Product Releases
Subscribe to Wireless Design and Development

Tapped Filter Networks For EMI/RFI Suppression

April 10, 2001 10:03 am | Comments

Tapped filter networks for the suppression of EMI/RFI noised are now available from KOA Speer Electronics. These components are designed to filter out the high frequency content of digital signals and are commonly used in I/O ports and other high frequency/high speed applications. The standard KOA Speer LFA series networks in a low profile, 20-pin QSOP style, can replace 16 individual discrete components....

Coin Cell Holders

April 10, 2001 10:01 am | Comments

Keystone Electronics offers a new holder for quick and easy installation of 2032 lithium coin cells in high density applications. The dual-spring contacts are polarized to assure proper installation. These new holders retain cells securely under shock and vibration. The surface mount version is available in bulk (Part #1060) and on tape and reel (Part #1060TR) and is compatible with most vacuum and mechanical pick and place assembly syste...

Connectivity Tester

April 10, 2001 9:59 am | Comments

The NetTool™ Connectivity Tester combines cable, network, and PC configuration testing in a palm-sized tool. It identifies a jack as Ethernet, Phone, Token Ring, or inactive and checks link pulse for speed, polarity, duplex, level information, and receive pair. It resolves complex PC network configuration issues such as IP address, default getaway, and email and web servers, while showing key network resources used by that PC such as se...


Surface Mount Resistors

April 10, 2001 9:58 am | Comments

Providing manufacturers with a way to restart stalled production lines caused by long lead times for MELF type devices, resistor manufacturer IRC is now offering low-profile surface mount cylindrical resistors. Designated the MM Series, these cylindrical power resistors provide component engineers with drop-in replacements for MELF devices....

USB Medium Access Controller

April 10, 2001 9:56 am | Comments

Intersil announced its Medium Access Controller (MAC) that reduces Bill-of-Materials (BOM) costs and features a USB interface for embedded WLAN applications as well as stand-alone external WLAN modules. BOM savings are achieved by replacing expensive, large footprint flash memory with a smaller Electrically Erasable Programmable Read-only Memory (E PROM)....

Crystal For Data Transmission

April 10, 2001 9:55 am | Comments

International Crystal Manufacturing has released a crystal product intended for critical data transmission applications. The LFN1000 series crystal is manufactured in the TO-5 (HC-35) package and is also good for use in microwave applications. This product offers a range from 10 to 160 MHz and is specified at series resonance and optimal temperatures of 25 ° C or 75 ° C....

Junction Tee and Cable System

April 10, 2001 9:53 am | Comments

Interlink BT has announced the Junction, Tee, and Cable System — a fully connectorized fieldbus system offering system-wide "plug-and-play" convenience. This allows rapid changeover to a connectorized network. System components include FOUNDATION Fieldbus™ junctions and cabling (standard and armored) and IP67 tees that feature standardized minifast ® connectors that streamline changeover and maintenance procedures....

Development Kit For FPGA Designers

April 10, 2001 9:51 am | Comments

Insight Electronics now offers a Virtex-E Development Kit that helps FPGA designers shorten the development cycle and meet their time-to-market requirements. The new kit provides a platform for prototyping and verifying designs based on Xilinx's Virtex-E family of FPGAs. The development kit includes a Virtex-E reference board based on either a 600K-gate or 300K-gate Virtex-E FPGA....


Surface Mount Inductors

April 10, 2001 9:49 am | Comments

Gowanda Electronics is introducing a new series of surface mount inductors. This new wire-wound "CC" series is designed with terminations which result in improved solderability and therefore easier and faster assembly, enhanced system performance, and greater system reliability. This series of surface mount inductors is targeted for use in RF applications in the electronics industry, especially for wireless and test and measuremen...

Power Amplifiers

April 10, 2001 8:38 am | Comments

Fujitsu Compound Semiconductor (FCSI) announces the expansion of their GaAs MMIC Power Amplifier product line. FCSI is introducing four new millimeter-wave, high power MMIC amplifier products covering the 17.5 to 31.5 GHz frequency band with output power ranging between 26 to 31 dBm. These new devices are designed for point-to-point or point-to-multipoint radio link and Local Multipoint Distribution System (LMDS) applications....

Delay Line Filter Assemblies

April 10, 2001 8:36 am | Comments

FSY Microwave has developed a line of Delay Line Filter Assemblies to be used in High Power Feed Forward Amplifier applications. These products are custom designed to OEM specifications. The FSY design uses proprietary techniques to achieve maximum delay in a minimum package size. The assemblies typically consist of a delay line filter with an integrated isolator and couplers....

Monolithic Quartz Filters

April 10, 2001 8:34 am | Comments

The Fox Filter line is built around two-pole, monolithic quartz filters. Due to the inherent high "Q""of quartz, as well as its excellent frequency stability over wide temperature ranges, quartz filters are far superior to those built using ceramic devices and/or those using LC circuitry....

Radio Solution

April 10, 2001 8:32 am | Comments

Ericsson Microelectronics announces a complete Bluetooth radio solution for the growing CDMA cellular market. By incorporating this solution, manufacturers can significantly reduce time-to-market for CDMA mobile phones utilizing Bluetooth wireless technology. The PBA 313 04 Bluetooth radio is a complete transceiver, including all external components except antenna....

Surge Protection

April 10, 2001 8:30 am | Comments

ERICO had added the SEP for Service Entrance Primary protection to its line of CRITEC surge protection devices. The SEP feature ERICO's Transient Discriminating™ (TD™) Technology, which ensures long life under adverse condition. The SEP has a complete instrumentation and diagnostics panel which allows the user to fully monitor the operating status of protection for all equipment....

J-Hook Cable Assemblies

April 10, 2001 8:29 am | Comments

The new CADDY AFAB Series angle brackets from ERICO offer an easy and stable method for installing the line of CADDY CableCat™ J-Hooks to threaded rod or directly to the structure. Specially designed taps expedite assembly and stabilize the J-hooks — eliminating any movement of the J-hook after installation....


You may login with either your assigned username or your e-mail address.
The password field is case sensitive.