Advertisement
Product Releases
Subscribe to Wireless Design and Development

Micropower Step-Up DC-DC Converter

April 6, 2001 5:20 am | Comments

ON Semiconductor announced the availability of a DC-DC converter that extends battery usage in portable equipment powered by one or two battery packs. With an efficiency rating of 85 percent, the NCP1402 micropower Power Factor Modulator (PFM) Step-Up DC-DC converter has an output voltage of 1....

Monolithic Chip

April 6, 2001 5:20 am | Comments

Analog Devices Inc., announced the AD8302, the industry's first monolithic chip made to simultaneously detect both the gain and phase difference between two independent wireless signals up to 2.7GHz. The AD8302 represents Analog Devices' latest addition to its growing range of wireless RF/IF ICs for the cellular basestation market....

Multi-Chip Packages

April 6, 2001 5:20 am | Comments

White Electronic Designs' 8M x 64 and 8M x 72 synchronous DRAM multi-chip packages, designed to complement the PowerPC™ and other high-performance memory controllers, are now available in registered versions that enhance performance of bus speeds at 66MHz and 100MHz. The SDRAMs are each housed in a 219 plastic ball grid array package that saves 33-60% board space over a comparable discrete approach, and has a lower profile than other ...

Advertisement

Chip Capacitor

April 6, 2001 5:20 am | Comments

Taiyo Yuden, Inc. announces the release of a new Multilayer Chip Capacitor (MLCC) Array series that utilizes Taiyo Yuden's materials and miniaturization technologies to integrate the functionality of up to four individual chip capacitors into a single component. The new MLCC Arrays are available in 0603, 0805, or 1206 case sizes with X5R or Y5V temperature ratings, depending on the part....

Hybrid Combiners

April 6, 2001 5:20 am | Comments

The DB4398 hybrid combiners are specifically designed for use with Motorola's iDENSignalling Application System. Employing dual-junction isolators to typically yield greater than 75-dB transmitter-to-transmitter isolation, the convertible design permits variable combining for narrow frequency separations....

DC/DC Converters

April 6, 2001 5:20 am | Comments

DATEL's new BWR-5/3.3W Series mixed-voltage, dual-output (3.3 V and 5 V) DC/DC converters have many features including, individual 3.3V and 5V outputs, any combination of 3.3V load (to 7 Amps) and 5V load (to 6 Amps) to a total power of 33 watts, both outputs regulated with a single control loop, 12V (10-18V), 24V (18-36V), or 48V (36-75V) inputs, synchronous rectification delivers 88% efficiency and stable no-load operation, – 40 to 65...

IEC-Inlet Filters

April 6, 2001 5:20 am | Comments

Schaffner EMC, Inc., has introduced a new series of compact high-performance IEC-inlet filters. The FN-9221 Series combines high power with compact dimensions for use in a wide range of applications. The new series of filters also offers significant cost savings over traditional devices. FN-9221 Series Filters have a current rating of 1 to 10 A, operating voltage of 250VAC, 50/60 Hz, operating frequency of DC to 400Hz, and are IEC 950-com...

Thermally Conductive Electrical Insulating Long Pot Life Compound

April 6, 2001 5:20 am | Wireless Design & Development | Comments

The TRA-BOND 789-4 is a thermally conductive epoxy designed for bonding transistors, diodes, resistors integrated circuits and other heat sensitive components to circuit boards. The TRA-BOND 789-4 is a one-part adhesive sold in out syringes. This package allows you, the customer, the freedom to use small quantities on an as needed basis or to use this product in mass production....

Advertisement

2.4 GHz Spread Spectrum Transceiver

April 6, 2001 5:20 am | Comments

AeroComm Inc. announces the release of its complete line of LX 2.4 GHz frequency-hopping spread spectrum (FHSS) transceivers. Unlike radios designed from chipsets, LX transceivers are agency-approved, ready-to-use modules designed for rapid integration into larger volume OEM products. The LX family offers manufacturers a broad array of wireless capability, accompanied by comprehensive RF development tools and support....

Oscillator Crystals

April 6, 2001 5:20 am | Comments

International Crystal Manufacturing has been manufacturing standard and custom crystal products for 50 years. Those products, manufactured for wireless and microwave applications include hi-tech oscillator crystals. The high-tech oscillator crystals offer a range from 10 to 160 MHz and are specified at series resonance and optional temperatures of 25 ° C or 75 ° C, but can be manufactured to meet other values if the requirements a...

Antenna Circuit Board Material

April 6, 2001 5:20 am | Comments

Rogers Corporation has introduced a cost-effective printed circuit board material developed specifically for use in antenna applications. RO4232® material provides superior electrical and mechanical properties to commercial PTFE/woven glass laminates. A primary application of the material is expected to be printed circuit board antennas on base stations....

Dual Band Low Noise Amplifier/Mixer for Combined TDMA/GSM Handsets

April 6, 2001 5:20 am | Comments

New RF2492 IC Features Dual IF Outputs, LO Frequency Doubler, Adjustable LNA Bias Current and IIP3. RF Micro Devices, Inc., a provider of proprietary radio frequency integrated circuits (RFICs) for wireless communications applications, announced, at the 2001 Wireless Symposium, the availability of the RF2492 dual band LNA/mixer for the emerging TDMA/GSM handset market....

Suppression Components/Systems

April 6, 2001 5:20 am | Comments

Americor Electronics, Inc. announces its new line of EMI/RFI interface suppression components for systems designed to fix the problem at the source. These RFI components are custom designed for easy and cost-saving installation. AMERICOR offers complete system solutions, combing their RFI components with other components such as switches, terminal blocks, relays, power cords, etc....

Integrated Power Amplifier for GSM Base Stations

April 6, 2001 5:20 am | Comments

A new generation of integrated circuits (ICs) using Motorola's fourth generation high voltage LDMOS technology is now available for the wireless infrastructure market. The first product to be introduced is the MHVIC910HR2, a 10 watt, 26 volt integrated power amplifier (IPA) operating at a frequency band of 921-960 MHz....

CompactPCI Handles for Front Panel Express Program

April 6, 2001 5:20 am | Comments

Pentair Electronic Packaging has expanded its 10-day Front Panel Express Program, a quick ship service on a wide variety of modifiable front panels, to now include their new line of CompactPCI handles. In addition to standard or shielded 3U and 6U Eurocard front panels and PMC panels for PCI mezzanine boards, Front Panel Express will be available for Schroff® brand IE handles which are popular for CompactPCI, VME64X and other application...

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading