Anritsu Company Introduces Additional Capabilities for the 8 HSPA Evolution Test Solution

June 28, 2010 11:36 am | Wireless Design & Development | Product Releases | Comments

Anritsu Company introduces additional Release 8 HSPA Evolution software for its MD8480C Signaling Tester that builds on existing Dual Carrier downlink capability to create a more comprehensive Release 8 HSPA Evolution test solution. The new software includes features for testing Uplink Continuous Packet Connectivity (CPC), including Improved Layer 2 and Enhanced Cell FACH support, and provides developers of 3GPP protocol stacks, chipsets, a...

LISTED UNDER: Services, Calibration / Test | Chipsets, Other

Low Phase Noise VCO is Well Suited for Fixed Wireless and Test and Measurement

June 25, 2010 9:16 am | Product Releases | Comments

Z-Communications, Inc. announces a new RoHS compliant VCO (Voltage-Controlled Oscillator) Model CRO3000B-LF. The CRO3000B-LF operates at 3000 MHz with a tuning voltage range of 0.5 to 4.5 Vdc. This VCO features a typical phase noise of -115 dBc/Hz @ 10 kHz offset and a typical tuning sensitivity of 11 MHz/V....

LISTED UNDER: Services, Calibration / Test

Precise Sourcing and Measurement Necessary for Advanced Battery Drain Analysis and Functional Test

June 22, 2010 9:32 am | Product Releases | Comments

Agilent Technologies Inc. announces the addition of two source measure units (SMUs) to its N6700 Series Modular Power Systems -- the N6781A 2-quadrant source measure unit for battery drain analysis and the N6782A 2-quadrant source measure unit for functional test. The new SMUs offer advanced sourcing and measurement capabilities required for the testing challenges associated with battery-powered devices and their components....

LISTED UNDER: Power, Batteries | Power, Battery | Services, Calibration / Test

AT4 Wireless Announces the Availability of NFC Forum Test Cases on its RIDER NFC Test Solution

June 21, 2010 10:34 am | Product Releases | Comments

AT4 has released test cases that will allow NFC manufacturers to debug and pretest their NFC implementations prior to the beginning of the Official Certification later this year. After being selected to partner with the NFC Forum for the implementation of the NFC Forum Digital Protocol test cases in its RIDER NFC test solution, AT4 wireless has been working during the last months to achieve the important goal of having a first package of...

LISTED UNDER: Services, Calibration / Test

RMS Power Detectors Support Cellular, LTE/ WiMAX/4G, Test Equipment & Military Applications to 5.8 GHz

June 21, 2010 5:27 am | Product Releases | Comments

Hittite Microwave Corporation has launched two low cost, highly flexible RMS Power Detectors for RF power measurement/control in Cellular/3G, LTE/WiMAX/4G, broadband, test equipment and military applications between DC and 5.8 GHz. The HMC1010LP4E offers 60 dB dynamic range over DC to 3.9 GHz. The HMC909LP4E offers a broadband single-ended RF input with 40 dB dynamic range over DC to 5.

LISTED UNDER: Military-Aerospace | Services, Calibration / Test

Aeroflex Launches Single-box Multi-RAT Tester for Multi-mode eHRPD/LTE Handsets

June 18, 2010 9:12 am | Wireless Design & Development | Product Releases | Comments

Aeroflex announces the launch of a new option for the 7100 LTE Digital Radio Test Set that supports CDMA-based data standards such as Evolution-Data Optimized (EV-DO) and evolved High Rate Packet Data (eHRPD) as well as LTE-eHRPD hand-over. As CDMA network operators migrate towards LTE, the devices used by their subscribers will need to operate with both the legacy EV-DO sectors of the network and those that have been upgraded to LTE, a...

LISTED UNDER: Services, Calibration / Test | Chipsets, Other

Cambridge Consultants and Qualcomm Develop Mobile Health Technology Platform

June 18, 2010 7:42 am | Product Releases | Comments

Cambridge Consultants announces a new platform for enabling wireless connectivity from a medical device to online health services, compliant to the Continua Health Alliance standard. The new, low-cost platform is a combination of Qualcomm Incorporated's Wearable Mobile Device cellular module and Cambridge Consultants' Vena software stack....

LISTED UNDER: Services, Consulting

One-Box Tester to Support Transmit and Receive Testing of LTE Devices Using Signaling

June 15, 2010 6:33 am | Product Releases | Comments

Anritsu Company introduces hardware and software for its MT8820C that extend the capability of the tester to support measurement of parametric data during an LTE test mode call. Capable of conducting TS36.521-1-compliant transmit and receive tests, the enhanced MT8820C can now serve as an Enhanced Node B (eNode B) signaling simulator, adding to current capability for non-signaling test....

LISTED UNDER: Services, Calibration / Test

Test Solution Addresses the Rapidly-Growing Demand for Validating Wi-Fi Positioning Performance of Mobile Devices

June 9, 2010 7:51 am | Wireless Design & Development | Product Releases | Comments

SUNNYVALE, Calif.--(BUSINESS WIRE)--The rapidly-growing demand for ubiquitous location-based applications is driving the use of Wi-Fi positioning, in addition to existing location technologies such as A-GPS and Cell ID, to provide subscribers with location information more quickly and in more places....

LISTED UNDER: Services, Calibration / Test | Chipsets, Other

Chipset Software Supports picoChip Femtocell Test

June 9, 2010 7:51 am | Product Releases | Comments

Agilent Technologies Inc. and picoChip announce a high-volume manufacturing test solution for 3G femtocell products. The jointly developed solution is based on picoChip’s picoXcell semiconductors and software, and Agilent’s N7310A chipset software. The new integrated manufacturing test solution delivers rapid calibration and verification testing capabilities for original design manufacturers (ODMs) and contract manufacturers (CMs)....

LISTED UNDER: Services, Calibration / Test

Scientists Leverage Experimental MATLAB Resource

June 4, 2010 8:00 am | Wireless Design & Development | Product Releases | Comments

ITHACA, N.Y. -- The number of users of the NSF-funded “MATLAB on the TeraGrid” experimental computing resource has been steadily increasing since it went into production at SC09. The Cornell University Center for Advanced Computing and Purdue University team have been working closely with these users to continually improve the software interface from the user’s MATLAB client machines to the cluster and to support Science Gateway access....

LISTED UNDER: Services, Consulting

Microwave Office Software Dramatically Cuts Simulation Times of Multitest’s High-Performance IC Test Boards

June 4, 2010 8:00 am | Product Releases | Comments

Multitest, one of the world’s leading manufacturers of test equipment for semiconductors integrated circuits, provides its clients with highly innovative test handling solutions, custom-tailored to fit individual needs and requirements. Because high throughput rate and accuracy are critical, Multitest uses AWR’s Microwave Office with ACE™ (automated circuit extraction) to simulate and optimize its PCB designs simply, accurately, and eff...

LISTED UNDER: Boards & Modules | Services, Calibration / Test

Ultra-Low Phase Noise Drives Performance Improvements for Phase Noise Test Sets, Signal Generators and Spectrum Analyzers

June 2, 2010 10:11 am | Product Releases | Comments

Vectron International recently announced its OX-045, an Ultra Low Noise (ULN) oven-controlled crystal oscillator (OCXO). The OX-045 is the inaugural product offering with Vectron’s unique ULN crystal and circuitry technology. The OX-045 improves Vectron’s existing low-noise products by lowering the close-in phase noise by 10 dBc/Hz, allowing customers to improve the performance of their top of the line test equipment....

LISTED UNDER: Services, Calibration / Test | Test and Measurement, Analyzers, Spectrum | Test and Measurement, Signal Generators

Low Pass Filters Designed for Test Equipment and General Lab Use

June 1, 2010 11:39 am | Product Releases | Comments

Crystek has introduced a new line Low Pass Filters, the CLPFL Series. Encased in a rugged SMA housing, this filter line is designed for test equipment and general lab use. Five models, with frequency ranges from DC to 100 through 500 MHz, compose the CLPFL line. The Crystek CLPFL Low Pass Filter line has excellent out-of-band rejection, and features 7th Order Butterworth Response and 50 ohm SMA connectors....

LISTED UNDER: Services, Calibration / Test | Filters, IC


You may login with either your assigned username or your e-mail address.
The password field is case sensitive.