Advertisement

Bluetooth Test System

September 11, 2002 5:17 am | Product Releases | Comments

With the ME7865A, chipset developers, module manufacturers, and consumer product developers have a single, cost-effective solution that assures the performance of Bluetooth radios before submission to a Bluetooth Qualification Test Facility (BQTF). The ME7865A addresses all 16 test cases defined in the Bluetooth RF test specification up to 3 GHz....

LISTED UNDER: Services, Calibration / Test

Modules for Repeatable Calibrations

August 1, 2002 11:07 am | Product Releases | Comments

The 36584 Series AutoCal® modules provide fast, repeatable, and high-quality coaxial calibrations for 2-, 3-, and 4-port S-parameter requirements. The 36584 series covers the 10 MHz to 9 GHz frequency range and can be used with the Scorpion® VNMS. The AutoCal module characterization, which is traceable to NIST, is used to aid in the removal of normal systematic errors....

LISTED UNDER: Boards & Modules | Services, Calibration / Test | Test and Measurement, Standards / Calibration

Wireless IP Test Solution

July 11, 2002 10:20 am | Product Releases | Comments

Model Number MX880121A-02 is a software option to the 1xRTT version of Anritsu's MTT8801C Radio Communications Analyzer. With the software installed, the MT8801C functions as a link layer for connecting 1xRTT wireless Internet devices to an external application server or to the Internet via an external server....

LISTED UNDER: Services, Calibration / Test
Advertisement

Test Solution for WLAN

July 10, 2002 7:12 am | Product Releases | Comments

The VG3000E/VG6000 synthesized vector signal generator and the VN6000 wide-band IQ demodulator are designed to accelerate wireless IC development. The VG3000E/VG6000 features an RF bandwidth up to 120 MHz (ן dB). Frequency range for the VG6000 is 4.96 GHz to 6.2 GHz/250 kHz to 3.2 GHz. The VG3000E has a frequency range of 250 kHz to 3....

LISTED UNDER: Services, Calibration / Test

Automated Test System

July 10, 2002 7:12 am | Product Releases | Comments

Model 2790 SourceMeter® Switch Airbag Inflator Test System provides low initial cost, reduced test development costs, and high throughput. This is accomplished by tightly integrating sourcing, measuring, and switching functions in a single instrument,, by eliminating the need for synchronization between the computer/controller and the Model 2790, and by reducing signal routing complexity....

LISTED UNDER: Services, Calibration / Test

Test Path to 3G Leads to Flexibility and Multi-standard Instrumentation

June 6, 2002 10:43 am | Product Releases | Comments

By Yuenie Lau, Anritsu Company The migration to 3G (Figure 1) is littered with a variety of standards, none of which is the definitive answer that will be used globally. As we have gone from 2G to 2.5G formats, designers have been faced with the challenge of developing products for multiple standards....

LISTED UNDER: Services, Calibration / Test

Signaling Tester for 3G WCDMA Mobile Stations

June 4, 2002 9:36 am | Product Releases | Comments

Anritsu introduces the MD8480A WCDMA Signaling Tester, a solution that is used for verification of 3GPP WCDMA mobile stations and mobile station chipsets. Simulating a WCDMA base station, the MD8480A is used in the development phase to verify the modulation and demodulation function of the mobile station or chipset, confirm call processing functionality between the base station and mobile station, and to simulate applications....

LISTED UNDER: Services, Calibration / Test

Base Station Testing Using a Spectrum Analyzer

May 8, 2002 8:20 am | Product Releases | Comments

The quality of service a wireless network operator can provide is dependent upon the performance of the base station. By Tom Rittenhouse, IFR Systems, Inc. The quality of service a wireless network operator can provide is heavily dependent upon the performance of the base station, a large portion of providing this quality depends upon the performance of the antenna and coaxial feeder connected to the base station....

LISTED UNDER: Services, Calibration / Test | Test and Measurement, Analyzers, Spectrum
Advertisement

Test Fixtures

May 6, 2002 7:16 am | Product Releases | Comments

StratEdge announced the availability of customized test fixtures for testing their high-frequency, leaded ceramic packages. The fixtures are designed to test the entire DC through 23 GHz frequency range and provide a simultaneous contact to all DC and RF traces. These fixtures provide an interconnect to 3....

LISTED UNDER: Services, Calibration / Test

Celerity Digital Broadband Test

April 5, 2002 7:29 am | Product Releases | Comments

Celerity Digital Broadband Test was recently presented with a 2001 Technology Award at the Wireless Systems Design Conference & Expo. The CS20310B Bluetooth RF Test set analyzes and generates Bluetooth signals over the full 83.5 MHz bandwidth, ensuring RF interoperability. A broadband downconverter and high performance 300 MS/s ADC captures all of the hops in time, preserving complete time, frequency, modulation and transient informat...

LISTED UNDER: Services, Calibration / Test

Thermal Test Environment

April 4, 2002 8:30 am | Product Releases | Comments

Temptronic ThermoFixture was designed and developed for a wide range of application from component, module, and PCB testing to characterizing high performance devices and assemblies at temperature, the ThermoFixture accessory provides a moisture-free test environment for the DUT while integrated with the ATE tester and thermal airstream system for a turnkey system....

LISTED UNDER: Services, Calibration / Test

Wireless LAN/Bluetooth Test Station

April 4, 2002 8:30 am | Product Releases | Comments

Celerity Systems, a division of L-3 Communications, introduced their new CS20310C Wireless LAN/Bluetooth Test Station. Featuring 100 MHz of real-time bandwidth and 4 GB of memory, the CS20310C can capture, analyze, and playback up to eight seconds (or 12,800 hops) of signals anywhere within 2.4 GHz ISM band to reproduce actual operating environments in the lab....

LISTED UNDER: Services, Calibration / Test

Protocol Tester With UMTS Simulation and Emulation Features

April 4, 2002 8:30 am | Product Releases | Comments

Tektronix announced a new solution package that enables the development and deployment of more complex network elements for Universal Mobile Telecommunication System (UMTS) mobile networks. The UMTS Solution Package for the K1297-G20 protocol tester adds important new UMTS monitoring, simulation, emulation and conformance testing features to address the increased complexity of 3G network elements....

LISTED UNDER: Services, Calibration / Test

Boundary Scan Test and In-System Programming Environment

March 8, 2002 3:55 am | Product Releases | Comments

A new release of ASSET InterTech's ScanWorks boundary-scan (IEEE 1149.1/JTAG) test and in-system programming (ISP) environment features next-generation interconnect test tools that improve product quality by offering better test coverage and by speeding up the test development process with new simpler test development capabilities....

LISTED UNDER: Services, Calibration / Test

Top Protocol Tester

March 4, 2002 3:49 am | Product Releases | Comments

Tektronix, Inc. announced a new solution package that will further enable the development and deployment of more complex network elements for Universal Mobile Telecommunication System (UMTS) mobile networks. The newest third-generation (3G) UMTS network elements are much more complex to test than existing mobile network elements....

LISTED UNDER: Services, Calibration / Test

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading