Advertisement
Product Releases
Subscribe to Wireless Design and Development

Bluetooth Baseband Controller

January 29, 2002 3:56 am | Comments

Ericsson Microelectronics has expanded its modular Bluetooth offering with the launch of a new baseband controller chip. Pre-qualified to Bluetooth version 1.1, the PBM 990 90 will assist OEMs in the rapid development of Bluetooth products including mobile phones, PDAs and accessories. The new controller is based upon a scalable Ericsson Bluetooth 1....

RF SAW Filters

January 29, 2002 3:56 am | Comments

Toshiba America Electronic Components (TAEC) introduced a small RF surface acoustic wave (SAW) filters. By employing chip scale packaging (CSP), Toshiba Corp. achieved a 40 percent size reduction and 60 percent weight reduction as compared to conventional RF SAW filters. In addition, the devices offer the same electrical performance as SAW Filters offered in larger packaging, giving designers a well-rounded solution for smaller form factor ...

MMIC Receiver for High Index Modulation Schemes

January 29, 2002 3:56 am | Comments

Mimix Broadband introduced a gallium arsenide (GaAs) monolithic microwave integrated circuit (MMIC) receiver comprised of a three stage low noise amplifier (LNA) followed by an image reject fundamental resistive high electron mobility transistor (HEMT) mixer. The image reject mixer removes the need for a bandpass filter after the LNA to remove thermal noise at the image frequency....

Advertisement

Power Distribution Connector System

January 29, 2002 3:56 am | Comments

FCI Electronics announced the latest addition to its PwrBlade( Power Distribution Connector System. The R/A press fit receptacle complements the existing PwrBlade( product line. Press fit tails fit existing solder tail mounting hole diameter and pattern. FCI offers press fit tooling to easily install the connector to the board....

Low Jitter Frequency Translator

January 29, 2002 3:56 am | Comments

Vectron International (VI) has introduced a new low jitter frequency translator designed to simplify a wide variety of frequency translation and clock smoothing applications. The FX-500 is a complete crystal-based frequency translator, providing superior stability and jitter performance. The new product offers a flexible solution that reduces design time, increases circuit reliability and reduces board space....

Miniature Directional Couplers for Medium Power Applications

January 29, 2002 3:56 am | Comments

MECA offers a series of miniature, 50-watt, stripline directional couplers ideal for applications between 500 MHz and 18 GHz where precise power monitoring, external leveling, signal mixing or swept transmission and reflection measurements are necessary. Nominal coupling values of 10, 20 and 30 dB are standard....

Lithium Ion Battery Charge Controller

January 29, 2002 3:56 am | Comments

ON Semiconductor has introduced a single-cell lithium-ion (Li) battery charge controller that boasts a stand-by current of 0.5 microamps (?A). Designed for use in a wide variety of portable electronic devices, the NCP1800 delivers a smaller footprint, reduced part count and extended battery life required by today's highly competitive wireless and portable handheld product manufacturers....

TOPICS:

Crystal for Wireless and Handheld Applications

January 29, 2002 3:56 am | Comments

Fox Electronics now offers the FX325B, a small crystal available for wireless, portable, handheld, and other applications where size and weight are critical. The FX325B measures 3.2 mm × 2.5 mm × 0.8 mm. Typical devices that will benefit from this new miniature crystal include Bluetooth, PCMCIA Cards, PDAs, Laptops, and a variety of other portable and handheld devices....

Advertisement

Zero Bias Schottky Detectors

January 29, 2002 3:56 am | Comments

Model 203S Zero Bias Schottky detector operates over the entire frequency band of 10 MHz - 40 GHz. Frequency response: ± 0.5 dB to 20 GHz, ± 0.8 dB to 26.5 GHz, and ± 1.5 dB to 40 GHz. Maximum VSWR over these same frequency bands is 1.35, 1.5, and 2.0 respectively. Standard input connector is 2....

Resettable Protection for Li-Ion and Li-Polymer Battery Packs

January 29, 2002 3:56 am | Comments

Tyco Electronics Corporation announced a new addition to its line of PolySwitch® PPTC (polymeric positive temperature coefficient) resettbale strap devices, from its Raychem Circuit Protection Division. Providing both overcurrent and overtemperature protection, the VLP270 device is designed to accommodate the increasing demands for longer run time of cellular phones, notebook computers, PDAs, and other portable electronics....

TOPICS:

Dual Quarter-Brick DC/DC Converter

January 29, 2002 3:56 am | Comments

di/dt introduced the QD48 family of DC/DC converters, the industry's first dual quarter-bricks with independently regulated outputs. The 3.3 V/5 V version simultaneously delivers 15A at 3.3 V and 10 A at 5 V (100 watts). The QD family is available in any combination of outputs from 5 V down to 1....

In-Line Waveguide LNA

January 29, 2002 3:56 am | Comments

The models SLK-22-3I and SLKa-22-4I low noise amplifiers are capable of covering full waveguide bandwidth of 18 to 26 GHz and 26.5 to 40 GHz respectively. The in-line construction makes it easier to integrate these LNAs into systems where space is tight. Both LNAs have 22 dB (typically) of gain and 3 dB noise figure for K-band and 4 dB noise figure for Ka-band....

Vector Signal Generator

January 29, 2002 3:56 am | Comments

Celerity Systems, a division of L-3 Communications, introduced the second generation CS2010 Vector Signal Generator (VSG), updated to meet the needs of developers and manufacturers of cutting edge wireless systems. Performance advancements include a new graphical user interface that maximizes ease of use in both production and R&D applications....

OEM Transmitter

January 29, 2002 3:56 am | Comments

Two styles of compact transmitters have been announced as additions to the popular Linx OEM product line. The units feature rounded, cosmetically attractive packaging and are more compact than the current handheld transmitter. Both units are ideal for general-purpose remote-control and command applications....

Wire Wound Ferrite Chip Inductors

January 29, 2002 3:56 am | Comments

Frontier Electronics now provides a new solution to an old problem; SMD Molded Wire Wound Ferrite Chip Inductors in place of the very popular axial leaded inductors for low to mid frequency signal devices such as computers and communication products. Frontier's model CF453232 (1812-dimensions are 4....

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading