Band-Pass MMIC Filters in Compact SMT Packages
April 18, 2011 9:23 am | Product Releases | CommentsHittite Corporation has introduced three new SMT packaged MMIC Band-Pass Tunable Filters which are ideal for pre-selection in multi-band communication systems, wideband radar, and in test and measurement equipment. Tunable over a 4.0 GHz to 19.0 GHz frequency range, these three new, ultra-compact, varactor-tuned, MMIC filters are inherently stable and their small physical size and insensitivity to environmental conditions provide a superior...
LISTED UNDER: Semiconductors, MMIC | Filters, ICMLV Clamps Transients and Filters EMI in One Ultra-Compact Device
March 10, 2011 7:21 am | Product Releases | CommentsAVX Corporation provides designers the ability to clamp transients and filter EMI at a significantly higher voltage with the expansion of its Transguard® multilayer varistor series. Designed for all small handheld devices, the miniature 0201 bi-directional transient voltage suppressor provides minimal signal distortion and low insertion loss....
LISTED UNDER: Filters, ICTwo Innovative Chip Filters for Cellular Band Applications
December 8, 2010 9:02 am | Product Releases | CommentsTaiyo Yuden’s latest lines of chip filters optimize the performance, while minimizing the size, of mobile phones. The exceptionally compact EIA 0603 size multilayer dual low pass filter is designed for use with multi-band smartphones, while two new optimized EIA 0805 size multilayer diplexers were developed for use with mobile phones....
LISTED UNDER: Filters, ICHigh Pass Filters Designed for Test and Lab Use
November 24, 2010 7:00 am | Product Releases | CommentsCrystek has introduced a new line of High Pass Filters, designated the CHPFL Series. Encased in a rugged SMA housing, this filter line is designed for test equipment and general lab use. Five models, with frequency ranges from DC to 100 MHz through 1 GHz, compose the CHPFL line.<br><br> The Crystek CHPFL High Pass Filter line has excellent out-of-band rejection, and features 7th Order Butterworth Response and 50 ohm SMA conne...
LISTED UNDER: Services, Calibration / Test | Filters, ICLow Pass Filters Designed for Test Equipment and Lab Use
November 11, 2010 7:12 am | Product Releases | CommentsCrystek has introduced the CLPFL Series, a new line of Low Pass Filters. Encased in a rugged SMA housing, this filter line is designed for test equipment and general lab use. Five models, with frequency ranges from DC to 100 through 500 MHz, compose the CLPFL line. The Crystek CLPFL Low Pass Filter line has excellent out-of-band rejection, and features 7th Order Butterworth Response and 50 ohm SMA connectors....
LISTED UNDER: Services, Calibration / Test | Filters, ICHigh Speed Differential Interfaces and the Need for Common Mode Filtering and Protection
September 29, 2010 12:18 pm | by Jonathan Harris, ON Semiconductor | Articles | CommentsIn the operating environment seen by electronics today there are numerous sources of electromagnetic interference (EMI) and radio frequency interference (RFI). This is due in large part to the increased use of RF technology. These types of interference result in the need for common mode filtering in applications utilizing differential interfaces.
Low Pass Filters Designed for Test Equipment and General Lab Use
June 1, 2010 11:39 am | Product Releases | CommentsCrystek has introduced a new line Low Pass Filters, the CLPFL Series. Encased in a rugged SMA housing, this filter line is designed for test equipment and general lab use. Five models, with frequency ranges from DC to 100 through 500 MHz, compose the CLPFL line. The Crystek CLPFL Low Pass Filter line has excellent out-of-band rejection, and features 7th Order Butterworth Response and 50 ohm SMA connectors....
LISTED UNDER: Services, Calibration / Test | Filters, ICFilters Improve Liquid Filtration Performance in Semiconductor Manufacturing
August 3, 2009 9:13 am | Product Releases | CommentsW. L. Gore & Associates (Gore) announces a major advancement in filtration technology with the release of GORE® Filters for Semiconductor Applications. This new family of 20 nm- to 100 nm-rated cartridge filters for chemicals, dilute chemicals, and ultrapure water in wet process tools incorporates a new high-flow ePTFE (expanded polytetrafluoroethylene) filtration media that allows a drop-in retention upgrade from 100 nm to 30 nm, enabling cleaner recirculation baths, reduced processing times and significant savings in cost of ownership.
LISTED UNDER: Filters, ICCustomizable Broadband and WiMAX Filters
May 26, 2009 6:59 am | Product Releases | CommentsSangshin Elecom offers fully customizable Broadband and WiMax filters. A leading supplier of ceramic filters, Sangshin offers over 700 designs in these areas with frequency coverage from 6.0GHz in both narrow and ultra wide bandwidths. Configurations range from 2.5 mm through 6 mm heights and from 2 to 6 poles....
LISTED UNDER: Filters, ICBroadband Filters and ADC Drivers Offer High Performance
January 14, 2009 9:43 am | Product Releases | CommentsLinear Technology introduces its family of five single and dual high performance, wide bandwidth lowpass active filter/ADC driver amplifier products that provide solutions in a small form-factor for filtering applications in broadband wireless communications and signal processing equipment. The filter's lowpass cut-off frequency up to 2....
LISTED UNDER: Filters, ICFilters/ADC Drivers Target Broadband Wireless Equipment
November 21, 2008 10:08 am | Product Releases | CommentsLinear Technology's LTC660x family of broadband active filters/ADC drivers perform in broadband wireless communications and signal processing equipment. The dual-channel programmable 2.5-MHz LTC6603 offers adjustable of fixed gain, frequency control over a 100:1 frequency range, max. amplitude mismatch of ±0....
LISTED UNDER: Filters, ICPower Quality Filters Offer Low Harmonic Distortion
September 22, 2008 12:45 pm | Product Releases | CommentsSchaffner’s FN 3410 and FN 3412 Series ECOsine™ power quality filters reduce total harmonic current distortion (THID) to less than 5% in three-phase power electronics with six-pulse rectifier front ends, such as AC or DC motor drives. The FN 3410 Series operates on 50 Hz grids with power ratings from 4 to 160 kW over a voltage range from 380 to 500 V....
LISTED UNDER: Filters, ICCavity Filters Use EM Software
September 16, 2008 11:38 am | Product Releases | CommentsMtronPTI’s WiMAX cavity filter series utilizes a re-configurable design platform fully modeled in EM (electromagnetic) simulation software in passband center frequencies from 2.30 to 2.70 GHz and a bandwidth range from 0.04% to 0.2% 1 dB. The device allows for use in Rx ?and/or Tx modes and multiple cross-coupling schemes with four transmission zeroes placed on either side of the passband....
LISTED UNDER: Filters, ICDesign Complex Filters Without Writing Software
September 16, 2008 11:38 am | Product Releases | CommentsQuickfilter Technologies. Inc. has released QuckfilterPro-4A Software, version 4.0. The software is used to design filters that will be implemented in Quickfilter's QF4A512 programmable signal converter IC. Version 4.0 provides users with an enhanced user interface, several new filter types, a free-form filter drawing tool and the ability to create inverse transfer functions with the click of one button....
LISTED UNDER: Filters, ICBAW Filters Enable WiMax and WLAN Co-Existance
August 25, 2008 7:57 am | Product Releases | CommentsSkyworks Solutions, Inc. announces its bulk acoustic wave (BAW) filters for customer premise equipment (CPE) to allow co-existence between wireless local area networks (WLAN) in the home and enterprise, and WiMAX networks which cover wider areas including neighborhoods and cities. Since both networks operate at very closely spaced frequency bands, these BAW filters reject the interfering frequencies while allowing the desired signals to pas...
LISTED UNDER: Filters, IC
