Advertisement
Product Releases
Subscribe to Wireless Design and Development

Hex Flange Nuts

July 31, 2001 4:30 am | Comments

Micro Plastics has added a new product to their present line of Universal Nuts. These new nylon "Hex Flange Nuts" can be used where additional contact area is required, and can even eliminate the use of a washer in some applications. They are offered in two sizes to accommodate a 1032 and 1/4-20 screw....

Synchronous Clock Generators

July 31, 2001 4:30 am | Comments

Connor-Winfield introduces two new Synchronous Clock Generators — the SCG2000 and SCG2500. Both are mixed-signal phase locked loops generating LV CMOS outputs from a fundamental frequency, low jitter, voltage controlled, crystal oscillator. They provide high precision frequency translation for telecommunication applications....

Ultra-Small Power Inductors

July 31, 2001 4:30 am | Comments

Pulse announces its new, lowest-profile 1.8mm-high surface mount (SMT) power inductor for use with micro power and handheld devices. In addition to being ultra-thin, the micro power inductors feature an extremely small footprint and a closed magnetic field due to their toroidal construction, which ensures low electromagnetic interference (EMI)....

Advertisement

Integrated Components Filter Low Or High Frequencies

July 31, 2001 4:30 am | Comments

KOA Speer Electronics introduces a full line of standard and enhanced T Filter networks for suppression of EMI/RFI at low and high frequencies. KOA T filter networks combine exceptional filtering capabilities, high stability and high reliability with a unique symmetrical design that allows for the filtering of bi-directional signals....

16-bit Digital Signal Processors

July 31, 2001 4:30 am | Comments

Analog Devices revealed he new Blackfin™ family of 16-bit digital signal processors (DSPs) and the world's first product to integrate the high-performance Micro Signal Architecture jointly developed with Intel Corporation. Designed for telecommunications and a range of Internet appliances, this new Blackfin™ DSP shortens software and hardware development time through a programmer-friendly architecture and on-chip interfaces to ADI's...

RF Packaging

July 31, 2001 4:30 am | Comments

Palomar Technologies introduces the HotRail™ RFA (Radio Frequency Assembly) Cell for automated assembly of RF power amplifier components. This fully automatic, in-line, multi-chip, high-accuracy (± 10-12 micron) system provides void free assembly and programmable steady heat control for eutectic die attach....

Power Inductor

July 31, 2001 4:30 am | Comments

Pulse announces a new surface mount (SMT) flat-coil power inductor for high-current applications used in DC/DC converters for high-speed desktop computers, notebook computers, servers, and power supply modules. The power inductor provides a low profile (6 mm or 0.236 inches max.) compact and robust design for easy SMT mounting....

Low Noise Amplifier with Integrated Bypass Switch

July 31, 2001 4:30 am | Comments

Motorola's Semiconductor Products Sector has announced the introduction of its first SiGe:C standard product for the merchant market. Motorola is introducing a SiGe:C low noise amplifier (LNA) with an on-chip bypass switch. This device utilizes the SiGe:C module of Motorola's advanced 0.35 micron RF BiCMOS process....

Advertisement

PMC Module

July 30, 2001 4:33 am | Comments

Ixthos announces a user-programmable and highly flexible PMC card that allows the designer to uniquely configure the module to meet virtually any I/O need for telecommunications applications and for increasing the computing performance of CHAMP-based DSP sub-systems. The new PMC GPIO-1™ provides time-critical wireless and wireline telecommunications applications with additional, high performance, front-end processing — without the...

D-Connector Fabric/Foil Shielding

July 30, 2001 4:33 am | Comments

Chomerics now manufactures SOFT-SHIELD® 4000 fabric/foil over foam gaskets to provide EMI shielding of standard D-connector interfaces. SOFT-SHIELD 4000 gaskets are available to fit 9, 15, 25, 37 and 50 pin D-connector sizes. The 4000 series provides a choice of UL 94 V-0 or UL 94 HB flammability-rated materials....

MMDS Channel Bandpass Filter

July 30, 2001 4:33 am | Comments

Model 4977(6)-(CHANNEL#) bandpass filter, weighs less than 4 pounds and is available for any MMDS channel. It is used to prevent out-of-channel emission from MMDS channel transmitters, to preselect and improve MMDS point receptions or for other interface situations. High Q waveguide resonators provide an insertion loss less than 0....

High Pass Filters

July 30, 2001 4:33 am | Comments

A Series of high pass filters includes a broadband image cleanup filter. This configuration has a low loss of 2.0 dba of loss less than 1.0db of flatness from 5000 to 11500 Mhz. Rejection for this filter is greater than 50 db from DC to 4200 Mhz. Inputs and outputs are SMA-F and the overall size of the unit is 1....

Snap-In Leaf Contacts

July 30, 2001 4:33 am | Comments

Keystone Electronics offers a new line for snap-in mounting of AA size batteries directly to the PC board. Those economical and reliable contacts offer unique spring tension providing low contact resistance while adjusting to variation in battery length. The new contacts are available in either leaf spring (negative, Part #590) or button (positive, Part # 596)....

RGB Surface Mount LED Pixels

July 30, 2001 4:33 am | Comments

Lumex is announcing its new line of point-source red-green-blue (RGB) surface mount LED pixels. These unique devices, which appear as full-color point sources to the human eye, are able to generate any mixture of the three primary colors. They are ideal for high-end indoor and outdoor signage, full color video indoor display screens, and all types of high-resolution full color displays....

Screw Mount Cable Tie Holder

July 30, 2001 4:33 am | Comments

Micro Plastics has added a new product to their present line of Cable Ties and Mounting Hardware. This "Screw Mount Cable Tie Holder" is molded in a natural color Nylon 6/6 material and offers a two way entry that is secured with a 1/4-20 or M-6 mounting screw. Additional cable tie mounting hardware is available; Fin Clip Push Mounts, Clip Mounts, Screw Tabs and Cradle Mounts....

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading