Advertisement
Product Releases
Subscribe to Wireless Design and Development

High Power Transfer Switch With 7/16 Connector

April 6, 2001 5:21 am | Comments

Dow-Key Microwave (a subsidiary of Dover Corp.) introduced an Ultra-High Power Transfer Switch. The high power handling capabilities, coupled with reduced size and weight, eliminates the need for the large waveguide switches used in high power L-Band applications. Designed for switchblade coaxial systems in the DC to 2 GHz range, the switch features high kilowatt power handling capability....

SMT Connectors

April 6, 2001 5:21 am | Comments

To compliment the existing range of Harwin's High Reliability sub-miniature "Datamate" connectors, a Male Crimp Series designed for cable-to-cable applications has been introduced. These dual row versions utilize the series' contact technology, providing signal transmission without loss of data, 3 amps per contact, shock, heat and vibration resistance, while providing additional strain relief with Friction or Locking Latches....

Terminal Blocks for RCB, Rail, and Panel Mounting

April 6, 2001 5:21 am | Comments

AMERICOR Electronics announces its new complete line of screw and screwless Terminal Blocks with printed circuit, rail and panel mounting options. All terminal block configurations meet IEC standards and specifications. Types include Euro style printed circuit configurations with conventional and de-pluggable options, double-deck PC connectors, surface mount blocks with solder tabs, fused rail mount blocks, plug and socket sets, transformer...

Advertisement

International Series of 100 VA Power Transformers

April 6, 2001 5:21 am | Comments

Prem Magnetics introduced the SPW-1200 series of internationally-approved 10.0 VA printed circuit board power transformers. The series also includes 2.5, 5.0, 6.0, 10.0, 12.0, 20.0, and 24.0 VA power transformers. Safety agency approvals include VDE 0805 (EN 60950), UL #1950, UL #1446, UL 1585 Class II & III, CSA 22....

Indoor Power Divider for use at 2.3 - 2.5 GHz

April 6, 2001 5:21 am | Comments

Kathrein's Scala Division announced the availability of its KS1009 indoor power divider for use at 2.3 - 2.5 GHz. The KS1009 provides an 8-port split for use in distributed in-building RF systems for W-LAN and other broadband divider/combiner applications. The device features low insertion loss, greater than 20 dB port to port isolation and good impedance match at all ports....

Single Board Computer for Development of Test Instruments

April 6, 2001 5:21 am | Comments

Tidal Engineering recently announced the addition of the SBC488A to its embedded IEEE 488 product family. This programmable single board computer (SBC) boasts a fully integrated C development environment and an IEEE 488 General Purpose Interface Bus (GPIB) controller to provide OEM's with flexible rapid instrument development capabilities withou the associated time and expense of developing a GPIB controller for their products....

LCD Backlight Driver for TFT Displays

April 6, 2001 5:21 am | Comments

Taiyo Yuden's Power Systems Group announced the Model LS650, the latest addition to its line of compact cold-cathode fluorescent tube (CCFT) inverters for brightness control in LCD backlighting applications. Especially recommended for use with the NEC 6.5 TFT display, the LS650's rigid construction and compact, low-profile design (105 mm L × 25 mm W × 10 mm H) helps manufacturers of industrial instruments and test and measurement eq...

512 Megabyte Memory Card

April 6, 2001 5:21 am | Comments

SanDisk introduced a 512 megabyte (MB) CompactFlash™ (CF) memory card. The standard CF Type I card features high capacity. The company also introduced a high-capacity 128MB SmartMedia memory card. SanDisk, which also added 256MB and 384MB standard CompactFlash cards to its product lineup, is targeting the new high-capacity cards primarily at the new three and four megapixel, high-resolution digital cameras and Internet music players....

Advertisement

Ceramic Packages for Applications From DC to 50 GHz

April 6, 2001 5:21 am | Comments

StratEdge's SE50 line of standard off-the-shelf designs handle packages operating between DC and 50 GHz. These commercial packages can withstand the heavy electrical and thermal demands required to protect the broadband and power MMIC amplifiers needed for LMDS, point-to-point, and point-to-multipoint technologies....

100 Watt, 0.3 - 30 MHz Power Amplifier

April 6, 2001 5:21 am | Comments

LCF Enterprises has developed an economically priced, high performance 100 Watt RF Power Amplifier that covers the frequency range from 0.3 MHz to 30 MHz and 45 dB of gain. Features include automatic current limiting, forced-air cooling, current meter, over-current, and thermal protection. The amplifier is also available as a DC Module in a small, high efficiency package....

Electronic Grade Foam Protects Components

April 6, 2001 5:21 am | Comments

E-A-R Specialty Composites has developed a non-silicone formulation if its highly damped, slow-recovery CONFOR® foam, specifically to address the shock protection needs of today's miniaturized computers, hand-held electronics, and personal digital assistants. Used as shock pads, spacers, or snubbers, energy-absorbent CONFOR CF-45E foam protects delicate components from shock and vibration, with no silicone off-gassing....

Wireless Platform Increases 3G Radio Channel Density

April 6, 2001 5:21 am | Comments

Blue Wave Systems launched the ComStruct™ CPCI/C6800, which will enable third generation (3G) developers to realize a greater than four times increase in base station transceiver (BTS) channel density, thereby enhancing network capacity and accelerating 3G rollout. The Commercial-Off-The-Shelf CompactPCI® platform is based on the recently launched TMS320C6415 and TMS320C6416 digital signal processors (DSPs) from Texas Instruments Inc...

Lithium Batteries For Compact Designs

April 6, 2001 5:21 am | Comments

To meet the growing demand for smaller, lighter and high capacity rechargeable battery solutions, Toshiba America Electronic Components(TAEC) announced the addition of Advanced Lithium Batteries (ALB) to its line-up of rechargeable batteries. Traditionally, conventional battery structure has mandated that batteries maintain a thickness of no less than 5 to 6 mm....

Family of RF ICs Customized for Bluetooth

April 6, 2001 5:21 am | Comments

Toshiba America Electronic Components (TAEC) announced that it has expanded its family of RF integrated circuit (IC) packages called Cell Packs. These new Cell Packs offer designers a quick and easy way to implement a variety of important functions required for mobile communications products and Bluetooth™-enabled devices....

Power Divider/Combiners

April 6, 2001 5:21 am | Comments

MECA recently introduced the "V-Line" family of isolated power divider/combiner. These dual-band (0.800 - 2.000 GHz) dividers are ideally suited for low-cost, high-performance applications with shipment from stock to meet JIT requirements. The 802-2-1.400 (2-way, SMA-Female) measures 1....

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading