Advertisement
Product Releases
Subscribe to Wireless Design and Development

Schottky Barrier Diode Double Balanced Mixer

September 28, 2001 9:40 am | Comments

Elcom Systems Model DBM-1000 is a double balanced mixer housed in a machined case. Frequency range is 5 to 1000 MHz for RF and LO, and DC to 1000 MHz for IF....

Dual Band Tri-mode LNA/Mixer Module

September 28, 2001 9:40 am | Comments

RF Micro Devices introduces the RF3404, a fully integrated dual band front-end module for tri-mode CDMA applications. This SiGe HBT based 8 3 8 mm receive module reduces board area by 70% and decreases bill of materials component count by 22 components. The module features two complete RF downconverters with low noise amplifiers, RF SAW filters, TX LO buffers, and internal RF matching for PCS and cellular band frequencies....

Surface Mount VCXO

September 28, 2001 9:40 am | Comments

Available in frequencies between 750 kHz and 650 MHz, these VCXOs provide either LVPECL or LVDS compatible outputs in a standard 5 × 7 mm leadless ceramic package. The UVV products offer absolute pull ranges (APR) from ± 25 ppm to ± 100 ppm, -40°C to +85°C operation with tri-state and tight (45/55%) symmetry....

Advertisement

Wireless and DSP System Design Tool

September 28, 2001 9:40 am | Comments

Elanix released its latest and most comprehensive version of its SystemView by Elanix® wireless/DSP system design tool. Version 5.0 of SystemView is a significant advance in system-level design with integration with Texas Instruments DSP design tools, increased speed, and improved robustness. SystemView 5....

Low Voltage Differential Signaling Deserializers

September 28, 2001 9:40 am | Comments

Maxim Integrated Products introduces the latest members of the Maxim LVDS family-the MAX9206 and MAX9208 10-bit bus low-voltage differential signaling (BLVDS) deserializers. Together with the MAX9205 and MAX9207 serializers, these products form complete chipsets designed to reduce system interconnect such as backplanes and cables....

Power Management IC

September 28, 2001 9:40 am | Comments

ON Semiconductor announced a new three-phase step down controller, compliant with Intel's latest VRM (voltage regulator module) specification. With single-wire current sharing capability and feature-rich architecture, the CS5305, saves board space, simplifies CPU power supply design for high-performance microprocessors and lowers overall design and manufacturing cost....

TOPICS:

RF Cascode Amplifier Designed for Low Noise

September 28, 2001 9:40 am | Comments

A cost-effective, high isolation cascode amplifier using Silicon Germanium:Carbon (SiGe:C) technology has been introduced by Motorolan's Semiconductor Products Sector. This amplifier can help to simplify RF designs for 100 MHz to 2.5 GHz applications, and it is available in the ultra-small SOT-343R miniature surface mount package....

Power Amplifier Optimized for Linear Operation

September 28, 2001 9:40 am | Comments

Mimix Broadband announced the introduction of a gallium arsenide (GaAs) monolithic microwave integrated circuit (MMIC) two stage power amplifier optimized for linear operation with a typical third order intercept point (IP3) of +36 dBm. Using 0.15 micron gate length GaAs pseudomorphic high electron mobility transistor (pHEMT) device model technology, this power amplifier covers the 26 to 40 GHz frequency bands....

Advertisement

Three Way Power Splitters

September 28, 2001 9:40 am | Comments

Microlab/FXR announces 3 way Power Splitters that are 3G ready, covering the full 800 - 2,200 MHz with high performance specifications. Microlab/FXR Model D3-24FD Three Way Power Splitter evenly splits high power signals with minimal reflections, PIM (passive intermodulation) and minimal insertion loss at powers up to 700 W average power....

High Power Pulsed L Band High Power Pulsed L Band Solid State RF Amplifier

September 28, 2001 9:40 am | Comments

Aethercomm Part Number SSPA 1.20-1.40-100 is a high power, pulsed solid state amplifier used for military telemetry, data transmission and radar. This SSPA supports pulse widths up to 100 mSec with duty cycles from 0.1% to CW operation. Minimum output power is 100 watts at 85°C base plate. The unit will operate from -50°C to 95°C base plate....

SDRAM Multi-Chip Packages

September 28, 2001 9:40 am | Comments

White Electronic Designs' Registered 16 M × 64 and 16 M × 72 synchronous DRAM multi-chip packages are now available. The 128 Mbyte PBGA devices provide a glue-less connection to high performance memory controllers designed to complement PowerPC™ based systems. The registered versions are now available to enhance performance of bus speeds at 66 MHz and 100 MHz....

Complete System Clock Module

September 28, 2001 9:40 am | Comments

Connor Winfield introduces the STM-S3E, a complete system clock module for Stratum 3E timing card applications in accordance with GR-1244-CORE, GR-253-CORE, and ITU-T-G813. The STM-S3E provides a reliable backplane clock reference to line cards for use in TDM, PDH, SONET, and SDH network equipment....

Successive Approximation Register ADC

September 28, 2001 9:40 am | Comments

The AD7484 is a 14-bit SAR (successive approximation register) ADC. It offers a parallel interface with throughput rates up to 3 MSPS. A 12-bit version — the AD7482 — is also available. Interfacing is via standard control lines making the converters directly compatible with microcontrollers and DSPs....

Vertical Power Strips

September 28, 2001 9:40 am | Comments

Pulizzi Engineering released the VPC1917 Vertical Power Strips for use in telecommunication, frame relay, and server racks where maximizing rack space is key to system design. The VPC1917 system stands 70 long × 2 wide × 2 deep and are available in configurations for North America and Europe....

Oscilloscopes

September 28, 2001 9:40 am | Comments

Tektronix recently introduced a new series of mid-range oscilloscopes. The new TDS5000 family of digital phosphor oscilloscopes (DPO) consists of three instruments that offer high-performance features that satisfy the needs of engineers designing electronic products. The 1 GHz, 4 channel TDS5104 allows for accurate viewing of fast clock signals and pulse edges....

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading