Advertisement

Quick Disconnect Adapters

February 25, 2003 12:07 pm | Product Releases | Comments

RF Connectors' quick disconnect series includes adapters, connectors, and cable assemblies for BNC, F, N, TNC, and Mini-UF interface applications. The series includes: RFF-1445, F male QD to F female; RFT-1242, TNC female to TNC male QD; RFU-643, Mini-UHF female to Mini-UHF male QD; RFU-623-5, TNC female to Mini-UHF male QD; RFB-1152, BNC female to RCA male QD and RFB-1153, BNC female to F female QD....

LISTED UNDER: Interconnect, Adapters

Conduit Adapter

January 27, 2003 9:47 am | Product Releases | Comments

The conduit adapter for minifast ® or eurofast ® connectors is designed to attach to a standard conduit body. The adapter minimizes point-to-point wiring in fieldbus systems and is an efficient drop from the trunk cable terminating in screw terminals for one or two devices. An included gasket and mounting hardware make the adapter ideal for harsh environments....

LISTED UNDER: Interconnect, Adapters

Adapters and Connectors

January 27, 2003 9:35 am | Product Releases | Comments

MIDISCO introduces a phase adjustable in-line adapter which offers precise, yet simple, means of phase adjustment over the frequency range DC - 4 GHz. Model MDC1089A incorporates a threaded interconnection of variable length. By tuning a phase adjustment nut, the user creates a small increment change in cable length and hence, phase, up to a maximum of 40° at 4 GHz....

LISTED UNDER: Interconnect, Connectors | Interconnect, Adapters
Advertisement

Test Adapter

January 27, 2003 9:34 am | Product Releases | Comments

The Batwing™ enables test engineers to easily connect network analyzer ports to chipsets with closely spaced (0.141 inches) end-launch connectors through 65 GHz. The Batwing test adapters are phase/delay matched and fixed electrical data can be easily added to software error correction models....

LISTED UNDER: Interconnect, Adapters | Services, Calibration / Test

Precision Adapters

January 27, 2003 9:34 am | Product Releases | Comments

The Maury MPC14 connector is a precision 14 mm connector that is essentially equivalent to, and mating compatible with, GR900 type connectors. It incorporates an improved Hex/Knurl Coupling Nut and an improved center conductor inner contact (Model 2481A). the coupling nut has a 1.00-inch hex portion for accurate tightening with a torque wrench and a knurled portion, which provides a positive grip for finger tightening....

LISTED UNDER: Interconnect, Adapters

Coaxial Adapters

January 27, 2003 9:34 am | Product Releases | Comments

TRU 7-16 In-Series Adapters eliminate the need for multiple adapters when interconnecting 7-16 to type N, HN, C, LC, SQS, 7/8-EIA, and 1-5/8 EIA RF coaxial connectors. Providing ratings to 2,700 VRMS, these 50 Ohm adapters are offered in any specified male or female interface combination. Constructed with nickel or silver plated brass bodies, silver plated beryllium-copper female contacts, and silver or gold plated brass male contacts, the ...

LISTED UNDER: Interconnect, Adapters

USB to Serial I/O Adapters

December 26, 2002 8:45 am | Product Releases | Comments

Available in RS-232, RS-422/485, and RS/232/422/485 models, SeaLINK-USB+8 products make it easy to connect serial devices via a single USB port. SeaLINK-USB+8 adapters allow easy connection of up to eight non-USB compatible devices to USB ports. Data rates up to 921.6 K bps are supported and the multi-interface model, p/n 2803, is field configurable at the port level for RS-232, RS-422, or RS-485 communication....

LISTED UNDER: Interconnect, Adapters

EMI Adapters

November 8, 2002 9:28 am | Product Releases | Comments

These fiber optic EMI shielding adapters increase shielding effectiveness to greater than 㫊 dB at 4 GH while enhancing front panel aesthetics. Two mounting orientations are available. The traditional straight orientation meets industry standard mounting dimensions. The 45° angled orientation allows for a lower cable exit profile with a unique cut-out for each adapter....

LISTED UNDER: Interconnect, Adapters
Advertisement

Cable Assemblies and Adapters

September 27, 2002 7:43 am | Product Releases | Comments

     Microwave Distributors Company has published a 60 page catalog featuring an extensive line of standard flexible and semirigid cable assemblies, and coaxial adapters. Also included in this handy, desk size catalog are a few of MDC's other RF/Microwave components such as Isolators, Circulators, Detectors, Limiters, Attenuators, Terminations, and Phase Adjustable Adapters and Connectors....

LISTED UNDER: Interconnect, Adapters | Interconnect, Cables

Adapter Set

September 27, 2002 6:44 am | Product Releases | Comments

The MDC02171 SMA Phase Equal Adapter Set consists of 3 SMA in-series adapters that have the same insertion electrical lengths. This allows them to be readily interchanged in test and measurement setups without significantly degrading system calibration. The kit includes a male to female adapter (MDC02171-1), a male to male adapter (MDC02171-2), and a female to female adapter (MDC02171-3)....

LISTED UNDER: Interconnect, Adapters

Connectors and Adapters

September 11, 2002 5:38 am | Product Releases | Comments

The 1.85mm Connector was developed to go beyond the 2.4 mm connector's maximum performance. The 1.85mm Connector is threaded, (M 7.0 × .75-6G) with performance to 60 GHz, utilizing an air interface. Frequency is DC - 60 GHz. VSWR is 1.25: 1 maximum to 60 GHz. Return loss is 19 dB maximum to 60 GHz....

LISTED UNDER: Interconnect, Connectors | Interconnect, Adapters

High Temperature Adapter

August 30, 2002 4:45 am | Product Releases | Comments

The MegaPhase® Type-N is an in-series female-to-female type-N adapter. It features an operating temperature through +300°C, low VSWR and insertion loss, and rugged construction for consistent electrical performance. The maximum operating frequency is 18 GHz depending on the interface. Insertion length is 2....

LISTED UNDER: Interconnect, Adapters

Blindmate SMA Adapter

August 6, 2002 10:26 am | Product Releases | Comments

Used in microwave applications the inline blindmate adapter, which mates with standard SMA, is designed for spring loaded mounting on racks. The blindmate adapters can be used in the test lab or within a system to enable quick connect/disconnect, more connections per area and alignment without sight....

LISTED UNDER: Interconnect, Adapters

Power Adapter

May 6, 2002 7:16 am | Product Releases | Comments

Giving designers of OEM electronic equipment a robust adapter for applications requiring more than 100 W of power, Phihong provides its PSA150U power adapter. The PSA150U power adapter delivers up to 100 W of power with increased reliability, stability and overall lifetime of the power supply. PSA150U adapter's universal AC input range eliminates switching needs, and the device carries worldwide EMC compliance....

LISTED UNDER: Interconnect, Adapters

RF Coaxial N Adapters

May 6, 2002 7:16 am | Product Releases | Comments

Tru-Connector recently introduced a new series of precision N adapters that feature metrology-grade construction. Tru-Connector Precision N Adapters feature gold plated 303 stainless steel bodies, BeCu center conductors, Teflon® insulators, a swept center contact to assure low VSWR. When tested as mated pairs, they exhibit 1....

LISTED UNDER: Interconnect, Adapters

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading