Product Releases
Subscribe to Wireless Design and Development

RF Connectors

June 4, 2002 7:48 am | Comments

Coaxial Connector Interface      The 1.0/2.3 coaxial connector interface is an effective way to save space in electronic assemblies. Designed per CECC 2230 and DIN47247, this connector series is ideal for telecommunications applications, especially in high speed switching equipment operating at frequencies up to 4 GHz....

Linx Technologies

June 4, 2002 7:48 am | Comments

Development System      The MDEV-900-ES-XXX Wireless Development System contains the tools necessary to fully explore the capabilities of Linx' low cost ES series RF modules. The system is designed to speed evaluation and integration of the modules, which are capable of transferring serial data, or audio/analog content over distances of up to 1,000 ft....

Signal Technology - Wireless Group

June 4, 2002 7:48 am | Comments

Digital Radio Transceiver Modules      Signal Technology released a transceiver for 38 GHz Ultra High Capacity point-to-point and point-to-multipoint radio applications. This is a highly integrated TR assembly designed for next generation radio platforms utilizing 4 to 256 QAM modulation and passing data rates through 622 Mb/s....


Morgan Advanced Ceramics (MAC)

June 4, 2002 7:48 am | Comments

SiC Heaters      MAC's Silicon Carbide (SiC) heaters are ideal for semiconductor and electronics applications. These heaters are designed for use in process chambers where rapid heating to high temperature, with low contamination, is necessary.      Fabricated from high purity Chemical Vapor Deposition (CVD), the heaters have a high thermal conductivity and excellent thermal shock resistance....

Improving MMIC and RFIC Design Flows

May 8, 2002 8:21 am | Comments

New EDA technologies like Microwave Office 2002 and new foundry libraries help to streamline the development of RF and microwave ICs. By Ted Miracco, Applied Wave Research, Inc. In the 1990s, digital application specific integrated circuit (ASIC) designers experienced a process and productivity revolution that was brought about by advances in electronic design automation (EDA)....

Challenges of 2.5G to 10G Migration in Optical Networks

May 8, 2002 8:21 am | Comments

There are a number of challenges involved in moving from 2.5G to 10G networks, including cost of new equipment, technical issues, and the need to operate with existing infrastructure and preserving existing investment. Michael T. Moore, Cypress Semiconductor Over the years, the exponential growth of the Internet has been fuelled primarily by Internet Protocol (IP) traffic, creating an insatiable demand for bandwidth to carry this tra...

Base Station Testing Using a Spectrum Analyzer

May 8, 2002 8:20 am | Comments

The quality of service a wireless network operator can provide is dependent upon the performance of the base station. By Tom Rittenhouse, IFR Systems, Inc. The quality of service a wireless network operator can provide is heavily dependent upon the performance of the base station, a large portion of providing this quality depends upon the performance of the antenna and coaxial feeder connected to the base station....

CDMA Power Amplifier

May 6, 2002 12:03 pm | Comments

RF Micro Devices' RF6000-2 CDMA 50 power amplifier module is ideally suited for low-cost CDMA cellular transmitter applications and has been optimized for CDMA2000 1X. The miniature RF6000-2 is designed using RFMD's advanced third generation HBT process, which provides excellent ACPR, efficiency performance and minimum performance variation over temperature....


CDMA Amplifier Module

May 6, 2002 12:03 pm | Comments

Ophir RF introduces Model 5302360, a 15 W, 3 FA CDMA power amplifier module available in several frequency bands, and operating from 28 V DC. Key features of this new module are higher efficiency (typically 15 - 18%) and 15 watts of mean CDMA power (CDMA signal peak to average ratio of 10....

HBT MMIC Power Amplifiers

May 6, 2002 12:03 pm | Comments

Hittite Microwave introduces a highly efficient family of Heterojunction Bipolar Transistor (HBT) MMIC Power Amplifiers, operating between 4.4 - 7.0 GHz with up to +29 dBm output power. These amplifiers are ideal for low cost UNII and HiperLAN applications from 5.0 - 6.0 GHz. The HMC415LP3 provides 20 dB of gain and +26 dBm of saturated power at 34% PAE from a +3....

Evacuated Miniature Crystal Oscillator

May 6, 2002 11:34 am | Comments

Vectron International has announced the introduction of its Evacuated Miniature Crystal Oscillator (EMXO™). The EX-380/385 series, low profile 4 Pin DIP EMXO is available at selected frequencies from 10 MHz to 80 MHz. The oscillators provide exceptionally low aging rates and high temperature stabilities in a small package over a wide range of environmental conditions....

SiGe Fabrication Process

May 6, 2002 10:49 am | Comments

A new, high-speed Silicon Germanium (SiGe) fabrication process has been brought online by Micrel. This new, 0.6 μm ASSET-2 SiGe process gives Micrel the necessary technology to move into the 10 Gbps communication space. Micrel's new GigaPro™ product line will address high-speed applications with data rates in excess of 10 Gbps....

RF LDMOS Devices

May 6, 2002 7:16 am | Comments

Motorola announced their next generation of RF LDMOS devices designed specifically for the 3G base station infrastructure market. Motorola's new fifth generation high voltage product family (HV5) continues to support the industry as service providers begin to deploy 3G W-CDMA and UMTS wireless systems....

Diode Switch

May 6, 2002 7:16 am | Comments

Agilent Technologies introduced a new low-inductance wideband PIN-diode shunt switch offering industry-leading price and performance levels for applications up to 6 GHz, such as wireless LAN cards and radios. The Agilent HMPP-389T PIN-diode shunt switch combines low inductance, low capacitance and low package parasitics, increasing the maximum frequency at which silicon PIN diodes switches may be used....

Dual Channel Active Filter

May 6, 2002 7:16 am | Comments

Murata introduced an integrated dual-channel active filter device (tentative part number AF-9533) for 5 GHz 802.11a Wireless Local Area Network (WLAN) baseband filtering. Murata's dual-channel anti-aliasing filter utilizes a design concept that consolidates the many discrete components normally required to filter out frequencies above 9 MHz and unwanted and spurious noise into one miniature surface-mount device (9....


You may login with either your assigned username or your e-mail address.
The password field is case sensitive.