Advertisement

Ceramic Package Quartz Crystal for Implantable Applications

August 11, 2009 12:53 pm | Wireless Design & Development | Product Releases | Comments

Micro Crystal's newest MHz quartz crystal, the CC7A-T1A, is designed for applications in implantable medical and medical telemetry, avionics and automotive markets. This precision timing crystal has a package height of 0.90 mm and a footprint of 3.2 x 1.5 mm. According to the company, this is the smallest size available for implantable crystals and expands the company's offering of implantable reliable crystals.

LISTED UNDER: Crystals

Automotive-grade Ceramic SMD Crystals Withstand Higher Levels of Shock and Vibration

August 3, 2009 11:43 am | Wireless Design & Development | Product Releases | Comments

Fox Electronics recently introduced two new series of ceramic SMD (surface mount device) automotive-grade crystals built to operate at extended temperature ranges and engineered to withstand higher levels of shock and vibration. The FXA5032B and FXA7050B crystals are used in a variety of automotive timing applications, including GPS navigation, high-end audio and video systems, wireless phones, collision warning systems, Antilock Brake System controller, RADAR and onboard computer systems.

LISTED UNDER: Automotive | Automotive | Crystals

A Key Component for Intelligent Transportation Systems

April 14, 2009 9:02 am | Wireless Design & Development | Product Releases | Comments

Proper timing components will not only produce optimal performance of your end design, but also deliver the most cost effective solution. By NDK America, Inc. Figure 1. Intelligent transportation systems could be use in accident avoidance between cars as signals would detect encroaching danger and automatic braking would be applied....

LISTED UNDER: Crystals
Advertisement

Silicon Clocks Announces MEMS Temperature Stability Breakthrough

March 9, 2009 8:16 am | Wireless Design & Development | Product Releases | Comments

Silicon Clocks announced its breakthrough CMEMS-ZeroThermal™ passive temperature compensation technology that enables MEMS resonators to exhibit comparable temperature stability to quartz crystals, while simplifying oscillator design and reducing power and circuit size. First-generation MEMS oscillator solutions use resonators whose frequency varies quickly in response to temperature variations, typ.

LISTED UNDER: Crystals

VCO Operates from 787 to 805 MHz

August 25, 2008 7:57 am | Wireless Design & Development | Product Releases | Comments

Crystek Crystals introduces its Model CVCO55CC-0787-0805 VCO that operates from 787 to 805 MHz with a control voltage range of 0.3 V to 4.7 V. This VCO features a typical phase noise of -122 dBc/Hz at 10 kHz offset with optimal linearity. It is packaged in the industry-standard 0.5" X 0.5" SMD package....

LISTED UNDER: Crystals

SAW Clock Oscillator Provides Low Jitter Performance

June 16, 2008 10:52 am | Wireless Design & Development | Product Releases | Comments

PNS? Crystek Crystals announces its 1 GHz SAW clock oscillator (CCSO) that was designed using FR5 PCB and SAW (surface acoustic wave) crystal technology to provide a low noise, low jitter performance with true SineWave output. The resulting oscillator features -142 dBc/Hz phase noise at 10 kHz offset....

LISTED UNDER: Crystals

Mini OCXO Offers High Phase Noise Performance

May 8, 2008 11:57 am | Wireless Design & Development | Product Releases | Comments

Precision SC-Cut Crystal Frequency up to 250 MHz Small Hermetic Package Greenray Industries combines precision crystal technology with a low noise oscillator and multiplier to develop a family of miniature, ovenized crystal oscillators that are capable of delivering high phase noise performance up through 250 MHz....

LISTED UNDER: Crystals

VCO Operates from 2425 MHz to 2440 MHz

April 11, 2008 7:42 am | Wireless Design & Development | Product Releases | Comments

Crystek Crystals Corporation unveils its CVCO55CC-2425-2440 VCO that operates from 2425 MHz to 2440 MHz with a control voltage range of 0.3 V to 4.7 V. It features a typical phase noise of -113 dBc/Hz at 10 KHz offset, and it has optimal linearity. The VCO is packaged in the industry-standard 0....

LISTED UNDER: Crystals
Advertisement

Stratum 3 Compliant Product

March 11, 2008 8:29 am | Wireless Design & Development | Product Releases | Comments

MtronPTI introduces a Stratum 3 precision TCXO/TCVCXO product family. The M610x Series is a fully Stratum 3 compliant product, and the M611x Series is a general purpose TCXO/TCVCXO, featuring ۪.3 ppm stability performance over the full industrial temperature range (㫀°C to +85°C)....

LISTED UNDER: Crystals

Ultra-miniature Quartz Crystal

January 14, 2008 4:30 am | Wireless Design & Development | Product Releases | Comments

MMD Components introduces an ultra-miniature quartz crystal that has a wide frequency range of 16 to 60 MHz and can operate in temperatures as low as 㫀°C and as high as +85°C. Measuring 2 × 2.5 mm, with a maximum profile of just 0.55 mm — the smallest available in production quantities — MMD's X series crystals are hermetically sealed in a 4-pad ceramic package and delivered on tape and reel for easy pick and place...

LISTED UNDER: Crystals

Series of Mount Crystals

November 8, 2007 7:41 am | Wireless Design & Development | Product Releases | Comments

NDK announces the availability of a series of ultra small, thin, surface mount crystals. The NX2016AA series measures L=2.0mm × W=1.6mm × H=0.45mm, measuring half the volume of any of NDK’s other crystal products. These crystals operate in a fundamental frequency range of 24 to 80 MHz while weighing just 6 mg....

LISTED UNDER: Crystals

Low Power RF Transceiver

October 17, 2007 6:36 am | Wireless Design & Development | Product Releases | Comments

Maxim Integrated Products introduces its MAX2830 single-chip, direct-conversion, low power 802.11g/b RF transceiver with integrated power amplifier, Rx/Tx/antenna diversity switches and crystal oscillator circuitry. Its small size makes it well suited for Wi-Fi, PDA, VoIP and cellular handset applications....

LISTED UNDER: Crystals

Miniature Quartz Crystal for Size Restrained Applications

May 22, 2007 8:57 am | Wireless Design & Development | Product Releases | Comments

NDK announces a series of ultra small, thin, surface mount crystals. The NX2016AA series measures 2.0(L) 3 1.6(W) 3 0.45(H) mm. These crystals operate in a fundamental frequency range of 24 to 80 MHz while weighing 6 mg. Their frequency tolerance is 䔳 ppm to 𫏌 ppm over the operating temperature range of 㪢 to +75°C....

LISTED UNDER: Crystals

Low Power Crystal Oscillator

February 26, 2007 10:55 am | Wireless Design & Development | Product Releases | Comments

EM Microelectronic introduces its EM7604, an advanced low-power CMOS circuit intended for use with a 32.768 kHz tuning fork crystal as a low frequency clock oscillator. Except for the crystal, no other external components are required. In order to achieve a high frequency accuracy, the matched crystals should have a 䔸 ppm tolerance or tighter....

LISTED UNDER: Crystals

Low-jitter VCXO

October 19, 2006 8:40 am | Wireless Design & Development | Product Releases | Comments

MMD Components announces a line of compact, low-jitter low-voltage positive emitter coupled logic (LVPEC) voltage-controlled crystal oscillators (VCXOs) with frequency ranges up to 700 MHz and utilizing inverted mesa and AT strip crystals. Package size is 5 × 7 × 1.5 mm. The VCXOs are especially suitable in applications with extreme environmental conditions....

LISTED UNDER: Crystals

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading