Advertisement

Custom Blind Mate Coaxial Connector/Adapter Mitigates Mechanical Misalignment

October 8, 2009 12:09 pm | Product Releases | Comments

Aviel Electronics, a division of RF Industries, offers custom blind mate connectors for specific applications. General design features include a non-threaded push-on connector interface for touch-less mating. One end of the pair provides a floating, spring mounted body that moves independent of the flange mount to ensure reliable electrical contact, even with some mechanical misalignment.

LISTED UNDER: Electromechanical / Mechanical | Interconnect, Adapters

Adapter Modules for Digitally Configurable AC/DC Switching Power Supplies

October 8, 2009 12:09 pm | Product Releases | Comments

Emerson Network Power announces the addition of three case adapter modules for its iMP and iVS Series of digitally configurable AC/DC switching power supplies. The adapters — which enable both USB and Controller Area Network (CAN)/RS485bus connectivity — provide a complete interface between the host device and the I2C bus with a simple command set, enabling the highest levels of configuration flexibility....

LISTED UNDER: Boards & Modules | Interconnect, Adapters | Power, Supplies

AC/DC Adapters Target Medical Applications

March 6, 2009 6:56 am | Product Releases | Comments

Emerson Network Power releases its DA12-M series of wall-mount switching adapters for medical and information technology equipment (ITE) applications. These high-density, single output power adapters are capable of delivering 12 V at 12 W total power, and they feature a slim form factor, enabling the use of multiple adapters in dual wall outlet configurations....

LISTED UNDER: Medical | Interconnect, Adapters
Advertisement

Plug Adapters Meet ENERGY STAR ESP 2.0

January 30, 2009 10:52 am | Product Releases | Comments

Phihong's 9 and 12 V models in the PSM11R Series 10-W interchangeable plug adapters meet the ENERGY STAR® EPS 2.0 requirement. The devices exhibit min. efficiency of 77% and max. no-load power consumption of <0.5 W in output powers from 50 to 200 W and <0.3 W in output powers of <50 W....

LISTED UNDER: Interconnect, Adapters

Adapter Kit Serves On-Site Antenna Installations

December 30, 2008 7:21 am | Product Releases | Comments

Bomar Interconnect Products’ ADPT4RP 42-piece adapter kit contains the parts most often required by technicians in on-site antenna installations. The product comprises of 2 male and 2 female Type N, BNC, UHF, TNC, TNC-RT (reverse thread), TNC-RP (reverse polarity), SMA and SMA-RP (reverse polarity) 50-Ω coaxial parts, as well as 8 universal adapters and 2 flat wrenches....

LISTED UNDER: Interconnect, Adapters

Coaxial Adapters Are Available in Several Configurations

November 10, 2008 11:23 am | Product Releases | Comments

Krytar offers Model 5040 between series coaxial adapters from DC to 40 GHz. VSWR (max.) is 1.10 from DC to 18 GHz and 1.15 from 18 to 40 GHz. Connector configurations include male to male, male to female, female to male and female to female. Complete specifications, application ideas, technical notes and outline dimensions are available from the Web site....

LISTED UNDER: Interconnect, Adapters

SMC Board-to-Board Adapter Stretches Flexible Mezzanine Distances

September 22, 2008 12:45 pm | Product Releases | Comments

This SMC board-to-board-adapter from ERNI Electronics is an addition to the SMC 1.270 mm (0.050") pitch connector line, offering flexibility in its board-to-board heights ranging from 20 to 40 mm in 2 mm increments. Available in 12, 26 and 50 pins, the adapter has male contacts on both component ends, and it securely locks into a standard low profile SMT female SMC connector for a robust assembled solution....

LISTED UNDER: Interconnect, Adapters

Conversion ICs Target Notebook Adapters

September 8, 2008 6:45 am | Product Releases | Comments

Power Integrations’ TOPSwitch-HX family of AC/DC power conversion ICs are appropriate for adapters for notebook computers, LCD monitors and flat-panel TVs from 20 to 100 W. The eSIP-L-packaged devices combine a 700 V switching power MOSFET with controller and supervisory functions into a single monolithic IC while utilizing a TOP261 chip....

LISTED UNDER: Interconnect, Adapters
Advertisement

Adapter Includes Interchangeable Plugs

September 5, 2008 5:47 am | Product Releases | Comments

Phihong’s PSM08R-050(M)-R 8 W adapter comes with a micro-USB output connector and 4 interchangeable clip adapter plugs for use in power outlets worldwide. The double-insulated device offers an AC input range from 90 to 264 V, voltage rating of 5 V DC at 1.6 A and short circuit and over voltage protection....

LISTED UNDER: Interconnect, Adapters

RS232 Bluetooth Adapter Makes Data Transfer Easy

November 21, 2007 5:35 am | Product Releases | Comments

The LM048, available from LM Technologies, is one of the world’s smallest RS232 Bluetooth adapters. The unit is appropriate for either cable replacement or wireless data transfer. The versatile internal firmware fulfills various industry requirements. A top switch will turn the unit from DTE to DCE....

LISTED UNDER: Interconnect, Adapters

Male to Female Adapter

August 10, 2007 11:58 am | Product Releases | Comments

BroadWave Technologies develops a SMA female to FAKRA SMB male adapter that easily mates to FAKRA SMB female connectors. Model 412-491-315 flawlessly interconnects within the embedded plastic housing of standard FAKRA connectors. These units are suitable for automotive test applications particularly satellite radio, GPS and vehicular internet access....

LISTED UNDER: Interconnect, Adapters

Socket Adapter Systems

April 17, 2007 7:24 am | Product Releases | Comments

BGA Socket Adapter Systems from Advanced Interconnections Corp. solve reflow temperature mismatch issues when using lead-free devices on existing boards with standard solder profiles. When device packages are transitioned to lead-free, OEMs with RoHS Exempt products must change board soldering profiles and re-qualify existing components just to accommodate the higher processing temperatures required for proper lead-free device attach....

LISTED UNDER: Interconnect, Adapters

RoHS-Compliant SSOP Adapters

March 13, 2007 12:50 pm | Product Releases | Comments

Aries Electronics introduces an RoHS-compliant version of its SOWIC-to-DIP Correct-A-Chip™ adapter that can be used for prototyping and testing SSOP ICs. This adapter allows the use of 0.65 mm pitch surface mount ICs in thru-hold designs, and it can be cut to smaller sizes by the end user....

LISTED UNDER: Interconnect, Adapters

Hybrid Socket Adapter

March 13, 2007 12:50 pm | Product Releases | Comments

Advanced Interconnections Corp. announces its hybrid socket adapter design that uses both male and female pins in an interstitial pattern in 0.65 mm pitch BGA and LGA footprints. The patented design features the reliability of screw-machined terminals with multi-finger contacts in a compact SMT socket....

LISTED UNDER: Interconnect, Adapters

RoHS Compliant Sockets and Adapters

June 5, 2006 11:31 am | Product Releases | Comments

Advanced Interconnections Corporation announces the release of Catalog 16 Preview, a short form catalog featuring material specifications and part numbers for RoHS Compliant IC sockets and adapters for BGA, PGA, DIP and SIP packages. The RoHS Compliant sockets are available in a choice of insulators, including FR-4, Peel-A-Way® Removable Carriers and high temperature molded LCP....

LISTED UNDER: Interconnect, Adapters

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading