Advertisement

Right Angle Connectors

May 30, 2003 11:38 am | Product Releases | Comments

The ERNI Group announces a 2 mm Hard Metric Right Angle Male Connector. The ERmet 2 mm HM connector is manufactured for gas-tight, pressfit installation into a PCB, and is designed to mate with 2 mm HM right angle or vertical female connectors. This connector is available in 5 rows, with or without an upper shield and available in A, B25, B22, B19, and C modules....

LISTED UNDER: Interconnect, Connectors

ESD Protected Connectors

April 29, 2003 7:27 am | Product Releases | Comments

Spectrum Control Series E connectors are capable of providing ESD/EFT and EMI protection all in one package, removing ground traces from the board and offering protection at the I/O ports and to all lines. The metallic front shell also provides low ground impedance. These connectors free up real estate by reducing the number of components necessary to protect circuits from ESD/EFT/EMI....

LISTED UNDER: Interconnect, Connectors

USB Connectors

April 29, 2003 7:27 am | Product Releases | Comments

The Mini USB Connector Series is designed for applications that require a high-speed data transfer interface in a compact package. The series consists of Type A, B, and AB connectors. The Mini USB connectors are shielded for EMI protection, polarized to prevent mis-mating, and rated for 5000 mating cycles....

LISTED UNDER: Interconnect, Connectors
Advertisement

Cables and Connectors

April 3, 2003 8:15 am | Product Releases | Comments

The Serial ATA, a miniaturized version of the Parallel ATA but with double its data transfer capability is now available. With a transfer speed of 150 MB/sec. And a 7-pin interface, the Serial ATA will foster development of smaller packages with improved airflow. It will allow the use of 12 V, 3 V, and 3....

LISTED UNDER: Interconnect, Connectors | Interconnect, Cables

D-SUB Connectors

March 28, 2003 9:42 am | Product Releases | Comments

Shogyo D-SUB connectors are available with conductors ranging from 9 - 37 pins; steel-tin-plated or zinc-plated shells; pin contacts of brass, high-retention phosphorous-bronze or gold-plated nickel; plastic or metal hoods; in right angle and vertical mount. Features include: current ratings from 1 - 5 amps with dielectric strength of 1,000 V for 1 minute; insulator resistance rated at 1,000 M Ohms minimum at 500 V DC; temperature resistanc...

LISTED UNDER: Interconnect, Connectors

Push-Pull DIN Connectors

February 25, 2003 12:07 pm | Product Releases | Comments

MECA introduces a family of phase and amplitude matched Wilkinson power divider/combiners furnished with quick-mating 1.0/2.3 push-pull DIN connectors for ease of cabling on system applications from 0.800 - 2.200 GHz. Standard models are available in 2, 3, and 4-way configurations and provide high isolation, low insertion loss and exceptional VSWR....

LISTED UNDER: Interconnect, Connectors

Power Connectors

February 25, 2003 12:07 pm | Product Releases | Comments

American Conec introduces its filtered combo D-SUB power connectors with integrated die cast back shell. Filter capacitors are fully integrated into the connector with capacitance ranges of 1.3 nF up to 100 nF. This filtered power connector has a standard dielectric withstanding voltage of 707 V DC, with a high voltage version of 1020 V DC available....

LISTED UNDER: Interconnect, Connectors

Adapters and Connectors

January 27, 2003 9:35 am | Product Releases | Comments

MIDISCO introduces a phase adjustable in-line adapter which offers precise, yet simple, means of phase adjustment over the frequency range DC - 4 GHz. Model MDC1089A incorporates a threaded interconnection of variable length. By tuning a phase adjustment nut, the user creates a small increment change in cable length and hence, phase, up to a maximum of 40° at 4 GHz....

LISTED UNDER: Interconnect, Connectors | Interconnect, Adapters
Advertisement

Quick Lock Connectors

January 27, 2003 9:34 am | Product Releases | Comments

Radiall introduces Quick Lock SMA (patent pending) QMA connectors. With a reliable and stabilized production, more than 30 part numbers are available from stock. QMA series is a snap-on version of brass SMA connectors. Optimized from DC to 6 GHz, QMA connectors are usable from DC to 12.4 GHz with an intermodulation level of – 120 dBc and high electrical performances....

LISTED UNDER: Interconnect, Connectors

Panel Mount Coaxial Connectors

December 2, 2002 6:08 am | Product Releases | Comments

A newly developed series of panel mount coaxial connectors designed for high performance applications where low intermodulation (– 165 dBc) and design flexibility are required, is now available from Spinner North America, a subsidiary of Spinner GmbH. The new connectors are supplied in four hole flange and bulkhead configurations and may be utilized for both "semi-rigid" (RG-401 and RG-402) and PCB launch applications in antenna...

LISTED UNDER: Interconnect, Connectors

Custom Connectors

December 2, 2002 6:08 am | Product Releases | Comments

These custom high-performance connectors are for use in a variety of commercial and military communication products, including radar, missile guidance, satellites, cellular handsets, and cellular transmitters and receivers. Among the custom connectors that can be developed are SMA, SMP, SSMA, MCX, TNC, Type N, 2....

LISTED UNDER: Interconnect, Connectors

Connectors for Cable

December 2, 2002 5:55 am | Product Releases | Comments

Compel announces their SMP compatible connector series. This innovative design provides push-on mating characteristics and facilitates tight packaging density due to its' small diameter and low profile. These new connectors are available in straight and right angle jacks and plugs for cable, bulkhead and PCB edge mount configurations, as well as a jack-to-jack "bullet" adapter....

LISTED UNDER: Interconnect, Connectors | Interconnect, Cables

Blind-mate Connectors

November 1, 2002 6:09 am | Product Releases | Comments

The BMA to SSMP families of blind-mate connectors are mechanically robust and cover a large spectrum of sizes ranging from the size of an SMA to almost 70% smaller....

LISTED UNDER: Interconnect, Connectors

Multi-Port Connectors

November 1, 2002 6:08 am | Product Releases | Comments

Multi-Port connectors are single modules integrating several coaxial connectors with the same standard interface. They feature the same electrical and mechanical performance level as standard connectors and are intermateable with them....

LISTED UNDER: Interconnect, Connectors

BMA Connectors

November 1, 2002 6:08 am | Product Releases | Comments

TRU BMA series connectors feature a high integrity push-on SMA interface that is suitable for dense modular connector arrays requiring fast and reliable connections. This line of high frequency BMA connectors has been expanded to fit many types of cables including semi-rigid sizes from .0865 inches to ....

LISTED UNDER: Interconnect, Connectors

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading