Power Drawer Connectors

December 30, 2005 7:17 am | Product Releases | Comments

Anderson Power Products (APP) has added the Power Drawer series of connectors to its connector range. The family features blind mating connectors for 35 or 75 A applications. These connectors are used on "N+1" power supply and rectifier systems suited for server, telecommunications and network applications....

LISTED UNDER: Interconnect, Connectors

M8 Connectors

November 1, 2005 9:58 am | Product Releases | Comments

ERNI announces M8 male and female connectors designed for automation technology. The first products will be three- and four-pin female connectors, and a four-pin version of the male connector. These connectors can be used to build a flexible I/O-connection on the circuit board. The interconnect geometry complies with the IEC 61067-2-101 standard....

LISTED UNDER: Interconnect, Connectors

Board-to-cable Connectors

October 3, 2005 9:16 am | Product Releases | Comments

ERNI's LPV family of IEC 60603-13 (DIN 41651) compliant connectors offers a selection of board-to-cable connectors with a 2.54 mm pitch. The IDC technology that is employed ensures gas-tight and corrosion-resistant contact with a consistently low contact resistance throughout the product's service life....

LISTED UNDER: Interconnect, Connectors | Interconnect, Cables

Surface Mount Connectors

June 1, 2005 7:22 am | Product Releases | Comments

ERNI introduces enhancements to its 1.27 mm pitch Surface Mount Connector (SMC) family. This complete redesign is also backwards compatible. With a corresponding design layout, the high-density SMC connectors can transmit differential signals at data rates of up to 2.5 Gb/s. The SMC model range is suited for diverse mezzanine, board-to-board and board-to-cable applications in industrial automation, telecom and datacom applications....

LISTED UNDER: Interconnect, Connectors

Connectors - Not Just Your Typical Interconnect Anymore

February 25, 2005 9:25 am | Product Releases | Comments

Far from a simple cable interconnect, connectors are reaching a level of technology that rivals other 21st century components By Ernest Worthman, Editorial Director Connectors have never been one of the more glamorous components of the wireless infrastructure, but they have always been one of the most critical....

LISTED UNDER: Interconnect, Connectors

Adapter Connectors

November 23, 2004 11:15 am | Product Releases | Comments

Pacific Wireless announced the AD-MCX-RPSMAF adapter. The adapter is intended for special Apple AirPort™ applications and allows use of various antennas on the Apple product. Pacific Wireless adapters have a high quality nickel plated body and contacts are gold plated for stable performance over time....

LISTED UNDER: Interconnect, Connectors | Interconnect, Adapters

COTS Connectors for Military and Aerospace Designs

November 17, 2004 9:18 am | Product Releases | Comments

The days of specialty military connectors are numbered so the cable and connector industry is reinventing this interface. By Ernest Worthman It's no secret that there is tremendous pressure for the military to go with COTS components whenever possible. Interconnect is one area where that pressure is hot and heavy, since connectors are relatively uncomplicated devices, when compared to some of the other cutting edge components For mi...

LISTED UNDER: Military-Aerospace | Military-Aerospace | Interconnect, Connectors

Watertight Connectors

October 26, 2004 11:37 am | Product Releases | Comments

IMS Connector Systems has developed a series of watertight 7/16 connectors for use in mobile radio network antennas. These connectors offer excellent mechanical and electrical properties. They are watertight (acc. to IP 68) in mated and also in unmated condition due to longitudinal and transversal sealing....

LISTED UNDER: Interconnect, Connectors

Rugged Connectors

August 30, 2004 7:45 am | Product Releases | Comments

Hypertronics announces the VME64x, a ruggedized interconnect solution designed for use in military, aerospace, and telecommunications critical applications. The solution comprises contact lead traces which provide good performance in high-speed signal applications. The connectors feature Hypertac® contact technology which offer a improved interface for immunity to shock and vibration and low mating forces....

LISTED UNDER: Interconnect, Connectors

Card Edge Connectors

August 30, 2004 7:45 am | Product Releases | Comments

Tyco introduces its AMP PACE card edge connectors. The connector is based on .100 inches× .200 inches centerlines and accepts .054 inches to .070 inches daughter cards. Eye of the needle contacts accommodate solder-free press fitting into a printed circuit board. Since this product is flat-rock compatible, no special tooling is required....

LISTED UNDER: Interconnect, Connectors

Attenuators with Connectors

August 30, 2004 7:45 am | Product Releases | Comments

Mini-Circuits introduces their line of Adaptenuators, which simply an attenuator with different types of input and output connectors. The benefits of using these devices include improved interface matching and eliminating the hassle of working with, misplacing, and stocking different types of adapters to fit attenuators....

LISTED UNDER: Interconnect, Connectors


May 14, 2004 5:38 am | Product Releases | Comments

Suitable for industrial, commercial and telecom applications, the subminiature MCX and micro-miniature MMCX connectors from SV Microwave feature snap-on mating for quick connect/disconnect. Straight and right angle plug versions are available in both series for flexible cable from RG-174 to RD-316, plus RG-405 and SR 0.

LISTED UNDER: Interconnect, Connectors

D-Subminiature Connectors

April 21, 2004 6:00 am | Product Releases | Comments

>Facilitate the delivery of RF, data, power and high voltage in a consolidated single package for numerous applications including backplanes, panel and board mounted. Widely used configurations include 3W3, 7W2, 9W4 and 8W8. 50OHgr> & 75OHgr> RF contacts are available for frequencies up to 5 GHz for various industry standard cables including 0....

LISTED UNDER: Interconnect, Connectors

Positive Locking Connectors

April 21, 2004 6:00 am | Product Releases | Comments

Duraline offers its positive locking style connectors and 30 degree housings. Duraline's positive latching connectors are weather and rain-tight and feature an internal gear tooth and latch arrangement to prevent accidental disconnection. Duraline's connectors achieve high locking pressures, yet unlocking is easily and quickly accomplished by depressing an insulated, external button....

LISTED UNDER: Interconnect, Connectors

Hazardous Location Electrical Connectors

March 15, 2004 9:53 am | Product Releases | Comments

Amphenol announces that its Star-Line EX series of electrical connectors has completed ATEX update testing for use in hazardous environments, as defined by the NEC, Article 505. The connectors provide safe interconnections to modular equipment, making them suitable for applications such as onshore and offshore oil drilling, petrochemical refineries, aircraft re-fueling stations, paint spray booth, and other manufacturing and production envi...

LISTED UNDER: Interconnect, Connectors


You may login with either your assigned username or your e-mail address.
The password field is case sensitive.