Advertisement

EMI Filters

May 6, 2002 7:16 am | Product Releases | Comments

Spectrum Control introduces a new line of EMI/RFI power filters with current ratings to 75 amps designed for use in 48 volt and 60 volt applications. These new filters feature a turn on/turn off window, overvoltage protection, and short-circuit protection (transient protection may also be specified)....

LISTED UNDER: Filters, IC

RF SAW Filters

January 29, 2002 3:56 am | Product Releases | Comments

Toshiba America Electronic Components (TAEC) introduced a small RF surface acoustic wave (SAW) filters. By employing chip scale packaging (CSP), Toshiba Corp. achieved a 40 percent size reduction and 60 percent weight reduction as compared to conventional RF SAW filters. In addition, the devices offer the same electrical performance as SAW Filters offered in larger packaging, giving designers a well-rounded solution for smaller form factor ...

LISTED UNDER: Filters, IC

Cavity Bandpass Filters

January 14, 2002 4:09 am | Product Releases | Comments

Integrated Microwave now offers a complete line of broadcast quality, ultra-narrow bandpass cavity filters for 900 MHz STL receivers. Designed as preselector filters, these cavities offer low loss, steep skirts and extreme ruggedness. Typical uses include rejection of other STL signals, paging services and cell phone band noise....

LISTED UNDER: Filters, IC
Advertisement

Air Filters

January 7, 2002 5:35 am | Product Releases | Comments

Universal Air Filter has introduced a new heat exchanger air filters that are NEBS-compliant for telecommunications enclosure applications. Heat exchanger technology allows telecom equipment design engineers to reduce reliance on conventional air conditioning for electronics equipment cooling. The new air filters help heat exchangers operate at full peak efficiency and minimize maintenance Quadrafoam air filters feature sturdy one-piece r...

LISTED UNDER: Filters, IC

DCS and GSM Band Diplexers and Filters

September 28, 2001 10:01 am | Product Releases | Comments

Compel Electronics announced the availability of its family of filters and diplexers for GSM and DCS transmit and receive frequencies. Operating between 880 - 960 MHz for GSM and 1710 - 1880MHz for DCS, the family offers maximum insertion loss of 1.5 dB, VSWR of 1.1:1 maximum and isolation of > 80dB....

LISTED UNDER: Filters, IC

Jitter Filters

September 28, 2001 9:40 am | Product Releases | Comments

RLC Electronics' Jitter Filters are designed for use with jitter analysis systems. Modern digital networks may generate or transfer jitter. Excessive jitter can cause high bit error rates. Jitter filters are used to suppress the harmonic content of the reference clock and recovered clock signals....

LISTED UNDER: Filters, IC

Compact Narrowband Cavity Filters

September 4, 2001 4:52 am | Product Releases | Comments

K&L now offers narrowband cavity filters up to 40 GHz with both high "Q" and low "Q" designs. The traditional high "Q" designs provide users with low insertion loss solutions to their filtering needs. The low "Q" designs can be provided in extremely small packages....

LISTED UNDER: Filters, IC

Spanner Head EMI Filters

August 30, 2001 9:29 am | Product Releases | Comments

Tusonix Pi Circuit, Spanner Head EMI Filters have strong advantages that allow for the most sophisticated multi-position assemblies. This state-of-the-art suppression filter can be inserted quickly into the chassis and connected by machine lead wire wrap without the use of solder. Its slender design also makes some of the most compact mounting assemblies possible, offering a lead spacing of 0....

LISTED UNDER: Filters, IC
Advertisement

Feedthrough Capacitors and Filters

August 13, 2001 4:52 am | Product Releases | Comments

Schaffner EMC has released the FN 7000 Series of feedthrough capacitors and filters to combat conducted electrical interference both into and out of electronic components. The new series is ideally suited for high frequency applications that require "clean" power and data lines, including automation, data handling and communication technologies....

LISTED UNDER: Filters, IC

Feedthru Filters

July 31, 2001 4:30 am | Product Releases | Comments

Expanding circuit designers' options for EMI noise suppression, component manufacturer AVX offers a new family of ceramic chip components that combine capacitor and inductor elements in a single distributed constant circuit filter. Designated the W2F Series, these surface mountable chip filters are the latest addition to AVX's series of integrated passive components for EMI noise suppression in high-speed applications....

LISTED UNDER: Filters, IC

High Pass Filters

July 30, 2001 4:33 am | Product Releases | Comments

A Series of high pass filters includes a broadband image cleanup filter. This configuration has a low loss of 2.0 dba of loss less than 1.0db of flatness from 5000 to 11500 Mhz. Rejection for this filter is greater than 50 db from DC to 4200 Mhz. Inputs and outputs are SMA-F and the overall size of the unit is 1....

LISTED UNDER: Filters, IC

SAW Filters in GPS Applications

June 1, 2001 5:04 am | Wireless Design & Development | Product Releases | Comments

Surface Acoustic Wave (SAW) filters provide improved environment for Global Positioning System (GPS) applications. Max Hasegwa, AVX Corporation Since the earliest days of civilization, man has sought to find a reliable way to determine accurate distances and exact position in relationship to other objects....

LISTED UNDER: Filters, IC | Ceramics

Miniature Diplexer filters UMTS Signals

April 30, 2001 6:15 am | Product Releases | Comments

The miniature "IMD free" W2446D diplexer is designed for video reception and transmission in the UMTS band. Standard 43 dBm input test signals produces less than -100 dBm of IMD signals. 60 MHz DCS/UMTS Bw, (2110-2170 MHz) Insertion loss is < 1 dB and return loss is better than -17 dB. Tx to Rx isolation > 65 dB....

LISTED UNDER: Filters, IC

SAW Filters

April 10, 2001 11:07 am | Product Releases | Comments

Vectron International (VI) has introduced new series of IF SAW Filters in a 3.8 mm x 3.8 mm package. Features include standard and custom designs, center frequencies from 200 up to 440 MHz, low insertion loss, Small group delay variation, miniaturized SMD packages (3.8 × 3.8 mm), and low temperature coefficient of frequency....

LISTED UNDER: Filters, IC

Tunable Bandpass Filters

April 10, 2001 10:57 am | Product Releases | Comments

Trilithic's VF Series tunable bandpass filters are available in single-octave bandwidths from 3 to 4000 MHz. Standard models are five sections and have a 3 dB bandwidth of 5% ± 1%. Bandwidths between 1 and 12% are available. Options include 50 or 75 ohm impedance and manual or software control....

LISTED UNDER: Filters, IC

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading