Advertisement

Complete Test Bench for DDR 3 Memory Design Debug & Validation

June 16, 2009 12:26 pm | Product Releases | Comments

Tektronix, Inc. introduces the 3rd generation of its proven DDR analysis software (opt. DDRA) for the DPO/DSA70000B Series and DPO7000 Series Oscilloscopes. The Tektronix DDR test solution supports all speeds of DDR, DDR 2, DDR 3, LP-DDR and GDDR3 and spans both PHY layer and digital domains....

LISTED UNDER: Services, Calibration / Test

Upconverter Supports Transceiver Test, Simplifies Test System Design

June 11, 2009 6:19 am | Wireless Design & Development | Product Releases | Comments

Keithley Instruments, Inc. introduces the Model 2891-IQ Upconverter, which provides comprehensive support for transceiver testing by processing analog I and Q baseband signals for testing a transceiver’s transmitter, as well as processing analog I and Q output signals for testing a transceiver’s receiver....

LISTED UNDER: Services, Calibration / Test | Chipsets, Other

Agilent Technologies Expands Flexible PNA-X Network Analyzer for Active Device Test

June 9, 2009 12:36 pm | Product Releases | Comments

Agilent Technologies Inc. has expanded the company’s PNA-X network analyzer with 13.5, 43.5 and 50 GHz models. The 43.5 and 50 GHz models support higher frequency applications such as radar and satellite communications, while the 13.5 GHz model is appropriate for lower-frequency devices used in wireless communications....

LISTED UNDER: Services, Calibration / Test | Test and Measurement, Analyzers, Spectrum
Advertisement

Companies Combine Efforts to Deliver Optimized WiMAX/GSM-EDGE RF Calibration for Mass Production

June 3, 2009 6:14 am | Product Releases | Comments

Comsys Communication & Signal Processing Ltd and Rohde & Schwarz have announced that they have jointly developed a customized test solution for RF calibration offering customers the most cost-effective test solution for RF testing, calibration and signal testing in devices incorporating Comsys Mobile's ComMAX™ CM1125 mobile WiMAX/GSM-EDGE modules....

LISTED UNDER: Services, Calibration / Test | Test and Measurement, Standards / Calibration

License-free Digital Education Packages Available for the First Time

May 28, 2009 10:21 am | by Edited the www.wirelessdesignmag.com staff | Product Releases | Comments

AUBURN HILLS, Mich., /PRNewswire/ -- For the first time schools can enjoy unlimited usage of their favorite software and games. Teacher's Discovery Interactive has introduced License-free Digital Education Packages that eliminate the costly and cumbersome, inconsistent licensing rules schools face....

LISTED UNDER: Services, Education / Training

Comprehensive Climate and Energy Bill Advances the Future of Green Energy Sector

May 26, 2009 8:12 am | Wireless Design & Development | Product Releases | Comments

WASHINGTON, /PRNewswire/ -- The Coalition for Green Bank applauded the House Energy and Commerce Committee's passage of its sweeping legislation that would overhaul U.S. energy and global warming policy. The American Clean Energy and Security Act (H.R. 2454) would also create a Clean Energy Deployment Administration within the Energy Department....

LISTED UNDER: Services, Consulting

Wireless Channel Emulator Brings the Real World into the Wireless Test Lab

May 26, 2009 6:59 am | Product Releases | Comments

Spirent Communications plc has annouces Virtual Drive Test and Fading Lab functionality is now available on Spirent's SR5500 Wireless Channel Emulator. Virtual Drive Test allows rapid re-creation of RF conditions to bring real-world field testing of mobile devices into the lab. Fading Lab enables the creation or replay of highly-detailed, advanced radio environments from a wide range of data sources.

LISTED UNDER: Services, Calibration / Test

Sensor Simulator Accepts Test Signals from a Voltage Function Generator

May 26, 2009 6:59 am | Product Releases | Comments

PCB Piezotronics introduces Model 401B04 ICP® sensor simulator, which installs in place of an ICP® sensor and accepts test signals from a voltage function generator. This model allows test engineers to make sure the entire measuring chain consisting of cable, ICP® or IEPE signal conditioning, and data acquisition system is set up properly and ready to take measurements; which is especially important when the cost of running a test is very expensive.

LISTED UNDER: Services, Calibration / Test | Test and Measurement, Function Generators
Advertisement

Portable Test Cell Offers Fast and Convenient Wireless Testing

April 8, 2009 6:49 am | Product Releases | Comments

ETS-Lindgren introduces a portable RF shielded test cell, Model 5247, for making wireless device design verification and over-the-air performance measurements. At 35.5"(L) x 35.5"(W) x 84"(H) with rolling casters, the test cell can be easily moved between locations for design verification, pre-certification, and production line measurement applications.

LISTED UNDER: Services, Calibration / Test

The Basics of RF and Microwave Switching Test Systems

March 25, 2009 5:52 am | Product Releases | Comments

Understanding the key components of an RF and microwave switching test system will ensure overall signal and system integrity. By Dale Cigoy, Keithley Instruments, Inc. click to enlarge Figure 1. High-frequency electromechanical relay....

LISTED UNDER: Services, Calibration / Test

Test Solution for Next-Generation PHS

March 9, 2009 6:39 am | Product Releases | Comments

Anritsu Company introduces test solutions that support next-generation PHS (XGP: eXtended Global Platform) to help ensure the successful rollout of XGP in the marketplace. Three software packages have been developed for use with Anritsu’s MS269xA Signal Analyzers and MG3700A Vector Signal Generator to offer designers and manufacturers of XGP mobile devices, base stations, and devices a test solution to ensure the performance of their produc...

LISTED UNDER: Services, Calibration / Test

New Features for 7100 LTE Handset Tester as LTE Goes Global

March 9, 2009 6:33 am | Product Releases | Comments

With LTE (3G Long Term Evolution) fast becoming a global phenomenon, Aeroflex has announced that it plans to dramatically accelerate the roll out of the major new features planned for 2009 for its recently launched Aeroflex 7100 Digital Radio Test Set for LTE mobile device test. The accelerated roll out of new features for the Aeroflex 7100 during 2009 relates to LTE/CDMA2000 inter-working, LTE/UTRAN & GERAN handover, TD-LTE mode and LTE mo...

LISTED UNDER: Services, Calibration / Test

16-Channel VPX SerDes Test Module Serves VPX Systems

March 6, 2009 6:56 am | Product Releases | Comments

Elma Bustronic announces a 16-channel version of its SerDes test modules for VPX systems. The modules allow testing and pre-emphasis of the SerDes signals to ensure signal performance of the system. The 16-channel SerDes modules are designed to plug into VPX backplanes and directly test the channel compliance....

LISTED UNDER: Services, Calibration / Test

Validation Software Automates Compliance Testing

March 6, 2009 6:56 am | Product Releases | Comments

Agilent Technologies, Inc. announces its automated U7239A WiMedia-based multiband orthogonal frequency domain modulation (MB-OFDM) ultra-wideband (UWB) validation software that provides verification that MB-OFDM designs perform to the parameters defined by the WiMedia UWB PHY 1.2 test specification....

LISTED UNDER: Services, Calibration / Test

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading