Advertisement

MLV Clamps Transients and Filters EMI in One Ultra-Compact Device

March 10, 2011 7:21 am | Product Releases | Comments

AVX Corporation provides designers the ability to clamp transients and filter EMI at a significantly higher voltage with the expansion of its Transguard® multilayer varistor series. Designed for all small handheld devices, the miniature 0201 bi-directional transient voltage suppressor provides minimal signal distortion and low insertion loss....

LISTED UNDER: Filters, IC
Advertisement

Two Innovative Chip Filters for Cellular Band Applications

December 8, 2010 9:02 am | Product Releases | Comments

Taiyo Yuden’s latest lines of chip filters optimize the performance, while minimizing the size, of mobile phones. The exceptionally compact EIA 0603 size multilayer dual low pass filter is designed for use with multi-band smartphones, while two new optimized EIA 0805 size multilayer diplexers were developed for use with mobile phones....

LISTED UNDER: Filters, IC

High Pass Filters Designed for Test and Lab Use

November 24, 2010 7:00 am | Product Releases | Comments

Crystek has introduced a new line of High Pass Filters, designated the CHPFL Series. Encased in a rugged SMA housing, this filter line is designed for test equipment and general lab use. Five models, with frequency ranges from DC to 100 MHz through 1 GHz, compose the CHPFL line.<br><br> The Crystek CHPFL High Pass Filter line has excellent out-of-band rejection, and features 7th Order Butterworth Response and 50 ohm SMA conne...

LISTED UNDER: Services, Calibration / Test | Filters, IC

Low Pass Filters Designed for Test Equipment and Lab Use

November 11, 2010 7:12 am | Product Releases | Comments

Crystek has introduced the CLPFL Series, a new line of Low Pass Filters. Encased in a rugged SMA housing, this filter line is designed for test equipment and general lab use. Five models, with frequency ranges from DC to 100 through 500 MHz, compose the CLPFL line. The Crystek CLPFL Low Pass Filter line has excellent out-of-band rejection, and features 7th Order Butterworth Response and 50 ohm SMA connectors....

LISTED UNDER: Services, Calibration / Test | Filters, IC

Low Pass Filters Designed for Test Equipment and General Lab Use

June 1, 2010 11:39 am | Product Releases | Comments

Crystek has introduced a new line Low Pass Filters, the CLPFL Series. Encased in a rugged SMA housing, this filter line is designed for test equipment and general lab use. Five models, with frequency ranges from DC to 100 through 500 MHz, compose the CLPFL line. The Crystek CLPFL Low Pass Filter line has excellent out-of-band rejection, and features 7th Order Butterworth Response and 50 ohm SMA connectors....

LISTED UNDER: Services, Calibration / Test | Filters, IC

Filters Improve Liquid Filtration Performance in Semiconductor Manufacturing

August 3, 2009 9:13 am | Product Releases | Comments

W. L. Gore & Associates (Gore) announces a major advancement in filtration technology with the release of GORE® Filters for Semiconductor Applications. This new family of 20 nm- to 100 nm-rated cartridge filters for chemicals, dilute chemicals, and ultrapure water in wet process tools incorporates a new high-flow ePTFE (expanded polytetrafluoroethylene) filtration media that allows a drop-in retention upgrade from 100 nm to 30 nm, enabling cleaner recirculation baths, reduced processing times and significant savings in cost of ownership.

LISTED UNDER: Filters, IC

Customizable Broadband and WiMAX Filters

May 26, 2009 6:59 am | Product Releases | Comments

Sangshin Elecom offers fully customizable Broadband and WiMax filters. A leading supplier of ceramic filters, Sangshin offers over 700 designs in these areas with frequency coverage from  6.0GHz in both narrow and ultra wide bandwidths. Configurations range from 2.5 mm through 6 mm heights and from 2 to 6 poles....

LISTED UNDER: Filters, IC

Broadband Filters and ADC Drivers Offer High Performance

January 14, 2009 9:43 am | Product Releases | Comments

Linear Technology introduces its family of five single and dual high performance, wide bandwidth lowpass active filter/ADC driver amplifier products that provide solutions in a small form-factor for filtering applications in broadband wireless communications and signal processing equipment. The filter's lowpass cut-off frequency up to 2....

LISTED UNDER: Filters, IC

Filters/ADC Drivers Target Broadband Wireless Equipment

November 21, 2008 10:08 am | Product Releases | Comments

Linear Technology's LTC660x family of broadband active filters/ADC drivers perform in broadband wireless communications and signal processing equipment. The dual-channel programmable 2.5-MHz LTC6603 offers adjustable of fixed gain, frequency control over a 100:1 frequency range, max. amplitude mismatch of ±0....

LISTED UNDER: Filters, IC

Power Quality Filters Offer Low Harmonic Distortion

September 22, 2008 12:45 pm | Product Releases | Comments

Schaffner’s FN 3410 and FN 3412 Series ECOsine™ power quality filters reduce total harmonic current distortion (THID) to less than 5% in three-phase power electronics with six-pulse rectifier front ends, such as AC or DC motor drives. The FN 3410 Series operates on 50 Hz grids with power ratings from 4 to 160 kW over a voltage range from 380 to 500 V....

LISTED UNDER: Filters, IC

Design Complex Filters Without Writing Software

September 16, 2008 11:38 am | Product Releases | Comments

Quickfilter Technologies. Inc. has released QuckfilterPro-4A Software, version 4.0. The software is used to design filters that will be implemented in Quickfilter's QF4A512 programmable signal converter IC. Version 4.0 provides users with an enhanced user interface, several new filter types, a free-form filter drawing tool and the ability to create inverse transfer functions with the click of one button....

LISTED UNDER: Filters, IC

Cavity Filters Use EM Software

September 16, 2008 11:38 am | Product Releases | Comments

MtronPTI’s WiMAX cavity filter series utilizes a re-configurable design platform fully modeled in EM (electromagnetic) simulation software in passband center frequencies from 2.30 to 2.70 GHz and a bandwidth range from 0.04% to 0.2% 1 dB. The device allows for use in Rx ?and/or Tx modes and multiple cross-coupling schemes with four transmission zeroes placed on either side of the passband....

LISTED UNDER: Filters, IC

BAW Filters Enable WiMax and WLAN Co-Existance

August 25, 2008 7:57 am | Product Releases | Comments

Skyworks Solutions, Inc. announces its bulk acoustic wave (BAW) filters for customer premise equipment (CPE) to allow co-existence between wireless local area networks (WLAN) in the home and enterprise, and WiMAX networks which cover wider areas including neighborhoods and cities. Since both networks operate at very closely spaced frequency bands, these BAW filters reject the interfering frequencies while allowing the desired signals to pas...

LISTED UNDER: Filters, IC

Integrated EMI Filters and the Need for More Bandwidth

December 12, 2007 5:36 am | Product Releases | Comments

In previous generations of cell phones, when the design called for more data to be moved around, the solution was to add more data lines. Only a handful of data lines were sufficient at first, since there was only basic numeric data to be displayed and data rates were rather low. We all remember the old analog flip phones with their LED displays, you pushed the keypad and a digit appeared....

LISTED UNDER: Filters, IC

Thin Film Low Pass Filters

November 15, 2007 7:48 am | Product Releases | Comments

State of the Art (SOTA), Inc. announces an addition of thin film low pass filters to its high frequency product line. --> State of the Art (SOTA), Inc. announces an addition of thin film low pass filters to its high frequency product line. Sub-miniature case size (0.150 × 0.100 × 0.025) low pass filters (LPF) are available on 99% alumina substrate constructed using high stability thin film planar technology, 50 ohm terminations a...

LISTED UNDER: Filters, IC

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading