Advertisement
Product Releases
Subscribe to Wireless Design and Development

Sensor for Magnetic Three-Axis Solution

November 29, 2001 8:38 am | Comments

Honeywell Solid State Electronics Center introduced a robust, miniature, three-axis magnetic sensing solution for next-generation applications. To compliment its ultra small HMC1052 two-axis sensor, Honeywell designed the HMC1051Z, a single-axis sensor that when used together, offer a miniature, low power, low field three-axis magnetic sensing solution....

Digital Signal Processor for 3G Base Stations

November 29, 2001 8:38 am | Wireless Design & Development | Comments

Analog Devices unveiled a new DSP for 3G (Third Generation Cellular) base stations equipped with Layer 1 software that together reduce baseband system costs of 3G telecommunications infrastructure equipment by up to 50 percent. ADI's ADSP-TS101S TigerSHARC®DSP is equipped to address manufacturer's needs for flexibility, high performance, reduced bill of materials cost and added capacity than the traditional hardware approach that relies ...

SiGe Transistor

November 29, 2001 8:38 am | Comments

California Eastern Laboratories (CEL) has announced the availability of a new Silicon Germanium low noise transistor from NEC. Ideal for use as a first stage LNA or oscillator in 1.6, 1.9, 2.4, 3.5, or 5.8 GHz designs, the NESG2030M04 delivers great performance in an ultraminiature package. Specification features (@ 2 GHz) include low noise of 0....

Advertisement

26 GHz Coaxial Switch

November 29, 2001 8:38 am | Comments

Dow-Key Microwave's newest product, the 26 GHz SP6T switch (p/N 561K - 430803E), offers internal 50 Ω termination. DC characteristics include 24 -32 V DC (28 V DC nominal). Operating current is 180 mA typical @ 20°C operation. Equipped with a latching actuator, this device switches in 15 ms (maximum)....

Multi-Octave Band Reject Yig Filter

November 29, 2001 8:38 am | Comments

Omniyig's newest addition to the band reject filter line is Model NBR.MR2224, a multi-octave band reject filter. This unit tunes the frequency range of 0.5 to 2.0 GHz. The rejection bandwidth is 20 dB at 4 MHz minimum. The rejection bandwidth is 30 MHz at 30 dB with an insertion loss of typically 1....

Surface Mount Chip Capacitors

November 29, 2001 8:38 am | Comments

The new PXA series from United Chemi-Con are surface mount chip capacitors that incorporate a solid functional polymer electrolyte. These capacitors feature an ultra low ESR, low impedance and high ripple current capability. The design incorporates heavy-duty materials that can withstand two reflow soldering cycles when exposed to lead-free alloy melting points between 210°C and 230°C....

Low Profile Connector

November 29, 2001 8:38 am | Comments

The new Series PB connector, recently introduced by JST, provides a cost-effective way of mounting lithium button batteries typiccally used in mobile phones. Hand soldering is eliminated and embossed tape packaging provides further production efficiency via pick and place machines. The capability to remove the battery offers ease of replacement and enhances the device's ecological benefits....

RF Modules for Transfer of Analog or Digital Data

November 29, 2001 8:38 am | Comments

The third generation of the HP series is available in styles which offer compatibility with previous HP-Series modules. Like its predecessors, the HP-3 is designed for the cost-effective, high-performance wireless transfer of analog or digital data in the 902 - 928 MHz band. In the US, this band is ideal for a wide variety of analog or digital wireless applications including data links, process and status control, home and industrial automa...

Advertisement

Frequency Range of Crystal Oscillators Expanded

November 29, 2001 8:38 am | Comments

Fox Electronics has increased the frequency range of its popular F4100 Series crystal oscillators to 156.25 MHz, from the industry standard 125 MHz. The new oscillator is ideal for Fiber Channel, SONET, and ATM applications, as well as microprocessor and micro-controller applications, all of which constantly demand increased speeds and better noise characteristics....

PLL Synthesizer Module

November 29, 2001 8:38 am | Comments

Z-Communications released a new phase-locked loop (PLL) module, using advanced chip scale packaging technology, geared for the demanding PCS Basestation market. The PLL1810A covers the 1780 to 1840 MHz frequency range with a 50 KHz step size while delivering phase noise performance. The PLL offers a clean spectral signal of -101 dBc at 10 kHz offset and -123 dBc at 100 kHz offset or, equivalently, a RMS phase error of less than 2....

Surface Launch PCB-Mounted BNC Jack

November 29, 2001 8:38 am | Comments

Trompeter announced the introduction of a new surface launch circuit board BNC jack connector, the UCBJ20F. The product was designed for high coaxial interconnect density motherboard applications which require very low return loss at higher frequencies over a wide bandwidth and temperature variation....

Tight Tolerance Chip Inductor

November 29, 2001 8:38 am | Comments

TOKO America announces the availability of their LLP1005FH thick film chip inductor with a 0402 footprint (1.0 mm × 0.5 mm) and a low profile of 0.4mm. Manufactured with a proprietary ceramic material and photolithographic process, these tight inductance tolerance chip inductors offer reliability and performance to a variety of mobile communication platforms....

Integrated Power Monitors

November 29, 2001 8:38 am | Comments

Decibel Products, an Allen Telecom company, released of its next generation Integrated Power Monitor, model DB8822. This Integrated Alarm Monitor is a low-cost sensor and display monitor for SWR and power on a single transmitter or antenna and combines RF sensing, display, monitoring functions and remote access into one compact package....

Aluminum Alloy Produces Thin Lithium Ion Rechargeable Cell

November 29, 2001 8:38 am | Comments

Thin Lithium Ion rechargeable cells have been developed by Hitachi Maxell, Ltd., parent of Maxell Corporation of America, by using a special aluminum alloy to produce an operating cell with a thickness of less than 3 mm. The cells, designated model ICS283465G, utilize Maxell's prismatic configuration and are intended principally for cellular telephone applications....

Enclosures Provide Additional Depth Without Adding Width or Height

November 29, 2001 8:38 am | Comments

Hoffman has introduced 10-inch deep CONCEPT® Wall-mount Enclosures. Available in 20 different sizes, the enclosures complete the full line of 8-, 10-, 12-, and 16-inch standard product depths, eliminating the need to specify extra-wide or extra-tall enclosures when equipment requires more than an 8 depth....

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading