Advertisement

Skyworks High-Power, Ceramic-Based Filters Serve Military and Homeland Security Markets

June 13, 2011 10:22 am | Product Releases | Comments

Skyworks Solutions introduced connectorized, high power filters for military, homeland security, airborne and high-end commercial transceiver applications. These smaller, lighter and more portable solutions offer customers significant design benefits and flexibility when compared to the more traditional and much larger metallic-cavity filters.

LISTED UNDER: Military-Aerospace | Filters, IC
Advertisement

High-voltage COTS Filters Perform over an Extended Temperature Range

May 18, 2011 2:16 pm | Product Releases | Comments

LCR  Electronics, a leading manufacturer of EMI filters and electronic control products as well as high-end enclosures for military, telecom and commercial applications, now offers a line of single phase 300 VAC 50/60Hz COTS filters ideal for high reliability applications as found in the lighting, military and medical industries.

LISTED UNDER: Filters, IC

Band-Pass MMIC Filters in Compact SMT Packages

April 18, 2011 9:23 am | Product Releases | Comments

Hittite Corporation has introduced three new SMT packaged MMIC Band-Pass Tunable Filters which are ideal for pre-selection in multi-band communication systems, wideband radar, and in test and measurement equipment. Tunable over a 4.0 GHz to 19.0 GHz frequency range, these three new, ultra-compact, varactor-tuned, MMIC filters are inherently stable and their small physical size and insensitivity to environmental conditions provide a superior...

LISTED UNDER: Semiconductors, MMIC | Filters, IC

MLV Clamps Transients and Filters EMI in One Ultra-Compact Device

March 10, 2011 7:21 am | Product Releases | Comments

AVX Corporation provides designers the ability to clamp transients and filter EMI at a significantly higher voltage with the expansion of its Transguard® multilayer varistor series. Designed for all small handheld devices, the miniature 0201 bi-directional transient voltage suppressor provides minimal signal distortion and low insertion loss....

LISTED UNDER: Filters, IC

Two Innovative Chip Filters for Cellular Band Applications

December 8, 2010 9:02 am | Product Releases | Comments

Taiyo Yuden’s latest lines of chip filters optimize the performance, while minimizing the size, of mobile phones. The exceptionally compact EIA 0603 size multilayer dual low pass filter is designed for use with multi-band smartphones, while two new optimized EIA 0805 size multilayer diplexers were developed for use with mobile phones....

LISTED UNDER: Filters, IC

High Pass Filters Designed for Test and Lab Use

November 24, 2010 7:00 am | Product Releases | Comments

Crystek has introduced a new line of High Pass Filters, designated the CHPFL Series. Encased in a rugged SMA housing, this filter line is designed for test equipment and general lab use. Five models, with frequency ranges from DC to 100 MHz through 1 GHz, compose the CHPFL line.<br><br> The Crystek CHPFL High Pass Filter line has excellent out-of-band rejection, and features 7th Order Butterworth Response and 50 ohm SMA conne...

LISTED UNDER: Services, Calibration / Test | Filters, IC

Low Pass Filters Designed for Test Equipment and Lab Use

November 11, 2010 7:12 am | Product Releases | Comments

Crystek has introduced the CLPFL Series, a new line of Low Pass Filters. Encased in a rugged SMA housing, this filter line is designed for test equipment and general lab use. Five models, with frequency ranges from DC to 100 through 500 MHz, compose the CLPFL line. The Crystek CLPFL Low Pass Filter line has excellent out-of-band rejection, and features 7th Order Butterworth Response and 50 ohm SMA connectors....

LISTED UNDER: Services, Calibration / Test | Filters, IC

Low Pass Filters Designed for Test Equipment and General Lab Use

June 1, 2010 11:39 am | Product Releases | Comments

Crystek has introduced a new line Low Pass Filters, the CLPFL Series. Encased in a rugged SMA housing, this filter line is designed for test equipment and general lab use. Five models, with frequency ranges from DC to 100 through 500 MHz, compose the CLPFL line. The Crystek CLPFL Low Pass Filter line has excellent out-of-band rejection, and features 7th Order Butterworth Response and 50 ohm SMA connectors....

LISTED UNDER: Services, Calibration / Test | Filters, IC

Filters Improve Liquid Filtration Performance in Semiconductor Manufacturing

August 3, 2009 9:13 am | Product Releases | Comments

W. L. Gore & Associates (Gore) announces a major advancement in filtration technology with the release of GORE® Filters for Semiconductor Applications. This new family of 20 nm- to 100 nm-rated cartridge filters for chemicals, dilute chemicals, and ultrapure water in wet process tools incorporates a new high-flow ePTFE (expanded polytetrafluoroethylene) filtration media that allows a drop-in retention upgrade from 100 nm to 30 nm, enabling cleaner recirculation baths, reduced processing times and significant savings in cost of ownership.

LISTED UNDER: Filters, IC

Customizable Broadband and WiMAX Filters

May 26, 2009 6:59 am | Product Releases | Comments

Sangshin Elecom offers fully customizable Broadband and WiMax filters. A leading supplier of ceramic filters, Sangshin offers over 700 designs in these areas with frequency coverage from  6.0GHz in both narrow and ultra wide bandwidths. Configurations range from 2.5 mm through 6 mm heights and from 2 to 6 poles....

LISTED UNDER: Filters, IC

Broadband Filters and ADC Drivers Offer High Performance

January 14, 2009 9:43 am | Product Releases | Comments

Linear Technology introduces its family of five single and dual high performance, wide bandwidth lowpass active filter/ADC driver amplifier products that provide solutions in a small form-factor for filtering applications in broadband wireless communications and signal processing equipment. The filter's lowpass cut-off frequency up to 2....

LISTED UNDER: Filters, IC

Filters/ADC Drivers Target Broadband Wireless Equipment

November 21, 2008 10:08 am | Product Releases | Comments

Linear Technology's LTC660x family of broadband active filters/ADC drivers perform in broadband wireless communications and signal processing equipment. The dual-channel programmable 2.5-MHz LTC6603 offers adjustable of fixed gain, frequency control over a 100:1 frequency range, max. amplitude mismatch of ±0....

LISTED UNDER: Filters, IC

Power Quality Filters Offer Low Harmonic Distortion

September 22, 2008 12:45 pm | Product Releases | Comments

Schaffner’s FN 3410 and FN 3412 Series ECOsine™ power quality filters reduce total harmonic current distortion (THID) to less than 5% in three-phase power electronics with six-pulse rectifier front ends, such as AC or DC motor drives. The FN 3410 Series operates on 50 Hz grids with power ratings from 4 to 160 kW over a voltage range from 380 to 500 V....

LISTED UNDER: Filters, IC

Cavity Filters Use EM Software

September 16, 2008 11:38 am | Product Releases | Comments

MtronPTI’s WiMAX cavity filter series utilizes a re-configurable design platform fully modeled in EM (electromagnetic) simulation software in passband center frequencies from 2.30 to 2.70 GHz and a bandwidth range from 0.04% to 0.2% 1 dB. The device allows for use in Rx ?and/or Tx modes and multiple cross-coupling schemes with four transmission zeroes placed on either side of the passband....

LISTED UNDER: Filters, IC

Design Complex Filters Without Writing Software

September 16, 2008 11:38 am | Product Releases | Comments

Quickfilter Technologies. Inc. has released QuckfilterPro-4A Software, version 4.0. The software is used to design filters that will be implemented in Quickfilter's QF4A512 programmable signal converter IC. Version 4.0 provides users with an enhanced user interface, several new filter types, a free-form filter drawing tool and the ability to create inverse transfer functions with the click of one button....

LISTED UNDER: Filters, IC

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading