Advertisement
Product Releases
Subscribe to Wireless Design and Development

Molded Grommeting

April 30, 2001 6:15 am | Comments

Micro Plastics announced a new product line of molded grommeting. This flexible grommeting is molded in nylon 6/6 and can be used for round, square, or irregular shaped holes to protect wires and tubing from sharp panel edges and knock outs. It is attached quickly and easily using no special tools....

High-Density, Hot-Swap Rectifiers

April 30, 2001 6:15 am | Comments

The new Meridian RMP Series from UNIPOWER Telecom produces up to 200 amperes at 27.2 V DC or 100 amperes at 54.4 V DC from a 23-inch shelf housing up to four rectifier modules. The individual rectifier modules each produce 50 amps at 27.2 V or 25 amps at 64.4 V with a power density of 6.4 watts per cubic inch....

Surface Mount Voltage Controlled Oscillator

April 30, 2001 6:15 am | Comments

ILSI America has reduced the ceramic package size of its surface mount TCVCXO 1707 Series oscillators to 5 × 3.2 mm. The oscillator covers a frequency range of 12.6 to 19.8 MHz with a stability of ± 2.5 ppm over an operating temperature range of – 20 ° C to 75 ° C. Pullability is 5 - 15 ppm with a control voltage of 1....

Advertisement

Analog Data Capture Module

April 30, 2001 6:15 am | Comments

TDL Technology announced the release of their Model ADC-405, a new analog data capture module designed for field data collection using a laptop or notebook host computer. It features a 12-bit output word at a maximum sampling rate of 69 kHz. The built-in rechargeable batteries provide power line independence during operation....

Thermally Conductive Epoxy Adhesive

April 30, 2001 6:15 am | Comments

TRA-BOND 8-2 from Tra-Con offers a combination of strength and thermal conductivity with properties down to – 90 ° C. This epoxy can be provided in a custom bipax or pre-mixed and frozen. TRA-BOND 8-2 also has the ability to bond difficult-to-bond metals, such as gold, silver, brass, and solder....

Coaxial Relay Module

April 30, 2001 6:15 am | Comments

The Model 7000 coaxial relay module form Matrix Systems provides switching continuity over a wide range of critical and severe environmental conditions. Features include 2 to 24 throws, DC up to 800 MHz depending on the number of throws, continuous shield continuity, and switchpoints that are individually field replaceable....

DC/DC Power Modules

April 30, 2001 6:15 am | Comments

The latest high current DC/DC power modules from Ericsson Microelectronics extend the PKL 4000 family with models designed for the convergent telecommunications marketplace. The 1.8 V, 60 A PKL 4118 PIT and 1.8 V, 50 A PKL 4918 PIT models offer high efficiency (87% at 60 A), and at 37.2 W/in 3 , these converters offer double the power density of other half-brick modules....

Surface Mount Oscillator Features Reduced Size

April 30, 2001 6:15 am | Comments

Fox Electronics has introduced a new surface mount oscillator that features package size to meet the demand created by severely reduced space restrictions for the wireless and portable markets. The new Fox F500 Series SMD oscillator measures 5 × 3.2 mm with a low profile of 1.4 mm, making it ideal for use in micro-miniaturized versions of wireless and portable electronic devices....

Advertisement

Extended Access Screw Terminal

April 30, 2001 6:15 am | Comments

Keystone Electronics offers a new line of elongated screw terminals for those applications that require connections to be made high above the PC board. Typical applications are power supplies, multi-board stacks, and where termination must be made outside the product. The extra height makes access to this screw terminal easier than conventional screw terminals, a particular advantage in high density applications....

Thermally Conductive Gap Fillers

April 30, 2001 6:15 am | Comments

Stockwell Rubber Company announced the availability of die cut parts from two newly developed thermally conductive gap filler materials. These two new compounds provide an effective path between heat sources and heat sinks in a variety of electronic and telecommunications applications. TC2000 Gap Filler provides a means of making intimate contact between components and heat sinks where a large gap is generated in assembly design or where ...

Miniature Radial Multi-Position Switch

April 30, 2001 6:15 am | Comments

Dow-Key Microwave (a subsidiary of Dover Corp.) recently released a Micro Miniature Radial Multi-position (SP3T to SP6T) Switch designated P/N 567-5308. The switch performs up to 18 GHz. DC characteristics include 24 - 32 V DC (28 V DC nominal operating current is 130 mA typical @ 20 ° C). The switch is equipped with an actuator, providing a "normally open" mode of operation....

Automated Design Tool for Configurable Power Supplies

April 30, 2001 6:15 am | Comments

Vicor introduced VCAD (Vicor Configurable Automated Design), an automated design tool that gives power designers more flexibility and real-time control over the design and manufacture of power solutions. This step toward true mass customization facilitates a rapid response to unique applications by giving designers the ability to explore a variety of solutions that meet their unique electrical and mechanical requirements....

TOPICS:

Surface Mount Crystal Oscillators

April 30, 2001 6:15 am | Comments

PTI (Piezo Technology, Inc.) has introduced a broad array of crystal-based oscillators directed at the wireless systems infrastructure marketplace. The XO5080 OCXO family targets those applications where the requirements can only be met with a crystal based oven-controlled oscillator (OCXO) and addresses the user requirement for lower life cycle costs....

Integrated GaAs pHEMT MMIC Receiver

April 30, 2001 6:15 am | Comments

Mimix Broadband announced the introduction of a totally integrated gallium arsenide (GaAs) monolithic microwave integrated circuit (MMIC) receiver on a single chip. This device is a three stage low noise amplifier (LNA) followed by an image reject fundamental mixer using Lange couplers to optimize bandwidth....

Linear Power Amplifier for 802.11b

April 30, 2001 6:15 am | Comments

Maxim Integrated Products introduced their linear power amplifier (PA) designed for 2.4 GHz WLAN applications. The MAX2242 PA is packaged in the ultra-small 3 3 4 ultra-chip-scale package (UCSP) measuring 1.5 mm 3 2.0 mm, making it ideal for portable WLAN radios built in small PC card and Compact flash card form factors....

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading