Advertisement

Filters and Diplexers

September 2, 2003 8:42 am | Product Releases | Comments

K&L Microwave's complete line of waveguide filters and diplexers are designed with the demands of the military and other high reliability environments in mind. The 7WP01-00029 is one example of this rugged product line. With very low insertion loss, inherent to waveguide filters, these products are capable of handling significant power loads with little dissipation in the filter....

LISTED UNDER: Filters, IC
Advertisement

DAC with Digital Interpolation Filters

September 2, 2003 8:28 am | Product Releases | Comments

Maxim introduces the MAX5858, a dual, 10-bit, 300Msps DAC with integrated digital interpolation filters. This device integrates two, 10-bit DAC cores, 2x/4x programmable digital interpolation filters, divide-by-N clock output, and an internal reference. The >MAX5858 also features digital control of channel gain matching to >within plusmn> 0....

LISTED UNDER: Filters, IC

Power Line Filters

July 30, 2003 9:51 am | Product Releases | Comments

Spectrum Control introduces a full line of 48 VDC Power Line Filters. The filters feature a range of attenuation characteristics and have current ratings available from 6 amps to 260 amps. The voltage rating is 250 VAC maximum. These filters offer effective filtering from 100 kHz to 3 MHz with proper installation....

LISTED UNDER: Filters, IC

Block Filters

July 30, 2003 9:51 am | Product Releases | Comments

Schurter introduces a line of block filters that include 1-phase filters up to 30 amps at 250 volts. They are designed to perform in the low-pass frequency range of up to 300 MHz, and are effective at reducing differential (or symmetrical) noise attenuation in switch-mode power supplies. Filter reliability is rated at > 200 K MTBF....

LISTED UNDER: Filters, IC

Dual EMI Air Filters

May 30, 2003 11:46 am | Product Releases | Comments

Broadband dual EMI air filters from Universal Air Filter integrate technology that meets the EMI/RFI noise shielding requirements of broadband communications equipment utilizing forced air cooling techniques. The Broadband air filter integrates the honeycomb and/or stainless steel mesh EMI shield into the air filter assembly....

LISTED UNDER: Filters, IC

Ceramic EMI Filters

May 30, 2003 11:38 am | Product Releases | Comments

Tusonix's 4304 Press-In Ceramic EMI filters are suited for a variety of microwave and RF applications that include attenuators, oscillators, synthesizers, and combiners. These EMI filters have a flange diameter or .156 ± .005 (3.96 ± 0.13 metric), an overall length of .625 ± .025 (15....

LISTED UNDER: Filters, IC

Transmit and Receive Filters

May 30, 2003 11:38 am | Product Releases | Comments

Trilithic's Transmit & Receive filters are designed with state-of-the-art software and are ideal for UMTS applications. The UMTS Receive Filter maintains a low insertion loss and stability over 70° of temperature shift, while the Transmit Filters achieve loss levels of 2.1 dB or less without adding distortion....

LISTED UNDER: Filters, IC

MEMS High-Q Micro-Filters

May 1, 2003 11:33 am | Product Releases | Comments

MEMS high-Q micro-filters offer a combination of compact size and high performance. The fabrication process for resonant structures yield accuracies to 1 micron, allowing repeatability of an identical frequency response in mass production. Structural parts including resonators are silicon based with gold plating....

LISTED UNDER: Filters, IC

Mini Air Filters

January 27, 2003 9:47 am | Product Releases | Comments

Universal Air Filter introduces new mini air filters that are fully framed, cleanable air filters for ruggedized mobile rackmount computers in applications such as medical, telecommunications, and seismic imaging....

LISTED UNDER: Filters, IC

Low Pass Filters

July 10, 2002 7:12 am | Product Releases | Comments

Flann Microwave has extended their range of performance low pass microwave filters from 2.6 to 112 GHz passband. The filters are precision manufactured from solid brass and are used for removing undesirable higher harmonics. Typical applications include source refinement and swept frequency measurement....

LISTED UNDER: Filters, IC

Common Mode Filters

June 10, 2002 11:35 am | Product Releases | Comments

The CSF Series of common mode filters are specifically designed for power applications. Features include no gap "H" ferrite cores; continuous inductance and SFR flow; four sizes with vertical or horizontal core mounting with industry standard footprints; inductance values 1 MHz to 120 MHz; maximum DC currents ....

LISTED UNDER: Filters, IC

EMI Filters

May 6, 2002 7:16 am | Product Releases | Comments

Spectrum Control introduces a new line of EMI/RFI power filters with current ratings to 75 amps designed for use in 48 volt and 60 volt applications. These new filters feature a turn on/turn off window, overvoltage protection, and short-circuit protection (transient protection may also be specified)....

LISTED UNDER: Filters, IC

RF SAW Filters

January 29, 2002 3:56 am | Product Releases | Comments

Toshiba America Electronic Components (TAEC) introduced a small RF surface acoustic wave (SAW) filters. By employing chip scale packaging (CSP), Toshiba Corp. achieved a 40 percent size reduction and 60 percent weight reduction as compared to conventional RF SAW filters. In addition, the devices offer the same electrical performance as SAW Filters offered in larger packaging, giving designers a well-rounded solution for smaller form factor ...

LISTED UNDER: Filters, IC

Cavity Bandpass Filters

January 14, 2002 4:09 am | Product Releases | Comments

Integrated Microwave now offers a complete line of broadcast quality, ultra-narrow bandpass cavity filters for 900 MHz STL receivers. Designed as preselector filters, these cavities offer low loss, steep skirts and extreme ruggedness. Typical uses include rejection of other STL signals, paging services and cell phone band noise....

LISTED UNDER: Filters, IC

Air Filters

January 7, 2002 5:35 am | Product Releases | Comments

Universal Air Filter has introduced a new heat exchanger air filters that are NEBS-compliant for telecommunications enclosure applications. Heat exchanger technology allows telecom equipment design engineers to reduce reliance on conventional air conditioning for electronics equipment cooling. The new air filters help heat exchangers operate at full peak efficiency and minimize maintenance Quadrafoam air filters feature sturdy one-piece r...

LISTED UNDER: Filters, IC

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading