Advertisement
Product Releases
Subscribe to Wireless Design and Development

Power Divider/Combiners

April 6, 2001 5:21 am | Comments

MECA recently introduced the "V-Line" family of isolated power divider/combiner. These dual-band (0.800 - 2.000 GHz) dividers are ideally suited for low-cost, high-performance applications with shipment from stock to meet JIT requirements. The 802-2-1.400 (2-way, SMA-Female) measures 1....

MMIC DPDT Diversity Switch

April 6, 2001 5:21 am | Comments

Hittite Microwave introduces a C-band DPDT switch that operates between 5.0 and 6.0 GHz. The HMC393MS8G features 1.2 dB insertion loss and provides P1 dB of 34 dBm with 5 volts bias. This design can operate as an integrated antenna diversity and transmit/receive switch for the HiperLAN and UNII radio platforms providing 20 dB of isolation between antennas and between Tx and Rx ports....

Personal Analyzer Charger

April 6, 2001 5:21 am | Comments

iTECH (Intelligent Technologies LLC) announces the release of IQpac®— personal analyzer charger to the land mobile radio market. IQpac is an addition to iTECH's IQ® line of battery charger/analyzer/conditioners. IQpac features tri-mode operation: "charge,"" quick analyze" to analyze and condition while charging and "spec analyze" to test batteries to specification standards....

Advertisement

Wireless Networking Chip

April 6, 2001 5:20 am | Comments

Philips Semiconductors, a division of Royal Philips Electronics announced the first in a new generation of broadband wireless integrated circuits (ICs) designed to enable high speed, wireless networking in the enterprise, small office and home markets. Philips Semiconductors' new IC, the SA2400, is a fully integrated Zero-IF single-chip radio designed for applications in the IEEE 802....

Upconverter/Driver Integrated Circuit

April 6, 2001 5:20 am | Comments

Maxim Integrated Products announces the MAX2307 miniature upconverter/driver IC with variable gain. It is designed for Japanese N-CDMA and PDC 900 MHz applications in the 900 MHz frequency band. The device features ultra-low current consumption and very small size. Implementation cost is optimized by replacing a SAW filter with a low-cost inductor....

Low Noise Amplifiers

April 6, 2001 5:20 am | Comments

Fujitsu Compound Semiconductor, Inc. (FCSI) announces the expansion of their Low Noise Amplifier (LNA) MMIC product line. FCSI is introducing two new millimeter-wave, high power MMIC amplifier products covering the 24 to 40 GHz frequency band with output power of up to 9 dBm. These new devices are designed for point-to-point or point-to-multipoint radio link and Local Multipoint Distribution System (LMDS) applications....

Vector Network Measurement System

April 6, 2001 5:20 am | Comments

Anritsu Company, a provider in high-performance test and measurement solutions, introduces the MS4600/4B option for its Scorpion® MS46XX RF Vector Network Measurement System (VNMS). The MS4600/4B extends the noise figure frequency of the VNMS to 6 GHz so it can analyze low noise amplifiers (LNAs) and other devices covering the 5....

Power Amplifier Test System

April 6, 2001 5:20 am | Comments

Anritsu Company, a provider in high-performance test and measurement solutions, has enhanced its ME7840A Power Amplifier Test System (PATS) with additional measurement capability, making it the most comprehensive solution for real-time simultaneous tuning of power amplifier parameters. The ME7840A can now conduct ACPR, IMD, PAE, compression, harmonics, and S-parameter measurements with a single connection, thereby creating a turnkey solutio...

Advertisement

Surface-Mount Chip Attenuators

April 6, 2001 5:20 am | Comments

A new series of surface-mount thick film chip attenuators that offers the industry's widest impedance and attenuation range for this device type has been announced by Vishay Intertechnology, Inc. The Vishay Dale CZA chip attenuators will provide improved attenuation in a single device as compared to three or more discrete resistors....

Polyester Film Capacitor

April 6, 2001 5:20 am | Comments

Vishay Intertechnology, Inc. has announced the release of a stacked metallized polyester film capacitor that provides improved pulse handling and self-healing capabilities compared with devices built on conventional wound film technology. Featuring a compact design and superior reliability, the new Vishay Roederstein MKT1826 is specified for a wide capacitance and voltage range, allowing designers to use the component in a variety of applic...

Connector

April 6, 2001 5:20 am | Comments

Miraco, Inc., a leader in the innovation of high density, U.L. recognized connectors, introduces its ADAM Connector. Designed to bypass the space limitations of conventional stamped contacts, the ADAM Connector is the first in a family of connectors that offer greater reliability and flexibility at a reduced cost....

High Density Connector

April 6, 2001 5:20 am | Comments

Miraco, Inc. introduces its CARL™ (Circuit Aligning Restraining Locking system) Connector for the automotive industry. The CARL provides a low cost, easy to install solution that is ideal for instrumentation panel, headliner, and door panel connections. The CARL high-density connector interconnects flexible printed circuits (FPC) to flat flexible cables (FFC)....

Ultra-Slim Omnidirectional Antenna Solution

April 6, 2001 5:20 am | Comments

MAXRAD has developed an ultra-slim omnidirectional antenna solution for mobile and fixed wireless data applications requiring gain and mounting versatility. Originally designed for vehicle on-glass mounting, this remarkably rugged antenna provides trouble-free data coverage in other tough environments including office LANs, factory floors, remote telemetry and other locations where a low profile antenna is required....

Two Antennas For Bluetooth Applications High-Performance Solution

April 6, 2001 5:20 am | Comments

Centurion Wireless Technologies, Inc. introduces two new antennas for Bluetooth applications: the BlueChip™ and the MicroBlue antennas. The BlueChip™ antenna is an internal antenna that offers high-gain performance (> 2.0 dBi) with a wide bandwidth. It's small and lightweight with PCB surface mount-applicable in vertical or horizontal positions without sacrificing performance-and can be delivered in tape and reel packaging....

RF Power Line of Couplers

April 6, 2001 5:20 am | Comments

Anaren Microwave, Inc., announced the introduction of the RF Power Line of 200 watt surface mount directional and 90 degree hybrid couplers. These new couplers increase power capabilities for better performance in an array of amplifier applications including: GSM, CDMA, TDMA, PDC, DCS, WCDMA, UMTS and WLAN....

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading