Advertisement
Product Releases
Subscribe to Wireless Design and Development

Coaxial Loads

April 10, 2001 10:11 am | Comments

MECA offers low power, 50 ohm loads precisely designed for cost effective solutions. The 462-1F3 is an SMA-male coaxial termination ideally suited for low power applications dissipating 1 watt average power (250 watts peak) with typical VSWR of 1.05:1 to 3 GHz. The 401-1F3 is an N-male coaxial termination that dissipates 2 watts average power (1 kW peak) with typical VSWR of 1....

Rework System

April 10, 2001 10:10 am | Comments

M-9100AV rework system from Manncorp automatically calculates alignment, places the component, and solders it — all while requiring no more operator involvement than a few clicks of the mouse. M-9100AV, unlike split-vision systems, requires minimal training and no calibration. Nor does it rely on the operator's eyesight or his ability to visually align components — the system's software does all the work....

Surface Mount LED

April 10, 2001 10:07 am | Comments

Lumex introduced a new series of right-angle surface mount technology (SMT) light-emitting diodes (LEDs) that solve the off-the-board height problem traditionally associated with this type of device. Lumex's new SMF-LX2432 Series features a 1.4 mm (0.055 inch) distance between the light center of the LED and the top of the circuit board, as opposed to the more common 0....

Advertisement

Small Computer System Interface Connectors

April 10, 2001 10:05 am | Comments

Kycon recently announced the release of the K77 series of Small Computer System Interface (SCSI) connectors, one of the industry's commonly used input/output interfaces. The K77 series offers the standard SCSI connector in 50 pin (SCSI II) and 68 pin (SCSI III) designs. The stamped pins are phosphor bronze for superior contact retention, and the body is PBT thermoplastic, UL94V-0 Rated....

Tapped Filter Networks For EMI/RFI Suppression

April 10, 2001 10:03 am | Comments

Tapped filter networks for the suppression of EMI/RFI noised are now available from KOA Speer Electronics. These components are designed to filter out the high frequency content of digital signals and are commonly used in I/O ports and other high frequency/high speed applications. The standard KOA Speer LFA series networks in a low profile, 20-pin QSOP style, can replace 16 individual discrete components....

Coin Cell Holders

April 10, 2001 10:01 am | Comments

Keystone Electronics offers a new holder for quick and easy installation of 2032 lithium coin cells in high density applications. The dual-spring contacts are polarized to assure proper installation. These new holders retain cells securely under shock and vibration. The surface mount version is available in bulk (Part #1060) and on tape and reel (Part #1060TR) and is compatible with most vacuum and mechanical pick and place assembly syste...

Connectivity Tester

April 10, 2001 9:59 am | Comments

The NetTool™ Connectivity Tester combines cable, network, and PC configuration testing in a palm-sized tool. It identifies a jack as Ethernet, Phone, Token Ring, or inactive and checks link pulse for speed, polarity, duplex, level information, and receive pair. It resolves complex PC network configuration issues such as IP address, default getaway, and email and web servers, while showing key network resources used by that PC such as se...

Surface Mount Resistors

April 10, 2001 9:58 am | Comments

Providing manufacturers with a way to restart stalled production lines caused by long lead times for MELF type devices, resistor manufacturer IRC is now offering low-profile surface mount cylindrical resistors. Designated the MM Series, these cylindrical power resistors provide component engineers with drop-in replacements for MELF devices....

Advertisement

USB Medium Access Controller

April 10, 2001 9:56 am | Comments

Intersil announced its Medium Access Controller (MAC) that reduces Bill-of-Materials (BOM) costs and features a USB interface for embedded WLAN applications as well as stand-alone external WLAN modules. BOM savings are achieved by replacing expensive, large footprint flash memory with a smaller Electrically Erasable Programmable Read-only Memory (E PROM)....

Crystal For Data Transmission

April 10, 2001 9:55 am | Comments

International Crystal Manufacturing has released a crystal product intended for critical data transmission applications. The LFN1000 series crystal is manufactured in the TO-5 (HC-35) package and is also good for use in microwave applications. This product offers a range from 10 to 160 MHz and is specified at series resonance and optimal temperatures of 25 ° C or 75 ° C....

Junction Tee and Cable System

April 10, 2001 9:53 am | Comments

Interlink BT has announced the Junction, Tee, and Cable System — a fully connectorized fieldbus system offering system-wide "plug-and-play" convenience. This allows rapid changeover to a connectorized network. System components include FOUNDATION Fieldbus™ junctions and cabling (standard and armored) and IP67 tees that feature standardized minifast ® connectors that streamline changeover and maintenance procedures....

Development Kit For FPGA Designers

April 10, 2001 9:51 am | Comments

Insight Electronics now offers a Virtex-E Development Kit that helps FPGA designers shorten the development cycle and meet their time-to-market requirements. The new kit provides a platform for prototyping and verifying designs based on Xilinx's Virtex-E family of FPGAs. The development kit includes a Virtex-E reference board based on either a 600K-gate or 300K-gate Virtex-E FPGA....

Surface Mount Inductors

April 10, 2001 9:49 am | Comments

Gowanda Electronics is introducing a new series of surface mount inductors. This new wire-wound "CC" series is designed with terminations which result in improved solderability and therefore easier and faster assembly, enhanced system performance, and greater system reliability. This series of surface mount inductors is targeted for use in RF applications in the electronics industry, especially for wireless and test and measuremen...

Power Amplifiers

April 10, 2001 8:38 am | Comments

Fujitsu Compound Semiconductor (FCSI) announces the expansion of their GaAs MMIC Power Amplifier product line. FCSI is introducing four new millimeter-wave, high power MMIC amplifier products covering the 17.5 to 31.5 GHz frequency band with output power ranging between 26 to 31 dBm. These new devices are designed for point-to-point or point-to-multipoint radio link and Local Multipoint Distribution System (LMDS) applications....

Delay Line Filter Assemblies

April 10, 2001 8:36 am | Comments

FSY Microwave has developed a line of Delay Line Filter Assemblies to be used in High Power Feed Forward Amplifier applications. These products are custom designed to OEM specifications. The FSY design uses proprietary techniques to achieve maximum delay in a minimum package size. The assemblies typically consist of a delay line filter with an integrated isolator and couplers....

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading