High Performance Connector Creates Rugged Cable Assemblies

October 9, 2008 6:03 am | Product Releases | Comments

San-tron, Inc. announces its Model eSMA high performance connector to address the problems of signal transmission and fragility of solder joints in hand-formable cable assemblies. This connector features an extended ferrule and enhanced performance from an internal design. It also features failure-proof coupling nuts; EZ style, solder free, captivated center contacts; and a solder damming positive cable stop....

LISTED UNDER: Interconnect, Cables

Coaxial RF Connector and Cable Assemblies for Military Applications

September 22, 2008 12:45 pm | Product Releases | Comments

ITT Interconnect Solutions introduces its coaxial RF connector along with 12 phase-matched RF cable assemblies. The connector system features a press fit contact suitable for operation to 250°C for a lifespan of 25 years. For operation up to 250°C, a cable assembly with a silicone dioxide dielectric is specified, while those applications with a temperature range to 200°C can use the cable assembly with PTFE dielectric....

LISTED UNDER: Military-Aerospace | Interconnect, Cables

Cable Assemblies Use USB and Latch

September 11, 2008 11:08 am | Product Releases | Comments

FCI’s USB+Power and Latch-N-Lok™ cable assemblies are suitable for applications including control systems, test and measurement equipment, inventory equipment and medical instrumentation. The USB+Power offers 4 power contacts to the interface, 5 A additional current-carrying capability and compliance with USB standard 2....

LISTED UNDER: Interconnect, Cables

Multiplexer Switches Signals on 100-Ω Cables

August 1, 2008 8:29 am | Product Releases | Comments

Pickering Interfaces’ 40-736 multiplexer switches communications signals carried on 100-Ω differential pair cables. The device has POTS, USB and Gigabit Ethernet capability with an 8:1 configuration as well as 100BaseT and AFDX capability with a 16:1 configuration and the ability to reverse the transmit and receive pair....

LISTED UNDER: Interconnect, Cables | Switches, IC

Filter for High Performance Cable Increases Available Bandwidth

April 11, 2008 9:47 am | Product Releases | Comments

TriQuint Semiconductor releases its filter for high-speed wideband cable television digital tuner applications that enables CATV tuner, baseband and set-top box (STB) manufacturers to build smaller, high performance DOCSIS 3.0-based high speed cable modems. These modems are optimized for fast data transfer, including advanced services such as video on demand (VOD)....

LISTED UNDER: Interconnect, Cables

Antenna and Cable Monitor Targets Cellular Industry

April 10, 2008 12:34 pm | Product Releases | Comments

Bird Technologies Group’s ACM500 antenna and cable targets monitoring antenna and cable faults within communication systems that often go undetected by transmitter-internal VSWR monitors. The device serves the role of power monitoring on combined systems with power levels up to 500 W. Like the standard ACM units, the ACM500’s stand-alone capability and alarm outputs allow for constant monitoring of power and VSWR at all critical points in t...

LISTED UNDER: Interconnect, Cables

Feeder Cable Displays Bending Properties

March 11, 2008 7:50 am | Product Releases | Comments

Radio Frequency Systems (RFS) adds its ultra-flexible, foam dielectric coaxial cable to its CELLFLEX Lite range. Due to a corrugated copper inner conductor, the CELLFLEX Lite UCF cable has optimal bending properties, and it can be site-connected directly to base station antennas. Corrugated aluminum outer conductors are common to all versions of the cable....

LISTED UNDER: Interconnect, Cables

High-performance, Lightweight Cables

January 14, 2008 4:30 am | Product Releases | Comments

Tyco Electronics announces that it has extended the M/A-COM family of high-performance, lightweight cables to include five cable types covering a variety of outer diameter sizes and constructions. The M/A-COM FA20RXLW, FA29RXLW, FA46RXLW, FN49RXLW and FN52RLLW augment the successful FN34RXLW cable line and are suited for use in electronic defense, launch vehicles, commercial aviation, space/satellites and other general purpose military appl...

LISTED UNDER: Interconnect, Cables

Addition of High Flex Round Cable

November 15, 2007 7:48 am | Product Releases | Comments

W. L. Gore & Associates has added high flex round cable to its online design tool. --> W. L. Gore & Associates has added high flex round cable to its online design tool. The addition of round cable gives equipment designers even more standard cable solutions from Gore. When demand is uncertain or small order quantities are needed, Gore has cable for applications that demand flex life reliability....

LISTED UNDER: Interconnect, Cables

Jacketed Hand Formable Cables

November 8, 2007 7:41 am | Product Releases | Comments

RFMW annouces YouForm™ high quality, low cost jacketed hand-formable cables featuring stainless steel SMA plugs on each end are now available in straight and right angle configurations. VSWR tested 1.35 to 1 at 18 GHz for SMA straight connectors and 1.35 to 1 at 12.4 GHz for SMA right angle....

LISTED UNDER: Interconnect, Cables

HDMI Cables for Home Theater Applications

October 17, 2007 6:36 am | Product Releases | Comments

Belden announces its high definition multimedia interface (HDMI) cables to enhance the home theater experience. The HDMI shielded twisted pair cables provide an interface between any compatible digital audio/video source and a compatible digital audio and/or video monitor in the home theater set-up, as well as providing support for standard, enhanced or high-definition video and multi-channel digital audio, all on a single assembly....

LISTED UNDER: Interconnect, Cables

Radiating Cable Antennas

July 17, 2007 9:06 am | Product Releases | Comments

Tyco Electronics announces a line of M/A-COM radiating cable antennas, which is designed to replace conventional antennas in applications that require wide frequency bandwidths and deployment in physical spaces that present extreme challenges to traditional antenna solutions. The M/A-COM radiating cable antenna series is suitable for cellular, Bluetooth and WLAN frequency band installations, as well as airborne, vehicular and ground-based a...

LISTED UNDER: Interconnect, Cables

Extended Reach DDR Cable Assemblies

February 26, 2007 10:55 am | Product Releases | Comments

W. L. Gore & Associates introduces its Extended Reach DDR Cable Assemblies that more than triple the reach of Double Data Rate (DDR) InfiniBand™ cables as well as reduce the size and weight for enhanced flexibility and ease of routing. These assemblies deliver good signal fidelity over longer distances in the smallest cross-sectional area, and they provide the architectural freedom to enable expansive cluster footprints within mega data...

LISTED UNDER: Interconnect, Cables

Board-to-cable Connectors

October 3, 2005 9:16 am | Product Releases | Comments

ERNI's LPV family of IEC 60603-13 (DIN 41651) compliant connectors offers a selection of board-to-cable connectors with a 2.54 mm pitch. The IDC technology that is employed ensures gas-tight and corrosion-resistant contact with a consistently low contact resistance throughout the product's service life....

LISTED UNDER: Interconnect, Connectors | Interconnect, Cables

Digital Cable Assembly

September 2, 2005 7:32 am | Product Releases | Comments

W. L. Gore & Associates, Inc. and FCI combine their technologies to offer a high data rate digital interconnect product. The data link leverages the advantages of FCI’s AirMax VS® high-speed connection system with Gore’s expertise in cable assembly development. The configuration utilizes the patented AirMax connector concept to provide desirable high frequency performance without the use of elaborate shielding....

LISTED UNDER: Interconnect, Cables


You may login with either your assigned username or your e-mail address.
The password field is case sensitive.