eight User Equipment (UE) devices in a single mainframe without the need for external switching. The tester’s basic module includes an integrated Vector Signal Analyzer (VSA), Vector Signal Generator (VSG), and multi-core processor, and users can configure a mainframe with up to four modules with four VSAs and four VSGs, depending on test requirements.

LISTED UNDER: Services, Calibration / Test

LTE Advanced Carrier Aggregation Software For MD8430A LTE Signaling Tester

September 21, 2012 7:03 am | Product Releases | Comments

Anritsu Company announces the industry’s first call-based LTE Advanced Carrier Aggregation testing capability that can be integrated into its MD8430A LTE Signaling Tester. The software-only upgrade leverages the four available RFs in the MD8430A, and provides 300 MB/s downlink throughput using two 2x2 MIMO Component Carriers (CCs).

LISTED UNDER: Services, Calibration / Test

New Amplifiers for Wireless Testing

September 20, 2012 6:53 am | Wireless Design & Development | Product Releases | Comments

MILMEGA, now a part of Teseq, offers a new amplifier product range designed to meet test requirements within wireless testing frequency bands .  The AS0728 family of amplifiers has a frequency range of 700 MHz to 2.8 GHz.  Available in 25 W, 50 W, 100 W and 170 W P1 dB power levels, these new amplifiers are ideal in the wireless communications industry where high reliability, excellent linearity, power density and leading performance are required.

LISTED UNDER: Services, Calibration / Test | Amplifiers, Other

Compact 7700 Integrated Microwave Test System

September 12, 2012 6:31 am | Wireless Design & Development | Product Releases | Comments

Aeroflex Incoporated announced the availability of the 7700 integrated microwave test system. The 7700 is the market’s most complete turnkey ATE (Automated Test Equipment) system-in-a-box designed for rapid production testing of microwave and RF components and modules. The 7700 is a bench-sized instrument that utilizes Aeroflex’s synthetic architecture and Common Platform hardware to achieve fast measurement throughput.

LISTED UNDER: Services, Calibration / Test | Amplifiers, Other

QSFP+ Active Optical Cable Assemblies Pass Infiniband Compliance Testing

September 4, 2012 7:29 am | Product Releases | Comments

FCI has developed a QSFP+ based (quad small form-factor pluggable) active optical cable assembly that meets Infiniband® Compliance Testing requirements. The XLerate™ High Speed I/O active optical cable assembly is fully compliant to the Infiniband FDR (Fourteen Data Rate - 14 Gb/s per channel) specification, and is now on the Infiniband Trade Association (IBTA) Integrator’s List.

LISTED UNDER: Interconnect, Cables | Services, Calibration / Test

Software Simplifies Planning, Design and Installation of Cable and Pipe Transits

August 27, 2012 11:33 am | Wireless Design & Development | Product Releases | Comments

Designing transits with CAD programs can be time consuming.  Roxtec Transit Manager Software (RTM) 3.0 allows electrical engineers to reduce design time and cost through auto-planning.  An engineer can easily enter cables manually or import project data from external cable schedules to generate automatic packing plans, and then simply print material lists for purchase.

LISTED UNDER: Interconnect, Cables | Services, Consulting

Test Solutions for 802.11ac WLAN and Bluetooth Low-Energy Technology

August 27, 2012 8:09 am | Product Releases | Comments

National Instruments introduced test solutions for 802.11ac WLAN and Bluetooth low-energy technology that combine NI graphical system design software and modular, FPGA-based PXI instrumentation to provide high-performance test capabilities that are completely user-programmable. These test solutions along with other cellular, navigation and wireless connectivity solutions from NI, help engineers thoroughly test their devices on a single high-performance platform.

LISTED UNDER: Services, Calibration / Test

Power Amplifiers for RF Conducted Immunity Testing

August 27, 2012 5:58 am | Wireless Design & Development | Product Releases | Comments

Com-Power is excited to announce a new line of RF power amplifiers for IEC 61000-4-6 conducted immunity testing up 250 to MHz. Three models are available with 25, 50 and 100 Watts power output. Com-Power also has comprehensive line of Coupling decoupling networks (CDN) required to test for these standard.

LISTED UNDER: Services, Calibration / Test | Amplifiers, Other

Full Portfolio of LTE Device Test Solutions Supports Public Safety Community

August 24, 2012 7:26 am | Product Releases | Comments

Anritsu Company announces that its full portfolio of LTE device test solutions includes Band 14 capability to support the public safety community. This portfolio includes three LTE-capable test platforms, as well as two LTE-focused test systems. Applications for these solutions cover the complete LTE device development chain from functional test to PTCRB certification and aftermarket repair, and options for advanced functionality, such as Voice over LTE (VoLTE) and LTE Advanced/Carrier Aggregation, are available.

LISTED UNDER: Services, Calibration / Test

3550 Digital Radio Test System with Color Touch-Screen

August 21, 2012 6:59 am | Product Releases | Comments

Aeroflex announced the 3550 Digital Radio Test System featuring an industry-first color touch-screen and enhanced specifications to provide users with a lightweight, easy to use, and reliable digital radio test system. Designed for Professional Mobile Radio (PMR), public safety, and other land mobile radio applications, the Aeroflex 3550 test system quickly isolates problems and assesses performance in AM/FM radios, with options for P25, DMR, NXDN™, and dPMR radio systems.

LISTED UNDER: Services, Calibration / Test

New 3-Phase Burst Pulse CDN for EFT Testing

August 13, 2012 6:50 am | Product Releases | Comments

Teseq now offers a 200 A 3-phase burst pulse coupling/decoupling network (CDN) for electrical fast transient (EFT) and burst testing.  The new CDN 3083-B200 easily handles high inrush currents and pulse-shaped peak currents, making it ideal for testing high current and high power equipment in large machines, appliances and smart grid applications.

LISTED UNDER: Services, Calibration / Test

New emcware for Automated EMC Testing

August 9, 2012 7:37 am | Product Releases | Comments

emcware by AR RF/Microwave Instrumentation provides automated Electromagnetic Compatibility (EMC) testing and report generation . It makes testing quick, easy, and extremely accurate, and it’s ideal for all types of users from corporate to professional test laboratories . This user-friendly software package features conducted immunity, radiated susceptibility and emissions tests .

LISTED UNDER: Services, Calibration / Test

New Module Triples EMC Testing Range to 18 GHz in Digital Receiver

August 9, 2012 7:20 am | Product Releases | Comments

Teseq Inc. now offers a high-performance digital EMC/EMI receiver module that extends the frequency range of the PMM 9010 receiver system from 6 GHz to 18 GHz.  Ideal for use in commercial test labs and by in-house manufacturers’ labs, the upgraded PMM system can now be used for a wider range of EMC testing.

LISTED UNDER: Services, Calibration / Test

Receiver Enhances Compliance Testing through Input Sensitivity

August 8, 2012 6:49 am | Wireless Design & Development | Product Releases | Comments

Agilent Technologies Inc. announced the introduction of the N9038A MXE EMI receiver , which is designed for laboratories that perform compliance testing of electrical and electronic products. The MXE enhances electromagnetic interference (EMI) measurement accuracy and repeatability with a displayed average noise level (DANL) of -163 dBm at 1 GHz.

LISTED UNDER: Services, Calibration / Test | Receivers, Other

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading