Advertisement

Non-Magnetic Connectors Protect Against Distortion

March 6, 2009 6:56 am | Product Releases | Comments

The Phoenix Company of Chicago introduces its series of non-magnetic connectors that protect against image and magnetic field distortion in MRI equipment, providing the necessary immunity to ensure that scans are not compromised. They can also be used in any industrial application where high-purity, non-corrosive, lightweight metals with non-magnetic characteristics are vital....

LISTED UNDER: Interconnect, Connectors
Advertisement

Multi-Position Switches Feature K Type Connectors

January 14, 2009 9:43 am | Product Releases | Comments

Ducommun Technologies, Inc. announces its QK Series of SP3T-SP6T coaxial multi-position switches that feature K type connectors with a frequency of DC to 40 GHz. Actuator options include normally open and TTL circuitry with integrated indicator circuits. Terminated models are also available with the 2....

LISTED UNDER: Interconnect, Connectors | Switches, IC

Circular Connectors Withstand up to 5 psi

January 7, 2009 11:05 am | Product Releases | Comments

ITT Interconnect Solutions' MIKQ IP68 Series circular connectors withstand up to 5 psi while maintaining 0.050 contact spacing. The devices meet IP68 standards, and all insulator and contact areas within the connectors are sealed against environmental elements. The 37-pin connectors offer a twist pin contact system, and are housed in a brass metal shell with crimped gold plated contacts....

LISTED UNDER: Interconnect, Connectors

SMT Connectors Join Boards

January 7, 2009 11:05 am | Product Releases | Comments

Mill-Max's SMT strip sockets and pin headers implement a 0.008” floating-pin design to compensate for uneven solder paste application on the board surface with a round stub-tail termination. Pin-to-pin co-planarity can be held to 0.005” for pin counts up to 20 positions (2×10). The sockets and headers are available in 2 to 64 position single-row or 4 to 72 position double-row (2×2 to 2×36....

LISTED UNDER: Boards & Modules | Interconnect, Connectors

SPDT Switches Support SMA Connectors

September 23, 2008 11:55 am | Product Releases | Comments

Ducommun Technologies' 2S and 2SE Series SPDT switches offer options for SMA connectors over a frequency range from DC to 18 GHz and DC to 24 GHz, respectively. The 2.1 oz devices include failsafe, latching self cut-off or pulse latching options with a break-before-make switching sequence. The switches exhibit 50 Ω nominal RF impedance, failsafe operating temperature from -55ºC to 85ºC ambient, latching operating temperature from -25ºC...

LISTED UNDER: Interconnect, Connectors | Switches, IC

USB Connectors Target Surface Mount Applications

September 22, 2008 12:45 pm | Product Releases | Comments

Mill-Max expands its USB family to include 2 mini USB connectors that offer more options when smaller solutions are necessary. Designed for surface mount applications, they are smaller and lighter than existing USB connectors for portable and handheld devices. They feature 5 pins (1 ID pin) and 0....

LISTED UNDER: Interconnect, Connectors

SMT Connectors Offer Secure Mating Retention

June 16, 2008 10:52 am | Product Releases | Comments

PNS? Molex, Inc. introduces its series of 2.00 mm pitch SMT wire-to-board connectors for applications that require secure electrical contact. The CLIK-Mate connector features a positive locking mechanism that provides an audible click, indicating that it is fully mated. Rated at 3.0 A, the connectors can be used for signal and power connections in a variety of end-user products that include flat panel displays, gaming devices and on-board a...

LISTED UNDER: Interconnect, Connectors

Micro Card Edge Data Connectors Target Medical Applications

April 11, 2008 7:42 am | Product Releases | Comments

The Harting micro card edge data (MCE) connector range is aimed at board-to board mezzanine or small "pluggable daughter card" applications. These MCE connectors are suitable for high rates (up to 14 Gbps) of data transmission in telecommunication, medical and industrial applications. They are available with 40 and 100 contacts in the pitch of 0....

LISTED UNDER: Medical | Interconnect, Connectors

High-Density Connectors Designed for Backplane and Orthogonal Applications

December 12, 2007 9:16 am | Product Releases | Comments

FCI introduces the ZipLine™ connector system in response to customer demand for increased signal density. Designed for both backplane and orthogonal applications, the connectors can reach speeds of 12.5 Gb/s with up to 101 signal pairs per linear inch at 1.5 mm column pitch, making ZipLine one of the highest density connectors available with press-fit termination....

LISTED UNDER: Interconnect, Connectors

Sealing Electrical Connectors: When is it Worth Moving Up to Ceramic?

November 21, 2007 5:42 am | Wireless Design & Development | Product Releases | Comments

Ceramic-to-metal seals have a number of properties that allow for a more robust, durable hermetic seal and better electrical insulation than glass-to-metal seals. Morgan Advanced Ceramics (MAC) Range of Options When engineers design a seal for feedthroughs and other electrical connectors, four general classes of material are evaluated....

LISTED UNDER: Interconnect, Connectors | Ceramics

SMA Bulkhead Connectors for OEM Applications

September 26, 2007 8:17 am | Product Releases | Comments

RF Connectors offers a variety of SMA bulkhead mount connectors for use in OEM applications. Mounting configurations include front and rear mount with solder cup electrical terminations. Male and female SMA connector interfaces are available. Connector bodies are machined brass with nickel or gold plating....

LISTED UNDER: Interconnect, Connectors

Plastic Circular Connectors Meet Demanding Medical Device Requirements

September 25, 2007 11:26 am | Product Releases | Comments

Hypertronics Corporation has expanded their patent pending HyperGrip product line. The product line now offers more configurations, including connectors with 20 (HG3), 34 (HG4), or 85 (HG6) pin positions to complement the growing 12-pin position connector (HG2). Designed specifically for the medical industry, HyperGrip is a user-configurable circular connector which is color-coded and customer key-able for accurate and quick connections on ...

LISTED UNDER: Medical | Interconnect, Connectors

SMA Flange Mount Connectors

July 18, 2007 11:52 am | Product Releases | Comments

RF Connectors, division of RF Industries, offers a variety of SMA flange mount connectors for use in OEM applications. The connectors feature solder post and solder cup electrical termination. Male and female connector interfaces are available. All flanges are standard .500 inch (12.7mm) square with ....

LISTED UNDER: Interconnect, Connectors

Card Connectors and Cover Sets

July 17, 2007 9:06 am | Product Releases | Comments

ITT Electronic Components introduces Cannon Express Card 26 pin- edge card connectors and cover sets that meet the PCMCIA industry’s demands for 34 mm and 54 mm wide modules. Stainless steel cover sets assemble easily and they can either be snapped together or ultrasonically welded. With a universal slot design with module formats measuring 5 mm deep by 75 mm long, the connectors and cover sets enable both compact ExpressCard/34 and /54 car...

LISTED UNDER: Interconnect, Connectors

Card-Edge Connectors

March 13, 2007 12:50 pm | Product Releases | Comments

FCI develops press-fit, card-edge connectors to enable the implementation of MicroTCA™ (mTCA) architecture. These vertical card-edge connectors provide 170 contacts on 0.75 mm pitch, and they enable AMCTM cards to be plugged directly to a backplane, accommodating speeds up to 10 Gb/s. The press-fit version of the connectors extends the use of MicroTCA architecture to thicker backplanes where the size and complexity of the backplane is n...

LISTED UNDER: Interconnect, Connectors

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading