Advertisement

Application Notes for Test Equipment

November 24, 2003 7:30 am | Product Releases | Comments

QuadTech introduces five collections of archived application notes. These collections are a compilation of application notes that provide resources for test engineers, quality engineers, test equipment operators, and those involved with the development and manufacturing of electronic products. The EST collection details how and why the most common electrical safety tests should be performed, testing terminology, discussion of procedures, op...

LISTED UNDER: Services, Calibration / Test

Bluetooth Tester

November 24, 2003 7:19 am | Product Releases | Comments

The Agilent N4010A wireless connectivity test set includes an option (Option 101) that speeds measurements and improves accuracy for high-volume manufacturing of products that incorporate Bluetooth technology. By adding I/O connectivity (Option 110), the test set will work with the Agilent 89601 vector signal analysis software and 89607 WLAN test suite software....

LISTED UNDER: Services, Calibration / Test

Calibration Module

November 24, 2003 7:19 am | Product Releases | Comments

Anritsu introduces the MN4765A optical to electrical (O/E) calibration module that transforms its Lightning 37200C/37300C vector network analyzers (VNAs) into lightwave component analyzers. A characterized, unamplified photodiode module, the MN4765A acts as an optical receiver when used with the 37200C/37300C series VNAs, which have frequency coverage up to 65 GHz....

LISTED UNDER: Services, Calibration / Test | Test and Measurement, Standards / Calibration
Advertisement

Test Fixture Boards

November 24, 2003 7:19 am | Product Releases | Comments

Advanced Interconnections offers custom engineered, microchip socketed test fixture boards that electrically interface test equipment to ball grid array (BGA) packages. The test fixture boards are multilayer FR-4 assemblies incorporating cable-to-board connectors (which provide the interface to the test system) and AIC's True BGA Socket (into which the chip packages are inserted during testing)....

LISTED UNDER: Boards & Modules | Services, Calibration / Test

Test Receiver

November 24, 2003 7:19 am | Product Releases | Comments

Berkeley introduces Yellowjacket Plus, an 802.11a Wi-Fi analysis tool with built-in GPS receiver. Yellowjacket Plus is an all-in-one, portable, wireless test receiver system with built-in spectrum analyzer that sweeps, analyzes, optimizes and secures 5 GHz Wi-Fi WISPs and Hotspots. The calibrated receiver measures all 8 OFDM 802....

LISTED UNDER: Services, Calibration / Test

Test Socket

November 24, 2003 7:19 am | Product Releases | Comments

Aries introduces a high frequency test socket for devices from 14 to 27 mm 2 wide. The socket is suited for manual testing of devices with pitches down to 0.50 mm, in applications with speeds from 1 GHz to over 10 GHz. A 4-point spring probe crown on the socket ensures scrub on solder ball oxides for reliable contact mating....

LISTED UNDER: Services, Calibration / Test

Cables for Test and Measurement

November 24, 2003 7:19 am | Product Releases | Comments

Semflex introduces the RH cable series. Designed for cable assemblies that support test and measurement instruments, this cable delivers improved phase stability versus flexure and temperature. Low attenuation is achieved through use of silver plated inner and outer conductors, and low density microporous PTFE dielectrics and FEP jackets provide consistent performance over wide temperature extremes....

LISTED UNDER: Interconnect, Cables | Services, Calibration / Test

Drive Test Equipment

November 3, 2003 6:54 am | Product Releases | Comments

ZK Celltest has added PN Scanning as an optional feature on its DXM line of test equipment. PN scanning detects and logs all desirable and undesirable (interfering) PN signals impacting working subscriber phones in a CDMA network. Undesirable PN signals at levels close to the Active Sets result in Pilot Pollution that is interference, which causes poor audio quality and high FER....

LISTED UNDER: Services, Calibration / Test
Advertisement

Cable Tester

November 3, 2003 6:54 am | Product Releases | Comments

The Fault Mapper Pro™ model CA7026 is a handheld graphical Time Domain Reflectometer (TDR) designed for identifying and locating faults on power and communication cables. Model CA7026 measures cable length and indicates the distance to cable faults and terminations, to a range of 11700 ft. The electroluminescent backlit display shows a reflection profile of the cable under test as an oscilloscope-like trace....

LISTED UNDER: Interconnect, Cables | Services, Calibration / Test

Design and Test Environments Combine

October 28, 2003 11:04 am | Product Releases | Comments

Device characterization and system simulation is possible when design and test environments are combined. Ansoft Corporation Complex communication standards and new materials pose numerous benefits and challenges for today's RF circuit designers looking to outperform the current generation of products....

LISTED UNDER: Services, Calibration / Test

Parametric Tester

October 28, 2003 10:16 am | Product Releases | Comments

Keithley introduces the S630DC/RF parametric testers with 40 GHz RF measurement capabilities. RF connections are designed into the test head and use per-pin electronics to achieve precision and reliability. The system incorporates a vector network analyzer and DC/RF probe card technology. The inherent DC resolution is 100 aA and 100 nV....

LISTED UNDER: Services, Calibration / Test

Testing Technology

October 28, 2003 10:16 am | Product Releases | Comments

ASSET introduces TopCAT (Topology and Cluster Analysis Technology). TopCAT analyzes the chematic of a Printed circuit board to identigy all of the non-boundary can devices that are connected to boundary scan devices. TopCAT automatically matches the names of the non-boundary scan devices in the design's netlist with device models archived on ASSET's web site or stored in a model library of the user....

LISTED UNDER: Services, Calibration / Test

UMTS Radio Tester

October 1, 2003 6:12 am | Product Releases | Comments

The CMU300 is a UMTS radio tester that allows function-reliable installation of the UMTS network. The CMU300 provides transmitter and receiver measurements in one instrument. During the installation phase, the CMU300 serves as a UMTS conformance tester for all components used. www.rohde-schwarz....

LISTED UNDER: Services, Calibration / Test

EMC Test System

October 1, 2003 6:12 am | Product Releases | Comments

Schaffner introduces a modular system for conducted EMC immunity testing. The Modula EMC test system standard functions include the generation of classic interference pulses such as burst and surge, as well as power quality simulations. The system has a wireless remote control capability that enables users to operate the system from a standing or sitting position....

LISTED UNDER: Services, Calibration / Test

Electrical Safety Tester

October 1, 2003 6:12 am | Product Releases | Comments

All functions on the the Guardian 1030S, including the internal 8 channel scanner, can be programmed via front panel or remotely via RS-232. The Guardian 1030S can perform AC Hipot tests over a programmable voltage range from 50 to 5000 V, with leakage current detection from 1 μA to 30 mA; DC Hipot tests over a programmable voltage range from 50 to 6000 V, with leakage current detection from 0....

LISTED UNDER: Services, Calibration / Test

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading