Advertisement

SMA Connector and Adapter Line

June 28, 2001 7:33 am | Product Releases | Comments

RF Connectors has released two new additions to its SMA connector and adapter line designed for use with .085 and .141 semi-rigid coaxial cables. These 50 ohm connectors are perfect for applications with frequencies up to 18 GHz. The RSA-3510-1-085 is a right angle SMA male and the RSA-3560-141 is a SMA female bulkhead connector....

LISTED UNDER: Interconnect, Adapters
Advertisement

Single Port Adapters

June 11, 2001 4:49 am | Product Releases | Comments

Sealevel Systems, Inc. announces a new family of USB serial I/O products. Sealevel's new SeaLINK™ USM serial I/O products provide a single USB to RS-232 or RS-422/485/530 serial port for providing USM connectivity to legacy or non-USB compliant devices. SeaLINK adapters support standard PC data rates up to 460 K bps (RS-232) and up to 2M bps (RS-422/485/530) to provide you with the horse power your serial I/O applications require....

LISTED UNDER: Interconnect, Adapters

PCI Isolated Multi-Interface Serial I/O Adapters

June 4, 2001 5:59 am | Product Releases | Comments

Sealevel Systems introduced a new family of PCI serial I/O adapters today. The Ultra COMM + I series consists of 1 and 2 port PCI bus isolated serial I/O adapters capable of RS232/422/485 communications supporting data rates up to 460.8K bps. Each port is independently configurable to RS232 when highly reliable standard serial ports are required....

LISTED UNDER: Interconnect, Adapters

Adapters

May 30, 2001 11:55 am | Product Releases | Comments

QUICK-MATE adapters are designed without coupling nuts to allow fast, dependable connection and reduced wear on the test lead. Available in N, 7/16 and SMA interfaces and electroplated with SUCOPRO, QUICK-MATE adapters provide improved electrical conductivity and low PIM. They perform twice as many mating cycles as adapters with gold plating....

LISTED UNDER: Interconnect, Adapters

Adapter with Built in MMDS Band Coupler

May 22, 2001 10:42 am | Product Releases | Comments

Coaxial-to-waveguide adapter 2222-78C, has a built in monitoring probe for the MMDS (Wireless TV) band 2500-2686 MHz. 2222-78C adapts from the WR340 waveguide to a 7/8 inches coaxial line and has a built-in monitoring probe with a 30 db flat response over the MMDS band. The waveguide flange is a CPR340 and coaxial output is 7/8-EIA-50....

LISTED UNDER: Interconnect, Adapters

3.5 mm Precision Adapters

April 30, 2001 6:15 am | Product Releases | Comments

Four new precision adapters have been added to the RF Connector product line for use in microwave and RF applications. This 3.5 mm series has a bandwidth of DC through 34 GHz, VSWR of 1.05 .004 (f) (f = GHz) and also inter-mate with 2.9 mm and SMA connectors and adapters. Female contacts feature a four-slot configuration, ensuring that pressure is distributed evenly during the engagement of the male pin, a design which, when combined with a...

LISTED UNDER: Interconnect, Adapters

RF Adapters

April 10, 2001 10:59 am | Product Releases | Comments

Tyco Electronics announced the availability of its Between Series RF Adapters designed to provide convenient transitions between popular series coaxial connectors. These adapters allow designers to use one type of connection then adapt to other interface types. This gives designers the ability to use existing equipment interfaces with a variety of cable interfaces....

LISTED UNDER: Interconnect, Adapters

Battery Adapter

February 21, 2001 9:09 am | Product Releases | Comments

iTECH (Intelligent Technologies LLC) announces the release of a "Type 3" battery adapter compatible with NiMH and lithium ion StarTac, StarTac Piggyback and Nextel i1000 batteries, designed to interface with the iTECH IQfive(r) battery maintenance systems. The adapter features a battery communication system that identifies battery chemistry and determines charge rates....

LISTED UNDER: Interconnect, Adapters | Power, Batteries | Power, Battery

Specialized Interface Adapters And Connectors

February 13, 2001 9:48 am | Product Releases | Comments

In response to the requirements of FCC Part 15.203, RF Connectors Division of RF Industries has developed a line of specialized interface adapters and connectors which achieve compliance in three ways: reverse polarity or gender; reverse or left-handed threads; and the use of metric rather than Unified Standard threads....

LISTED UNDER: Interconnect, Connectors | Interconnect, Adapters

Signal Check Adapters For BGA Packages

February 13, 2001 9:48 am | Product Releases | Comments

A full line of Signal Check Adapters from Sunhayato Corp. is now available through Advanced Interconnections. Advanced offers Sunhayato™ brand Signal Check Adapters both with and without sockets for PC board signal testing. Terminals are provided on each adapter to access signals in three forms — thru-hole, straight pin, and right angle....

LISTED UNDER: Interconnect, Adapters

Communication Adapters

February 13, 2001 9:48 am | Product Releases | Comments

Blue2Space AB announced the release of a new family of products that enable networking of devices working to Bluetooth™ specifications at distances up to and beyond 1000 meters (3000 feet). Until now, Bluetooth solutions have been limited to the 10-100 meter range. The Blue2Space equipment dramatically extends wireless network solution options for LANs, Wireless LANs (WLAN), enterprise networks and public networks....

LISTED UNDER: Interconnect, Adapters

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading