Advertisement
Product Releases
Subscribe to Wireless Design and Development

Bluetooth Radio Solution

February 22, 2001 4:34 am | Comments

Ericsson Microelectronics announces a complete Bluetooth radio solution for the growing CDMA cellular market. By incorporating this solution, manufacturers can significantly reduce time-to-market for CDMA mobile phones utilizing Bluetooth wireless technology. The PBA 313 04 Bluetooth radio is a complete transceiver, including all external components except antenna....

Testmate Cable Assemblies

February 22, 2001 3:59 am | Comments

Times Microwave Systems has recently introduced its line of flexible 50 Ohm Testmate cable assemblies. Designed for operation up to 18 GHz or 40 GHz, Testmate cables have a proprietary triple shielding system and several designs feature interchangeable connector heads. Testmate cable assemblies have low attenuation, long term electrical stability and are ruggedized for daily dependability in a wide range of applications including site/field...

Triaxial Connectors for Noise-Free Guarded Systems

February 22, 2001 3:59 am | Comments

Tru-Connector Corporations released a full line of triaxial connectors that are designed for applications requiring the removal of noise radiation or cross-talk and improvement of the signal-to-noise ratio over standard coaxial cabling systems. Tru-Connector Triax Connectors are designed for triaxial cables....

Advertisement

Flexible Electrical Conduit with EMI/RFI Shielding

February 22, 2001 3:59 am | Comments

Electri-Flex Company announces the availability of three types of flexible electrical conduits offering EMI/RFI (electromagnetic and radio frequency interference) shielding. These liquidtight conduits permit traditional wiring solutions in shielding applications, providing an alternative to specialized shielded cable assemblies....

Coaxial Ribbon Cable Assemblies Available With RF Connectors

February 22, 2001 3:59 am | Comments

Tyco Electronics announced the availability of coaxial ribbon cable assemblies. Coaxial ribbon cable assemblies consist of individual coaxial cables encased in a PVC jacket making up a standard flat ribbon cable configuration. Each coaxial lead has a solid conductor and foil shield with a drain wire....

RF Cable Assemblies

February 22, 2001 3:59 am | Comments

RF and Microwave cable assemblies are available to accommodate flexible, conformable, and semi-rigid cable groups. Semi-automated cutting, stripping and forming equipment assure repeatable, precise dimensions from low to high volume requirements. Statistical process controls (SPC) utilizing a WinSPC system ensure all critical dimensions are met....

Cable Load Assemblies

February 22, 2001 3:59 am | Comments

KDI/Triangle Corp.'s "Resistor Products Group" offers a wide selection of "Cable Load Assemblies," made with a choice of either Beryllium Oxide (BeO) or Aluminum Nitride (AlN) resistive elements. CW Power Levels range from 50 to 250 watts. These competitivly priced devices can be factory tuned for a VSWR as low as 1:04:1....

DC-DC Converter Module

February 21, 2001 11:04 am | Comments

The first selection of pre–defined modules in Vicor's new 24V input family of 2nd Generation high power density DC–DC converters is now available. These modules are designed for communications, process control, defense, and distributed power systems applications. All of the converters operate from 24V nominal input (with an input range of 18V to 36V) and have power densities up to 79W/cubic inch....

Advertisement

Miniature Voltage Controlled Oscillator

February 21, 2001 11:03 am | Comments

Microneics introduces another wide band ultra miniature VCO. The Model Number MW350-1155 covers 1700 - 2600 MHz with 0.5 - 15 V tuning (1700 - 2000 MHz with 0.5 - 5 V tuning) in a .350 square × 0.15 package. Supply is 5 Vcc @ 26 Ma. Phase Noise is – 115 dBc/Hz @ 100 kHz, – 90 dBc/Hz. Harmonics are below – 18dBc, pushing 5 MHz/V, pulling 4 MHz P-_, 12 dB return loss, modulation BW is 72 MHz, minimum 50 ohm source....

Low Impedance Balums

February 21, 2001 9:09 am | Comments

Anaren Microwave announced the introduction of three new high-performance low impedance Xinger baluns used by power amplifier designers worldwide. The new Xinger baluns are designed to be surface mounted by automatic assembly equipment onto a printed circuit board, eliminating the of custom fitting coaxial baluns....

Battery Adapter

February 21, 2001 9:09 am | Comments

iTECH (Intelligent Technologies LLC) announces the release of a "Type 3" battery adapter compatible with NiMH and lithium ion StarTac, StarTac Piggyback and Nextel i1000 batteries, designed to interface with the iTECH IQfive(r) battery maintenance systems. The adapter features a battery communication system that identifies battery chemistry and determines charge rates....

TOPICS:

Micro Leadless Package Sockets

February 21, 2001 9:09 am | Comments

Gryphics has released a family of low cost, high performance Micro Leadless Package Sockets, to be used for Device Development, Production Test, and Burn-in. The family consists of standard, off the shelf format of socket assemblies and replacement contact sets, with deliveries from stock for all JEDEC MO-220 compliant devices depending on volume....

Wireless Internet Access

February 21, 2001 9:09 am | Comments

The WinRouter 2050 overcomes line of sight restrictions by providing connectivity and access to "hidden nodes". The UC Wireless VINE( network, implements an "anypoint-to-multipoint" topology that can cover a large geographic area with no need for a backbone. It provides high data payload and self-configuring nodes for easy setup in the 2....

Slot Test Connector

February 21, 2001 9:09 am | Comments

Meritec's newest addition to the Test Connector family is the 242 position, 1 mm Slot Test Connector. It features a life cycle greater than 100,000, and was developed to eliminate many of the common problems associated with using a standard connector in a test application. When testing, the PCB is plugged in and out of the connector many times....

Right Angle AGP Connector

February 21, 2001 9:09 am | Comments

The AGP interface has been designed specifically for dedicated use in high performance graphic controllers. Following in the footsteps of Meritec's Right Angle PCI Connector, the Right Angle AGP Connector allows the addition of an AGP card to a system without adding extra height. Meritec's Right Angle AGP connector meets the performance requirements of the AGP Specification Rev 2....

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading