Advertisement

Tektronix Announces Industry’s Fastest Coherent Lightwave Signal Analyzer

November 2, 2011 10:37 am | Wireless Design & Development | Product Releases | Comments

Tektronix announced the OM4106D Coherent Lightwave Signal Analyzer – the first coherent test system with 33 GHz bandwidth support. This industry-fastest performance is achieved through tight integration with the DPO70000D Series oscilloscopes for exceptional real-time performance along with purpose-built algorithms with best laser phase tolerance, no pattern length limitation and insightful displays for fast analysis and debugging of high-performance optical designs.

LISTED UNDER: Services, Calibration / Test | Test and Measurement, Analyzers, Spectrum | Receivers, Other

Automotive AntennaGuard Series with 0603 MLV Provides Fastest ESD Response

October 20, 2011 7:33 am | Product Releases | Comments

AVX Corporation has expanded its automotive multilayer varistor (MLV) product offering to include an ultra-low capacitance 0603 device that provides sub-1nS response to ESD strikes. The AEC Q200-qualified Automotive AntennaGuard Series MLV devices deliver low insertion loss, low leakage current and unsurpassed reliability compared to diode options.

LISTED UNDER: Automotive | Automotive | Services, Calibration / Test

Compact and Flexible LTE RF Design Verification and Pre-conformance Test System

October 5, 2011 7:19 am | Product Releases | Comments

Following in the footsteps of its T4010 LTE RF conformance testing solution, AT4 wireless has introduced the most compact and flexible LTE RF test system in the market for design verification and pre-conformance, the T4010 DV. This new test system offers a unique environment that allows the creation and/or customization of dedicated RF parametric test cases, based on configurable test methods.

LISTED UNDER: Services, Calibration / Test
Advertisement

14-bit ADCs Address Requirements for Communications, Instrumentation and Test

August 22, 2011 6:52 am | Wireless Design & Development | Product Releases | Comments

Analog Devices released single and dual-channel 14-bit high-speed A/D converters for use in communications, instrumentation and test and measurement applications. The new converters are asserted to meet the performance and small size requirements of the latest 3G and 4G multi-standard cellular infrastructure equipment such as CDMA2000, WB-CDMA, LTE, TD-SCDMA and multi-carrier GSM.

LISTED UNDER: Services, Calibration / Test | Receivers, Other

TÃœV Rheinland Introduces Improved ZigBee Test Environment

August 18, 2011 10:39 am | Product Releases | Comments

TÃœV Rheinland, one of only three organizations authorized to test products for compliance to ZigBee standards, has developed a proprietary software-based testing system that is faster and more flexible than previous testing environments. ZigBee is the technology for low-cost, low-power wireless sensor and control networks....

LISTED UNDER: Services, Calibration / Test

Portable Test Instrument for Electrical and Maintenance Applications

August 17, 2011 9:39 am | Product Releases | Comments

Yokogawa Corporation of America is pleased to announce the release of another high quality and well engineered product, the CW10 Clamp-On Power Meter. This unit combines the basic functionality of a standard clamp on tester, digital multimeter, and power monitor to initially diagnose maintenance and electrical issues before more expensive and sophisticated equipment may be required to analyze the performance of motors, generators and other power related equipment.

LISTED UNDER: Services, Calibration / Test

TÃœV Rheinland Introduces ZigBee Testing Environment

August 16, 2011 9:19 am | Product Releases | Comments

TÃœV Rheinland, one of only three organizations authorized to test products for compliance to ZigBee standards, has developed a proprietary software-based testing system that is faster and more flexible than previous testing environments. ZigBee is the technology for low-cost, low-power wireless sensor and control networks....

LISTED UNDER: Services, Calibration / Test

Line Impedance Stabilization Network for Conducted Emissions Testing of GCPCs

August 11, 2011 6:46 am | Product Releases | Comments

TESEQ introduces a new Line Impedance Stabilization Network (LISN) for conducted emissions testing of Grid Connected Power Conditioners (GCPC). The DC-LISN-M2-25-V1 is designed for measuring unsymmetrical disturbances on DC power ports in the frequency range from 150 kHz to 30 MHz. Research results have shown that a typical artificial mains V-network as described in CISPR 16-1-2 cannot be used for the assessment of unsymmetrical disturbances of a photovoltaic inverter’s DC port.

LISTED UNDER: Services, Calibration / Test
Advertisement

LTE Development Testing Made Easy with Toolset

August 11, 2011 5:33 am | Product Releases | Comments

Anite announced the availability of Scenario Mode, an enhancement to its Development Toolset suite for wireless device and chipset development that allows test engineers to rapidly design test scenarios (test scripts) through an easy-to-use graphical interface. With Scenario Mode, even engineers without specific programming skills are able to develop new test scripts which increases total script creation and cuts development time.

LISTED UNDER: Services, Calibration / Test

Compliance 5 EMC Test Software Adds DO-160 Module for Aerospace Applications

August 4, 2011 10:30 am | Product Releases | Comments

Teseq introduces a new aerospace test application for use in its Compliance 5 EMC test software. The DO-160 RF emissions and immunity test module makes set-up and testing fast and easy. Preloaded, standard hardware configurations and limit lines enable users to quickly configure their hardware and select the required test.

LISTED UNDER: Military-Aerospace | Services, Calibration / Test

EMC Test Software Adds DO-160 Module for Aerospace Applications

July 28, 2011 8:03 am | Product Releases | Comments

Teseq Inc. introduced an aerospace test application for use in its Compliance 5 EMC test software. The DO-160 RF emissions and immunity test module is asserted to make set-up and testing fast and easy. Preloaded, standard hardware configurations and limit lines enable users to quickly configure their hardware and select the required test.

LISTED UNDER: Military-Aerospace | Services, Calibration / Test

Anritsu Introduces New Multi-mode Signaling Tester For Wireless Devices

July 20, 2011 8:51 am | Product Releases | Comments

Anritsu Company introduces the MD8475A Signaling Tester that offers the capability to test a wide range of applications and operating systems on the latest high-speed, multi-mode LTE devices. The MD8475A broadens Anritsu’s market-leading 2G/3G and LTE test portfolio that already includes the widest available range of solutions, extending from R&D to functional test, Conformance Test (CT), Carrier Acceptance Test (CAT), manufacturing, and aftermarket repair.

LISTED UNDER: Services, Calibration / Test

SAW Band Pass Filters Target Test Equipment and General Lab Use

July 18, 2011 11:02 am | Product Releases | Comments

Crystek has introduced a new line of SAW Band Pass Filters, the CBPFS Series . Encased in a rugged SMA housing, this filter line is designed for test equipment and general lab use. Six models, with center frequency ranges from 836.5 through 1960.0 MHz, compose the CBPFS line. The Crystek CBPFS SAW Band Pass Filter line has excellent out-of-band rejection and features 50-ohm SMA connectors.

LISTED UNDER: Services, Calibration / Test | Filters, IC

Agilent Technologies Establishes Capacitance Calibration Standard for AFM-Based Scanning Microwave Microscopy

July 18, 2011 5:35 am | Product Releases | Comments

Agilent Technologies introduced the first commercially available capacitance calibration standard for an atomic force microscope (AFM). The scientific solutions provider issued calibration specifications for capacitance measurements that allow quantitative assessment of material and device properties via its award-winning Scanning Microwave Microscopy Mode.

LISTED UNDER: Services, Calibration / Test | Test and Measurement, Standards / Calibration

Capacitance Calibration Standard for AFM-Based Scanning Microwave Microscopy

July 13, 2011 10:25 am | Product Releases | Comments

Agilent Technologies introduced the first commercially available capacitance calibration standard for an atomic force microscope. The scientific solutions provider issued calibration specifications for capacitance measurements that allow quantitative assessment of material and device properties via its award-winning Scanning Microwave Microscopy Mode.

LISTED UNDER: Services, Calibration / Test | Test and Measurement, Standards / Calibration

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading