National Instruments to Add LTE Automated Test Capabilities to PXI RF Test Portfolio

October 13, 2010 8:10 am | Wireless Design & Development | Product Releases | Comments

National Instruments announced that it will be adding Long Term Evolution (LTE) test capabilities to its RF test product portfolio with the forthcoming NI LTE Measurement Suite, which operates with PXI RF signal generators and analyzers. NI engineers will demonstrate the new LTE Measurement Suite at the 2010 4G World conference in Chicago on October 20–21....

LISTED UNDER: Services, Calibration / Test | Test and Measurement, Power Meters

Test Set Supports Robust Receiver Designs with Accurate Characterization, Conformance Testing

September 23, 2010 7:58 am | Product Releases | Comments

Agilent Technologies Inc. announced its complete optical receiver stress test solution will be expanded to test 850 nm multimode transceivers. Agilent demonstrated the new optical test solutions at ECOC 2010, Sept. 20 to 22, Torino, Italy, Lingotto Fiere Exhibition Center, Hall 3, Booth 334. The Agilent N4917A optical receiver stress test set provides the most accurate and repeatable conformance and characterization test results....

LISTED UNDER: Services, Calibration / Test

SD UHS-I Card Compliance Test Tools Now Available for Portable Consumer Electronics

September 15, 2010 8:08 am | Product Releases | Comments

Agilent Technologies Inc. announces the industry’s first secure digital ultra-high-speed (SD UHS-I) card compliance test application and a third-party compliance tool. The compliance test package, helps design engineers accelerate the turn-on and debug of SD UHS-I card-based systems used in portable consumer electronics....

LISTED UNDER: Consumer | Services, Calibration / Test

Automated MIPI Compliance Package Addresses Physical and Protocol Layer Test in the Oscilloscope

September 10, 2010 7:36 am | Product Releases | Comments

CHESTNUT RIDGE, N.Y., /PRNewswire/ -- LeCroy announced a comprehensive testing solution for the mobile phone industry specifically targeted to MIPI (Mobile Industry Processor Interface) standards. The MIPI standards are driving the next generation of mobile devices -- allowing for faster data transfer, lower power consumption, and higher resolution displays and cameras....

LISTED UNDER: Services, Calibration / Test | Test and Measurement, Oscilloscopes

Enhanced Radiated Test System from Teseq Provides More Flexibility

September 1, 2010 9:41 am | Wireless Design & Development | Product Releases | Comments

Teseq Inc. has improved its ITS 6006 (Immunity Test System) for radiated EMC immunity testing by enhancing the RF power meters used in conjunction with the unit. The ITS 6006, ideal for use in a variety of EMC applications including information technology, medical, RF, traffic telematics and mobile communications, features two updated, rugged RF power meter models, the PMR 6006 and PMU 6006, with an expanded frequency range from 1 MHz...

LISTED UNDER: Services, Calibration / Test | Test and Measurement, Power Meters

13 GHz High Speed Logic Ideal for High Volume, Low Jitter Communications, Test & Networking Applications

August 30, 2010 10:40 am | Product Releases | Comments

Hittite Microwave Corporation has released four new high speed logic products to complement its growing high speed logic product line. Operating with clock rates up to 13 GHz, and housed in plastic SMT packages, the HMC720LP3E, HMC721LP3E, HMC722LP3E, and the HMC723LP3E are ideal for deployment in high volume applications ranging from bench test equipment, ATE, optical communications, medical and industrial systems to networking and militar...

LISTED UNDER: Embedded Systems & Networking | Services, Calibration / Test

COM Express Modules with Latest Intel Atom Processors

August 26, 2010 10:10 am | Product Releases | Comments

Emerson Network Power, a business of Emerson and the global leader in enabling Business-Critical Continuity today extended its portfolio of small form factor single board computers with the availability of its COMX-430 and COMX-440 COM Express® modules. Powered by the latest Intel® Atom™ D410/D510 processors at 1....

LISTED UNDER: Boards & Modules | Services, Calibration / Test

SAS Compliance Test Software Provides Automated 6-Gbps and 12-Gbps Measurements for Oscilloscopes

August 25, 2010 9:44 am | Wireless Design & Development | Product Releases | Comments

Agilent Technologies Inc. introduces automated compliance test software for Serial Attached SCSI (SAS) physical-layer transmitter compliance testing that includes measurement support for SAS 6-Gbps and 12-Gbps interfaces. Using the Infiniium 90000 Series or 90000 X-Series oscilloscope and the automated N5412B SAS-2 compliance test software, engineers can maximize their design margins and gain greater insights into their system performan...

LISTED UNDER: Services, Calibration / Test | Test and Measurement, Oscilloscopes | Chipsets, Other

Two-Slot PXI Module Delivers 6 GHz Vector Network Analysis for Precision Automated RF Test

August 4, 2010 9:09 am | Product Releases | Comments

National Instruments announces the NI PXIe-5630 6 GHz two-port vector network analyzer (VNA), the automated test industry’s first VNA available in a compact PXI form factor. With support for full vector analysis of transmission and reflection (T/R) parameters, precision automatic calibration and flexible software-defined architecture, the new VNA is ideally suited for automated design validation and production test....

LISTED UNDER: Services, Calibration / Test

Software Simplifies Bluetooth/WLAN Module Testing

July 26, 2010 10:45 am | Product Releases | Comments

Anritsu Company introduces CombiTest, a PC-based software application that provides remote control of Anritsu’s MT8860x WLAN Test Set and MT8852B Bluetooth Test Set. CombiTest simplifies the creation of test plans to accurately and more efficiently measure the performance of Bluetooth/WLAN combinational modules....

LISTED UNDER: Services, Calibration / Test

Customizable Kit Enables Developers to Build and Test Solar Energy Harvesting Applications Without Designing Any Hardware

July 20, 2010 6:25 am | Product Releases | Comments

CHANDLER, Ariz.--(BUSINESS WIRE) -- Microchip Technology Inc. today announced that it has partnered with Cymbet Corporation to provide the world’s first customizable energy harvesting application development kit - the XLP 16-bit Energy Harvesting Development Kit. This kit includes a modular development board populated with the PIC24F16KA102 microcontroller — featuring eXtreme low power—and the capability to add PICtail™ daughter boards ...

LISTED UNDER: Services, Calibration / Test

Acquisition Expands capabilities into Energy Market

July 20, 2010 6:04 am | Wireless Design & Development | Product Releases | Comments

FAIRFAX, Va.--(BUSINESS WIRE) -- SRA International, Inc. today announced it has acquired Sentech, an energy management consulting company with expertise in renewable energy, distributed generation, energy efficiency and advanced transportation technologies. Sentech, an energy consulting firm headquartered in Bethesda, Md.

LISTED UNDER: Services, Consulting

Pratt & Whitney Gears Up for First PurePower® Engine to Test for Bombardier CSeries Aircraft

July 20, 2010 6:04 am | Product Releases | Comments

FARNBOROUGH, England, /PRNewswire-FirstCall/ -- FARNBOROUGH AIR SHOW -- Pratt & Whitney is on target for its first engine to test for the new PurePower PW1500G engine for the Bombardier* CSeries* aircraft. The engine testing begins at Pratt & Whitney's West Palm Beach facility in Florida later this summer.

LISTED UNDER: Services, Calibration / Test

PC/104 A/D and D/A Modules Operate from -40° to +85°C Without Requiring Calibration

July 19, 2010 8:07 am | Product Releases | Comments

Two new, low-cost PC/104-compatible analog I/O cards were announced recently by WinSystems. The PCM-MIO-G-AD-1 is a 16-channel, 16-bit analog input card and the PCM-MIO-G-DA-1 is an 8-channel, 12-bit analog output card. Both cards also support 48-lines of digital I/O. These small, 90 mm x 96 mm expansion boards are designed to meet customer requirements for accurate analog and digital I/O over a -40° to +85°C temperature range....

LISTED UNDER: Boards & Modules | Services, Calibration / Test | Test and Measurement, Standards / Calibration

Instrument-Grade Precision Components and Calibration Standards

July 16, 2010 10:03 am | Product Releases | Comments

Maury Microwave announces the introduction of an entirely new line of instrument-grade precision components designed to provide users with the right level of performance at the right price. This new product line, TactiCal™ by Maury, includes calibration standards manufactured to the same high quality and exacting requirements that have made Maury’s metrology-grade products the Gold Standard of the Test & Measurement industry for over 50 yea...

LISTED UNDER: Services, Calibration / Test | Test and Measurement, Standards / Calibration


You may login with either your assigned username or your e-mail address.
The password field is case sensitive.