Advertisement

Jitter Filters

September 28, 2001 9:40 am | Product Releases | Comments

RLC Electronics' Jitter Filters are designed for use with jitter analysis systems. Modern digital networks may generate or transfer jitter. Excessive jitter can cause high bit error rates. Jitter filters are used to suppress the harmonic content of the reference clock and recovered clock signals....

LISTED UNDER: Filters, IC
Advertisement

Compact Narrowband Cavity Filters

September 4, 2001 4:52 am | Product Releases | Comments

K&L now offers narrowband cavity filters up to 40 GHz with both high "Q" and low "Q" designs. The traditional high "Q" designs provide users with low insertion loss solutions to their filtering needs. The low "Q" designs can be provided in extremely small packages....

LISTED UNDER: Filters, IC

Spanner Head EMI Filters

August 30, 2001 9:29 am | Product Releases | Comments

Tusonix Pi Circuit, Spanner Head EMI Filters have strong advantages that allow for the most sophisticated multi-position assemblies. This state-of-the-art suppression filter can be inserted quickly into the chassis and connected by machine lead wire wrap without the use of solder. Its slender design also makes some of the most compact mounting assemblies possible, offering a lead spacing of 0....

LISTED UNDER: Filters, IC

Feedthrough Capacitors and Filters

August 13, 2001 4:52 am | Product Releases | Comments

Schaffner EMC has released the FN 7000 Series of feedthrough capacitors and filters to combat conducted electrical interference both into and out of electronic components. The new series is ideally suited for high frequency applications that require "clean" power and data lines, including automation, data handling and communication technologies....

LISTED UNDER: Filters, IC

Feedthru Filters

July 31, 2001 4:30 am | Product Releases | Comments

Expanding circuit designers' options for EMI noise suppression, component manufacturer AVX offers a new family of ceramic chip components that combine capacitor and inductor elements in a single distributed constant circuit filter. Designated the W2F Series, these surface mountable chip filters are the latest addition to AVX's series of integrated passive components for EMI noise suppression in high-speed applications....

LISTED UNDER: Filters, IC

High Pass Filters

July 30, 2001 4:33 am | Product Releases | Comments

A Series of high pass filters includes a broadband image cleanup filter. This configuration has a low loss of 2.0 dba of loss less than 1.0db of flatness from 5000 to 11500 Mhz. Rejection for this filter is greater than 50 db from DC to 4200 Mhz. Inputs and outputs are SMA-F and the overall size of the unit is 1....

LISTED UNDER: Filters, IC

SAW Filters in GPS Applications

June 1, 2001 5:04 am | Wireless Design & Development | Product Releases | Comments

Surface Acoustic Wave (SAW) filters provide improved environment for Global Positioning System (GPS) applications. Max Hasegwa, AVX Corporation Since the earliest days of civilization, man has sought to find a reliable way to determine accurate distances and exact position in relationship to other objects....

LISTED UNDER: Filters, IC | Ceramics

Miniature Diplexer filters UMTS Signals

April 30, 2001 6:15 am | Product Releases | Comments

The miniature "IMD free" W2446D diplexer is designed for video reception and transmission in the UMTS band. Standard 43 dBm input test signals produces less than -100 dBm of IMD signals. 60 MHz DCS/UMTS Bw, (2110-2170 MHz) Insertion loss is < 1 dB and return loss is better than -17 dB. Tx to Rx isolation > 65 dB....

LISTED UNDER: Filters, IC

SAW Filters

April 10, 2001 11:07 am | Product Releases | Comments

Vectron International (VI) has introduced new series of IF SAW Filters in a 3.8 mm x 3.8 mm package. Features include standard and custom designs, center frequencies from 200 up to 440 MHz, low insertion loss, Small group delay variation, miniaturized SMD packages (3.8 × 3.8 mm), and low temperature coefficient of frequency....

LISTED UNDER: Filters, IC

Tunable Bandpass Filters

April 10, 2001 10:57 am | Product Releases | Comments

Trilithic's VF Series tunable bandpass filters are available in single-octave bandwidths from 3 to 4000 MHz. Standard models are five sections and have a 3 dB bandwidth of 5% ± 1%. Bandwidths between 1 and 12% are available. Options include 50 or 75 ohm impedance and manual or software control....

LISTED UNDER: Filters, IC

Delay Line Filters

April 10, 2001 10:56 am | Product Releases | Comments

Delay Line Filters are an integral part of RF Power Amplifier feed forward chains. Trans Tech offers Delay Line filters in the 3 to 20 nanosecond range for the low power (less than 3 W) path. Phase linearity of 2 degrees and amplitude variation as low as 0.2 dB is achieved with a new SMT (surface mount) package....

LISTED UNDER: Filters, IC

Lowpass Filters

April 10, 2001 10:37 am | Product Releases | Comments

RLC Electronics' fourth order Bessel Lowpass Filters combine group delay characteristics with rejection characteristics. Maximally flat group delay in the frequency domain is accomplished with the Bessel polynomial, also known as the Thomson Filter. These filters should be regarded as compromise designs for pulsed systems where truthful reproduction of the pulse shape is important....

LISTED UNDER: Filters, IC

LC Filters For LMDS CPE

April 10, 2001 10:28 am | Product Releases | Comments

Piezo Technology introduces models 8631 and 8632 LC Filters for the Customer Premise Equipment (CPE) transceiver element of the LMDS/MMDS wireless network. The filters are packaged as was proof true SMT devices that will completely support fully automated assembly operations. In general, the transmit path filters feature center frequencies in the 450 MHz to 650 MHz range and the receive path filters center frequencies in the 1200 MHz to 1...

LISTED UNDER: Filters, IC

GPS Filters and Diplexers

April 10, 2001 10:20 am | Product Releases | Comments

Microwave Support Systems introduced a new series of GPS Filters and Diplexers covering the 1575 MHz and 1227 MHz bands. Features include typical mid band insertion loss of 0.8 dB, 1 dB bandwidth of 25 MHz, ± 50 MHz rejection of 35 dB, and ± 100 MHz rejection in excess of 60 dB. Standard configuration is TNC Female connectors....

LISTED UNDER: Filters, IC

Monolithic Quartz Filters

April 10, 2001 8:34 am | Product Releases | Comments

The Fox Filter line is built around two-pole, monolithic quartz filters. Due to the inherent high "Q""of quartz, as well as its excellent frequency stability over wide temperature ranges, quartz filters are far superior to those built using ceramic devices and/or those using LC circuitry....

LISTED UNDER: Filters, IC

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading