Advertisement
Product Releases
Subscribe to Wireless Design and Development

RFI Noise Filters For Terminal Applications

March 2, 2001 10:14 am | Comments

Schaffner EMC has introduces 26 single-phase chassis-mounting RFI noise filters. The FN series of filters can be applied to a wide range of industrial and commercial systems, and to digital equipment with RFI emission problems such as industrial motors, controllers, pollution monitors, scales, automotive test equipment, commercial communications systems, processing systems, robotic systems, and audio/video recording systems....

4-Way Power Divider

March 2, 2001 8:41 am | Comments

Anaren Microwave, a leader in wireless technology, today announced the introduction of the surface mount 4-Way 4A4305 Xinger® for use in the 1.5 - 2.5 GHz bandwidth. The 4A4305 is designed for signal distribution for DCS, PCS, 3G and W-LAN applications. The 4A4305 provides better performance and requires less real estate, than the typical approach of using three discrete two-way power dividers....

IrDA Transceiver Family

March 2, 2001 8:38 am | Comments

Vishay Intertechnology released three new additions to its MicroFace series of IrDA compliant transceivers. The expanded series now offers increased operating distance and varying power supply options, and it is optimized for use in space limited, power restricted products, including PDAs, cellular phones, pagers, and other handheld battery operated equipment....

Advertisement

155 dBc Intermod Jumper Cables

March 2, 2001 7:56 am | Comments

Spinner North America's new Corrugated Jumper Cable assemblies feature – 155 dBc intermod and a VSWR of 1.07:1 @ 900 MHz. Operable to 2.4 GHz with standard and superflex 1/4, 3/8, and 1/2 diameter cables. IP-68 rated for outdoor use. Straight and right angle, silver plated "N" or 7-16 connectors offered, with soldered inner and outer conductors and injection molded boots....

Base Station Lightning Protection

March 2, 2001 7:56 am | Comments

A selection of gas-filled tube and quarter wave type solutions for wireless base station lightning protection is now available from Spinner North America, a subsidiary of Spinner GmbH, Munich. These new devices are supplied in a variety of configurations, including bulkhead, pigtail, and in-line types with both "N" or "7 - 16" connectors....

DC Power Jack Cable Assemblies

March 2, 2001 7:56 am | Comments

Shogyo has reduced the outside dimensions of the jack enclosures for its in-line molded DC Power Jack Cable Assemblies with Strain Reliefs. The new, slim profiles complements the strain reliefs in optimizing OEM design flexibility. The space saving jack enclosure is circular, with an outside diameter of 10 mm....

Passive Component Testers

March 2, 2001 7:56 am | Comments

QuadTech announced that its new family of LCR meters and impedance measuring instruments have been approved for CE marking, which is required on all products shipped into the European Union. The family presently consists of the Model 1910 Inductance Analyzer and 1920 Precision LCR Meter. The 1900 series is a new generation of high-performance testers specifically designed for fast throughput in automated production testing of resistive, cap...

Circular Connector

March 2, 2001 7:56 am | Comments

Hirose has introduced the HR30 circular connector to its line, noting that as more electronic equipment moves outdoors, the requirement for waterproof connectors has dramatically increased. The HR30 is a push-pull latched circular connector designed to meet IP67, enabling it to withstand submersion for up to 30 minutes when mated....

Advertisement

External RAID Subsystem

March 2, 2001 5:54 am | Comments

Unison Information Systems announces the release of their new RAID I/O Flyer III, the external RAID subsystem. The RAID I/O Flyer III is based on the same technology as Unison's six-drive RAID I/O Flyer II and three-drive RAID I/o Flyer 3d Fault Tolerant RAID Subsystems. The RAID I/O Flyer III offers users an even higher performance and larger capacity than the previous subsystems....

EBX Compliant Single Board Computer

March 2, 2001 5:54 am | Comments

Arcom Control Systems announced the release of the SBC-Geode-GX1, designed specifically for high volume embedded applications where reliability, low power, and long term availability are a must. The SBC-Geode0GXM is the ideal solution for industries such as process automation, communications, transportation, environmental control, and others requiring a high performance single board computer....

High Power GaAs FET

March 2, 2001 5:46 am | Comments

Fujitsu Compound Semiconductor announces a new high power GaAs FET with an output of 240 W for use in the 2100 to 2200 frequency range. This device (FLL2400IU-2C) employs a push-pull design that offers ease of matching, greater consistency, and a broader bandwidth for high power amplifiers. This product is used for solid state, base-station, power amplifiers for W-CDMA and IMT 2000 Communication Systems applications....

Resettable Fuses

March 2, 2001 5:45 am | Comments

Bourns announced the expansion of its Multifuse® product line. The new products being launched include additions to various series. The MF-USMD family of SMT resettable fuses has a 1210 mils footprint. Bourns Multifuse Polymer PTC's offer overcurrent protection for a variety of applications, including motherboards, add-on cards, disk drives, peripherals and hand-held devices....

UHF Male Crimp Connector For LMR-400 Cable1

March 2, 2001 5:45 am | Comments

Times Microwave Systems recently announced the availability of its EZ-400-UM non-solder 'EZ' install Type-UHF male connector. The EZ-400-UM connector eliminates the need to solder the center conductor and braid which can cause overheating and melting of the cable dielectric. The center conductor slides into a silver plated spring finger contact pin and the outer braid is attached with a crimp-style attachment ring using standard ....

-155 dBc Intermod Jumper Cables

March 2, 2001 5:45 am | Comments

Spinner North America's new Corrugated Jumper Cable assemblies feature – 155 dBc intermod and a VSWR of 1.07:1 @ 900 MHz. Operable to 2.4 GHz with standard and superflex 1/4, 3/8, and 1/2 diameter cables. IP-68 rated for outdoor use. Straight and right angle, silver plated "N" or 7-16 connectors offered, with soldered inner and outer conductors and injection molded boots....

Surface Mount Modular Jacks In Tape And Reel

March 2, 2001 5:45 am | Comments

Kycon now offers surface mount modular jacks in tape and reel packaging. This fully shielded connector measure 0.463 in height. The GM-SMT2-S2 series is made from reflow compatible, high temperature thermoplastic and features positioning pegs to prevent misalignment of surface mount signal and true SMT ground tabs....

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading