Advertisement
Product Releases
Subscribe to Wireless Design and Development

Diagonal Polarized Horn Antenna for Wireless Test Applications

June 20, 2001 5:03 am | Comments

A new diagonal polarized horn antenna specifically designed for wireless test applications was announced by ETS-Lindgren. The antenna has two orthogonally placed feeds for simultaneous measurements in north horizontal and vertical polarizations. Polarization can be either linear or circular. Cross polarization isolation is better than 25 dB....

Antennas For Bluetooth Applications

June 20, 2001 5:03 am | Comments

Centurion Wireless Technologies introduces two new antennas for Bluetooth applications: the BlueChip™ and the MicroBlue antennas. The BlueChip antenna is an internal antenna that offers high-gain performance (> 2.0 dBi) with a wide bandwidth. It's small and lightweight with PCB surface mount-applicable in vertical or horizontal positions without sacrificing performance - and can be delivered in tape and reel packaging....

Antenna Material for Base Station Applications

June 20, 2001 5:03 am | Comments

R04232® Antenna Material was developed specifically for use in base station applications. This new, cost effective material offers physical properties that enhance circuit performance and simplify circuit assembly. The material can be used in circuits for base stations antennas, as well as in PCS, GSM, LMDS and Bluetooth systems....

Advertisement

7-Element Yagi Antenna

June 20, 2001 5:03 am | Comments

A lightweight, broadband PCS yagi is now available from Antenna Specialists, an Allen Telecom company. Model ASPM998 has been designed to meet the needs of high volume, rapid deployment found in Wireless Local Loop, Wireless Fixed Terminal and repeater installation. The antenna may be wall or pole mounted, allowing for versatile installation options and choice of linear, vertical or horizontal polarization....

1. DRAM Technology In A Wireless World

June 20, 2001 5:03 am | Comments

Kevin Widmer, Micron Technology, Inc. Ask engineers what they need in a wireless memory and often the answer is low cost followed by low power and high performance. DRAM technology is finding widespread acceptance in wireless applications because it offers low cost and high performance. Memory suppliers like Micron Technology, Inc....

SiGe Low Noise Amplifier Provides 1.8 dB for 802.11a

June 20, 2001 5:03 am | Comments

Maxim Integrated Products introduced a 5 GHz SiGe LNA optimized for 802.11a and HiperLAN2 WLAN systems. The MAX2648 provides 17 dB gain, 1.8 dB noise figure, and 0 dBm input IP3 at 5.2 GHz while consuming 12mA. The high gain, low noise, and high linearity performance make it flexible for use as a first stage LNA, an LO buffer, or a transmitter driver amplifier....

Electromechanical Transducer

June 20, 2001 5:03 am | Comments

Project Unlimited offers more sound output in a smaller package with its new SMT-753 electromechanical transducer. The new unit features a low profile package 3.5 mm in height with a sound output level of 98 dBA. Additional features of the SMT-753 include a voltage range from 3.0 V to 2.6 V and resonant frequency of 2839 Hz, SMD mounting....

Bandpass Filter

June 20, 2001 5:03 am | Comments

Microwave Filter Company introduces the Model 14042 bandpass filter. This filter is used to prevent PCS interference at the ENG receive site. It passes the entire ENG band (channels 1 through 10, 1990 - 2500 MHz). The unit provides stopband rejection of 25 dB (minimum) at 1910 MHz and 2580 MHz, with a passband insertion loss of 1....

Advertisement

Modulation Analysis Software

June 20, 2001 5:03 am | Comments

Anritsu Company introduced modulation analysis software that expands the measurement capability of its MS8608A and MS8609A transmitter testers to include GSM and EDGE. With the software, the transmitter testers can conduct power, frequency and modulation accuracy measurements on next-generation signals....

Digital Up-Converter

June 20, 2001 5:03 am | Comments

Intersil introduced the latest addition to the CommLink™ family of software defined radio (SDR). In addition to supporting legacy and next-generation wireless protocols, the ISL5217 quad programmable up-converter (quad-PUC) can simultaneously accommodate up to four cellular channels. The CommLink ISL5217 is a quad-PUC that operates in the transmit section of cellular base stations, enabling wireless, cellular communications....

Cellular Jamming Device

June 20, 2001 5:03 am | Comments

Image Sensing Systems announced the availability of MOBILE BLOCKER™, a cellular telephone and pager jamming device that has the ability to effectively block the transmission and reception of mobile telephone and pager signals within a 40-meter (135 foot) circle with optimal placement. The device works by emitting an encoded signal from a base transmitter at the same frequency of pager and cellular communications....

Programmable SONET/SDH OC-48 PHY

June 18, 2001 4:56 am | Comments

Cypress Semiconductor announced the availability of samples of the PSI2G100S, the second in its family of Programmable Serial Interface (PSI(TM)) chips. The PSI2G100S integrates a SONET/SDH OC-48 (2.5 Gbps) transceiver, clock data recovery (CDR) circuitry, a SERDES, 100k gates of programmable logic, and 240 Kbits of communications memory, targeting OC-48/STM-12 optical terminators, SONET/SDH routers and add-drop MUX subsystems....

High Power X Band

June 18, 2001 4:56 am | Comments

Aethercomm P/N SSPA 9.5-10.5-20 is a high power, X band, Solid State Power amplifier. Class AB biasing affords high output power (pulsed or CW) while keeping efficiencies at high levels. This unit can be operated pulsed or CW. Small signal gain across a 1 GHz bandwidth is 40 dB minimum. Typical output power is 20 watts across the band....

Coaxial Connector Utilized In Bluetooth Applications

June 18, 2001 4:56 am | Comments

Hirose's U.FL offers a low mated height of a mere 2.5mm. The connector has been adopted by leading equipment makers for antenna connection of Bluetooth and is fast becoming a defacto standard for Bluetooth. The new wireless system allows devices, including cellular phones, PDAs and laptops, to communicate with one another within a 10-foot radius....

Telecom/Datacom Enclosures For Indoor And Outdoor Use

June 18, 2001 4:56 am | Comments

A new line of wall and pole mount aluminum enclosures designed to protect telecom and datacom electronics and electrical equipment in both indoor and outdoor environments has been introduced by Pentair Electronic Packaging. The new COMLINE™ enclosures are ideal for remote applications and may be modified for battery backup....

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading