Jacketed Hand Formable Cables

November 8, 2007 7:41 am | Product Releases | Comments

RFMW annouces YouForm™ high quality, low cost jacketed hand-formable cables featuring stainless steel SMA plugs on each end are now available in straight and right angle configurations. VSWR tested 1.35 to 1 at 18 GHz for SMA straight connectors and 1.35 to 1 at 12.4 GHz for SMA right angle....

LISTED UNDER: Interconnect, Cables

HDMI Cables for Home Theater Applications

October 17, 2007 6:36 am | Product Releases | Comments

Belden announces its high definition multimedia interface (HDMI) cables to enhance the home theater experience. The HDMI shielded twisted pair cables provide an interface between any compatible digital audio/video source and a compatible digital audio and/or video monitor in the home theater set-up, as well as providing support for standard, enhanced or high-definition video and multi-channel digital audio, all on a single assembly....

LISTED UNDER: Interconnect, Cables

Radiating Cable Antennas

July 17, 2007 9:06 am | Product Releases | Comments

Tyco Electronics announces a line of M/A-COM radiating cable antennas, which is designed to replace conventional antennas in applications that require wide frequency bandwidths and deployment in physical spaces that present extreme challenges to traditional antenna solutions. The M/A-COM radiating cable antenna series is suitable for cellular, Bluetooth and WLAN frequency band installations, as well as airborne, vehicular and ground-based a...

LISTED UNDER: Interconnect, Cables

Extended Reach DDR Cable Assemblies

February 26, 2007 10:55 am | Product Releases | Comments

W. L. Gore & Associates introduces its Extended Reach DDR Cable Assemblies that more than triple the reach of Double Data Rate (DDR) InfiniBand™ cables as well as reduce the size and weight for enhanced flexibility and ease of routing. These assemblies deliver good signal fidelity over longer distances in the smallest cross-sectional area, and they provide the architectural freedom to enable expansive cluster footprints within mega data...

LISTED UNDER: Interconnect, Cables

Board-to-cable Connectors

October 3, 2005 9:16 am | Product Releases | Comments

ERNI's LPV family of IEC 60603-13 (DIN 41651) compliant connectors offers a selection of board-to-cable connectors with a 2.54 mm pitch. The IDC technology that is employed ensures gas-tight and corrosion-resistant contact with a consistently low contact resistance throughout the product's service life....

LISTED UNDER: Interconnect, Connectors | Interconnect, Cables

Digital Cable Assembly

September 2, 2005 7:32 am | Product Releases | Comments

W. L. Gore & Associates, Inc. and FCI combine their technologies to offer a high data rate digital interconnect product. The data link leverages the advantages of FCI’s AirMax VS® high-speed connection system with Gore’s expertise in cable assembly development. The configuration utilizes the patented AirMax connector concept to provide desirable high frequency performance without the use of elaborate shielding....

LISTED UNDER: Interconnect, Cables

RFS Braided Cables

August 3, 2005 6:38 am | Product Releases | Comments

RFS has made available its RGFLEX braided cables globally. Exhibiting good attenuation and electromagnetic screen performance, the RFS RGFLEX braided coaxial cable and connector range is appropriate for providing interconnection between low power RF equipment — such as radio basestation components, cameras for security systems, digital television systems and more....

LISTED UNDER: Interconnect, Cables

Broadband Cable and Antenna Analyzers

May 2, 2005 6:04 am | Product Releases | Comments

Anritsu introduces the Broadband Site Master S810D/S820D cable and antenna analyzers that provide wide frequency bandwidth, allowing for the detection of faults in cables and antennas used in wireless backhaul and defense applications. The models, which cover 25 MHz to 20 GHz (S820D), provide increased frequency coverage, performance and functionality in a portable instrument....

LISTED UNDER: Interconnect, Cables | Test and Measurement, Analyzers, Spectrum

Wi-Fi Testing Using a Cabled RF Environment

November 23, 2004 11:17 am | Product Releases | Comments

An elegant alternative to homegrown test environments for wireless systems. By Fanny Mlinarsky, Azimuth Systems As Wi-Fi technology matures, wireless LANs are moving from the relatively tolerant SOHO market to the demanding enterprise — a market where high network performance is needed to support mission-critical applications, a large number of network users, and a diversity of network elements....

LISTED UNDER: Interconnect, Cables | Services, Calibration / Test

Multi-function Cable, Antenna and Base Station Analyzer

August 30, 2004 7:45 am | Product Releases | Comments

Anritsu Company introduces the Cell Master( MT8212B cable, antenna, and base station analyzer. Handheld and lightweight, Cell Master combines the functionality of a cable and antenna analyzer, spectrum analyzer, AM/FM/SSB demodulator, power meter, interference analyzer, and T1/E1 analyzer. Designed to conduct measurements in the 100 kHz to 3 GHz frequency range, the MT8212B allows field technicians to locate, identify, record, and solve com...

LISTED UNDER: Interconnect, Cables | Test and Measurement, Analyzers, Spectrum

Microwave Cable

August 3, 2004 5:13 am | Product Releases | Comments

Semflex announces a microwave cable that delivers series that is specifically matched to the maximum frequency ranges of connectors such as N type, SMA, 2.92 mm, and 1.85 mm. This doubleshielded cable is suited for instrument grade applications such as PNA/VNA testing and phase critical applications such as ECM and radar....

LISTED UNDER: Interconnect, Cables

Cable Assembly Solutions Guide

May 28, 2004 7:46 am | Product Releases | Comments

RF connectors introduces their RF Cable Assembly Solutions Guide. This tri-fold brochure replaces the former multi-page catalog and features an easy 3-step selection process. In addition to the connectors and cable types shown, any manufacture's connector can be custom assembled to any cable at any length....

LISTED UNDER: Interconnect, Cables

Lead-Free Cables

April 29, 2004 10:06 am | Product Releases | Comments

Tyco Electronics announces the availability of Madison Cable brand lead-free and heavy-metal-free cables. These cables are designed with several national and international environmental initiatives in mind, including Proposition 65 in the state of California and additionally, WEEE and RoHS directives, taking effect in 2006 in the European Union, which address lead and heavy metals....

LISTED UNDER: Interconnect, Cables

Test Cable Series

April 7, 2004 11:03 am | Product Releases | Comments

Times announces a SilverLine Test Cable series for field, laboratory, and production test applications. The cables offer good phase stability with flexing. Passivated stainless steel connectors, a rugged solder/clamp attachment and multiple-layer strain relief boots are standard. The products, with solid Teflon® dielectric and a triple shield system, exhibit long flex life....

LISTED UNDER: Interconnect, Cables | Services, Calibration / Test

Cable Assembly

March 15, 2004 9:53 am | Product Releases | Comments

Gore announces a cable assembly for the ZD backplane interface. The GORE EYE OPENER® ZD cable assembly uses ePTFE as the dielectric core for the digital interconnect cable. The helically wrapped core ensures controlled electrical properties throughout the signal path. Its smaller diameter and minimum bend radius, combined with the low dielectric constant materials, allows more signal lines per area....

LISTED UNDER: Interconnect, Cables


You may login with either your assigned username or your e-mail address.
The password field is case sensitive.