Advertisement

Combline Coaxial Filters

March 2, 2006 7:02 am | Product Releases | Comments

Link Microtek announces a series of coaxial combline bandpass filters to its range of in-house manufactured products. Known as the AMQ-COMB series, the filters are engineered to achieve large passband-to-stopband ratios and Q factors as high as 3500. The combline filters consist of a set of coupled circular resonators between two parallel ground planes, each resonator having an associated variable loading capacitor....

LISTED UNDER: Filters, IC
Advertisement

Harmonic Waveguide Filters

October 3, 2005 9:16 am | Product Releases | Comments

Microtek introduces a range of in-house manufactured absorptive harmonic waveguide filters, which, when used with high-power microwave amplifiers, avoid the potential damage that reflective filters can cause. The AMQ-HARM series of filters is designed to absorb signals with harmonic frequencies higher than the specified pass band, rather than reflecting them back to the amplifier....

LISTED UNDER: Filters, IC

Single- and Dual-band SAW Filters

August 3, 2005 6:38 am | Product Releases | Comments

Murata Electronics introduces single-band (SAFEB) and dual-band (SAWEP) SAW filters for use in cell phones, combining film micro-machining technology with high-density mounting capabilities and resin sealing. The SAFEB series is now available in the dimensions of 1.35 × 1.05 × 0.6 mm, weighing 0....

LISTED UNDER: Filters, IC

BAW Filters and Duplexers

August 3, 2005 6:33 am | Product Releases | Comments

Royal Philips Electronics announces a family of advanced, bulk acoustic wave (BAW) filters and duplexers that enhance the performance of multimedia mobile phones. The filters feature patented reduced form factor chip-scale packaging technology. This improves the performance and reception of GSM and 3G mobile phones, while reducing space in mobile handset designs....

LISTED UNDER: Filters, IC

EMI/RFI Filters

June 2, 2005 7:23 am | Product Releases | Comments

Spectrum Control introduces a line of high current/high voltage resin sealed EMI/RFI filters with current ratings to 100 A. This filter line offers continuous voltage ratings up to 1250 VDC/240 VAC (400 Hz) and capacitance values from 1000 pF to 0.22µf. Spectrum Control’s high current/high voltage EMI/RFI filters are recognized to UL 60950 and certified to CSA C22....

LISTED UNDER: Filters, IC

SAW Resonators and Filters

November 23, 2004 11:15 am | Product Releases | Comments

Saelig announces the availability of a range of surface acoustic wave resonators and filters from Nanjing Electronic Devices Institute of China (NEDI). NEDI offers SAW filter designs encompassing the frequency range 20.0 MHz to 1.8 GHz. Applications for SAW technology components are diverse, including front-end filters for remote control and wireless alarms, RF modulators in consumer electronic equipment, FM broadcast local oscillators, sig...

LISTED UNDER: Filters, IC

Modules and Filters

July 2, 2004 5:23 am | Product Releases | Comments

Spectrum Control introduces a range of power entry modules and power line filters. The modules and filters offer a low cost EMI solution to filtering power problems. Power entry modules and power line filters can be used in a variety of applications including medical instrumentation and equipment, power supplies, telecommunication systems, and more....

LISTED UNDER: Boards & Modules | Filters, IC

Family of Low Profile Filters for Microwave Applications

February 2, 2004 8:06 am | Product Releases | Comments

Spectrum FSY Microwave introduces a line of low profile, highly stable, microwave filters. These filters meet or exceed MIL environmental requirements and are designed for use in a variety of space-constrained applications, including avionics and UAVs. The filters are available in lumped element, interdigital and combline filter topologies for bandpass, highpass, or lowpass applications....

LISTED UNDER: Filters, IC

Surface Mount Filters

February 2, 2004 5:40 am | Product Releases | Comments

K&L Microwave is pleased to announces the IB60 series of filters, Microminiature packages, with the addition of gullwing pins and ground tabs for surface mount applications. These parts are manufactured using solder with a minimum liquidous temperature of 221°C. Chip and wire and ceramic product topologies are available in this configuration....

LISTED UNDER: Filters, IC

Ceramic Filters

January 21, 2004 10:48 am | Product Releases | Comments

...

LISTED UNDER: Filters, IC

Cavity Filters

January 21, 2004 10:48 am | Product Releases | Comments

K&L Microwave's series of Mini-Pack cavity filters have been designed to meet the harsh requirements of a military environment. The Mini-Pack filters feature maximum performance within minimum package size. Frequency range covers 6 GHz to 18 GHz with options of 4 to 10 sections and – 3 dB bandwidths can be realized between 3 and 10% of center frequency....

LISTED UNDER: Filters, IC

Band Pass Filters

November 24, 2003 7:19 am | Product Releases | Comments

RLC Electronics tubular cable band pass filters offers the performance of the BPF series. They can be manufactured with either .141 or .086 semi rigid cable. SMA male connectors are standard. Power (average, maximum) is 10 watts for the BPF-2500, 25 watts for the BPF-500, 50 watts for the BPF-750 and 200 watts for the BPF-1250....

LISTED UNDER: Filters, IC

Filters

November 3, 2003 6:54 am | Product Releases | Comments

...

LISTED UNDER: Filters, IC

Low-pass Filters

October 1, 2003 6:12 am | Product Releases | Comments

EMI Filter Company introduces the "XS" series, a solder-in filter style. This filter has a body diameter of .105 inches and a flange diameter of .125 inches. The device is .500 inches long with leads and the body length os this part is .100 inches. Available in capacitance values to 5000 pF, all filters in the series are rated at 5 amps DC....

LISTED UNDER: Filters, IC

Filters and Diplexers

September 2, 2003 8:42 am | Product Releases | Comments

K&L Microwave's complete line of waveguide filters and diplexers are designed with the demands of the military and other high reliability environments in mind. The 7WP01-00029 is one example of this rugged product line. With very low insertion loss, inherent to waveguide filters, these products are capable of handling significant power loads with little dissipation in the filter....

LISTED UNDER: Filters, IC

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading