PCI Isolated Multi-Interface Serial I/O Adapters
June 4, 2001 5:59 am | Product Releases | CommentsSealevel Systems introduced a new family of PCI serial I/O adapters today. The Ultra COMM + I series consists of 1 and 2 port PCI bus isolated serial I/O adapters capable of RS232/422/485 communications supporting data rates up to 460.8K bps. Each port is independently configurable to RS232 when highly reliable standard serial ports are required....
LISTED UNDER: Interconnect, AdaptersAdapters
May 30, 2001 11:55 am | Product Releases | CommentsQUICK-MATE adapters are designed without coupling nuts to allow fast, dependable connection and reduced wear on the test lead. Available in N, 7/16 and SMA interfaces and electroplated with SUCOPRO, QUICK-MATE adapters provide improved electrical conductivity and low PIM. They perform twice as many mating cycles as adapters with gold plating....
LISTED UNDER: Interconnect, AdaptersAdapter with Built in MMDS Band Coupler
May 22, 2001 10:42 am | Product Releases | CommentsCoaxial-to-waveguide adapter 2222-78C, has a built in monitoring probe for the MMDS (Wireless TV) band 2500-2686 MHz. 2222-78C adapts from the WR340 waveguide to a 7/8 inches coaxial line and has a built-in monitoring probe with a 30 db flat response over the MMDS band. The waveguide flange is a CPR340 and coaxial output is 7/8-EIA-50....
LISTED UNDER: Interconnect, Adapters3.5 mm Precision Adapters
April 30, 2001 6:15 am | Product Releases | CommentsFour new precision adapters have been added to the RF Connector product line for use in microwave and RF applications. This 3.5 mm series has a bandwidth of DC through 34 GHz, VSWR of 1.05 .004 (f) (f = GHz) and also inter-mate with 2.9 mm and SMA connectors and adapters. Female contacts feature a four-slot configuration, ensuring that pressure is distributed evenly during the engagement of the male pin, a design which, when combined with a...
LISTED UNDER: Interconnect, AdaptersRF Adapters
April 10, 2001 10:59 am | Product Releases | CommentsTyco Electronics announced the availability of its Between Series RF Adapters designed to provide convenient transitions between popular series coaxial connectors. These adapters allow designers to use one type of connection then adapt to other interface types. This gives designers the ability to use existing equipment interfaces with a variety of cable interfaces....
LISTED UNDER: Interconnect, AdaptersBattery Adapter
February 21, 2001 9:09 am | Product Releases | CommentsiTECH (Intelligent Technologies LLC) announces the release of a "Type 3" battery adapter compatible with NiMH and lithium ion StarTac, StarTac Piggyback and Nextel i1000 batteries, designed to interface with the iTECH IQfive(r) battery maintenance systems. The adapter features a battery communication system that identifies battery chemistry and determines charge rates....
LISTED UNDER: Interconnect, Adapters | Power, Batteries | Power, BatterySpecialized Interface Adapters And Connectors
February 13, 2001 9:48 am | Product Releases | CommentsIn response to the requirements of FCC Part 15.203, RF Connectors Division of RF Industries has developed a line of specialized interface adapters and connectors which achieve compliance in three ways: reverse polarity or gender; reverse or left-handed threads; and the use of metric rather than Unified Standard threads....
LISTED UNDER: Interconnect, Connectors | Interconnect, AdaptersSignal Check Adapters For BGA Packages
February 13, 2001 9:48 am | Product Releases | CommentsA full line of Signal Check Adapters from Sunhayato Corp. is now available through Advanced Interconnections. Advanced offers Sunhayato™ brand Signal Check Adapters both with and without sockets for PC board signal testing. Terminals are provided on each adapter to access signals in three forms — thru-hole, straight pin, and right angle....
LISTED UNDER: Interconnect, AdaptersCommunication Adapters
February 13, 2001 9:48 am | Product Releases | CommentsBlue2Space AB announced the release of a new family of products that enable networking of devices working to Bluetooth™ specifications at distances up to and beyond 1000 meters (3000 feet). Until now, Bluetooth solutions have been limited to the 10-100 meter range. The Blue2Space equipment dramatically extends wireless network solution options for LANs, Wireless LANs (WLAN), enterprise networks and public networks....
LISTED UNDER: Interconnect, Adapters
